05 | 05 | 2021
Industry is currently facing increasing challenges related to resources and the environment, and some sectors have been going to great lengths to control them. Two of the biggest concerns are using...
05 | 05 | 2021
Los aceros inoxidables ferríticos ODS ofrecen excelentes propiedades para ser empleados en los futuros reactores de fusión nuclear, así como para revestimientos de tubos de reactores de IV...
05 | 05 | 2021
Heavy gauge line pipe and structural steel plates are often rolled in the two-phase region for strength reasons. However, strength and toughness show opposite trends, and the exact effect of each...
05 | 05 | 2021
IMG-TESIS-nerea-gonzalez
05 | 05 | 2021
IMG-TESIS-jon-garcia
05 | 05 | 2021
This thesis explored controlled anaerobic fermentation processes to gain insights into the feasibility of treating different sources of organic waste to obtain valuable fermentation bioproducts,...
05 | 05 | 2021
2017
05 | 05 | 2021
La presente tesis muestra la metodología desarrollada para la obtención de recubrimientos funcionales piezoeléctricos y conductores eléctricos. Las etapas llevadas a cabo se corresponden con la...
05 | 05 | 2021
IMG-TESIS-beatriz-perez
05 | 05 | 2021
En esta tesis se han desarrollado materiales de fricción de matriz de metal sinterizado base cobre orientados a la fabricación de discos de embrague para máquinas de gran tonelaje siguiendo dos...
05 | 05 | 2021
PhD Theses
05 | 05 | 2021
Nanostructured materials present different physical properties in comparison to their bulk counterparts and the integration of this type of materials in conventional devices, such as gas sensors,...
05 | 05 | 2021
The numerical modelling is widely employed for the prediction of the railway track dynamic behaviour, which is of utmost importance for the characterisation of the undesired medium-high frequency...
05 | 05 | 2021
IMG-TESIS-imanol-tubia
05 | 05 | 2021
Brettanomyces yeast is considered one of the most relevant spoilage yeasts in the production of alcoholic beverages, especially in wine and cider. During beverages fermentation and later storage,...
05 | 05 | 2021
En la presente tesis doctoral se ha desarrollado un método para generar recubrimientos piezoeléctricos de PZT sobre sustratos metálicos. En primer lugar, se ha profundizado en el estudio del método...
05 | 05 | 2021
IMG-TESIS-ane-miren-florez
05 | 05 | 2021
IMG-TESIS-aitor-lasaosa
06 | 05 | 2021
Fatigue failure accounts for most of mechanical failures in engineering components during service life. Often the failure is sudden, without previous warning. Therefore, crack growth behaviour is a...
06 | 05 | 2021
Ane Miren Florez Análisis de los modos de conducción de un convertidor Trans-qZSI. Caracterización, modelización y estudio comparativo de la topología bidireccional. Diseño y validación...
06 | 05 | 2021
Jaione Ollo Desarrollo de membranas cerámicas de microfiltración mediante procesamiento de bajo coste para el tratamiento de aguas Fecha: 10/02/2016 Director: Jon Etxeberria
06 | 05 | 2021
En la presente tesis doctoral se han desarrollado membranas cerámicas, incluyendo su escalado industrial, con tres tamaños de poro diferentes dentro del rango de la microfiltración. Estas membranas...
06 | 05 | 2021
TIC +info /soluciones-industria/tics bannerX-750x350-tic.jpg
06 | 05 | 2021
FABRICACIÓN INDUSTRIAL +info /soluciones-industria/industrial-y-fabricacion bannerX-750x350-industria.jpg
06 | 05 | 2021
SALUD Y ALlMENTACIÓN +info /soluciones-industria/salud-y-alimentacion bannerX-750x350-salud.jpg
06 | 05 | 2021
Design and validation of an embedded positioning system Ref.: 32-6(16) Modalidad Proyecto Fin Máster Título Design and validation of an embedded positioning system Director Iñigo Adín Tipo Sin...
06 | 05 | 2021
entorno-enlaces
07 | 05 | 2021
VEHÍCULO AUTÓNOMO: COMUNICACIONES 4G Y 5G PARA ENVÍO DE INFORMACIÓN CRITICA
07 | 05 | 2021
SISTEMA DE POSICIONAMIENTO DE PIEZAS PARA REPARACIÓN MEDIANTE FABRICACIÓN ADITIVA
07 | 05 | 2021
SISTEMA DE POSICIONAMIENTO DE PIEZAS PARA REPARACIÓN MEDIANTE FABRICACIÓN ADITIVA
07 | 05 | 2021
Selection Process
19 | 04 | 2021
Tecnun (Escuela de Ingenieros de la Universidad de Navarra) impulsó la creación de Ceit el año 1982. Ambas entidades conviven en el Campus de San Sebastián de la Universidad de Navarra y mantienen...
20 | 04 | 2021
Website https://www.cun.es/ cun.jpg Ceit colabora con la Clínica Universidad de Navarra en proyectos de I+D+ i. Investigadores, médicos y científicos de múltiples disciplinas biomédicas y...
20 | 04 | 2021
alianzas_enlaces-de-interes
20 | 04 | 2021
Información económica +info /documents/24233193/24746198/Informacio%CC%81n+econo%CC%81mica.pdf transparencia-01.png
20 | 04 | 2021
Regional grants
22 | 04 | 2021
Smart maintenance Condition-based maintenance of vehicle and infrastructure Maintenance-related costs account for a very significant amount of the Life Cycle Cost of railway systems. Optimization...
22 | 04 | 2021
Big Data analysis Data cleaning, reconciliation, analysis and visualization The Big Data Analysis group covers the process of extracting valuable information from heterogeneous raw data. The...
22 | 04 | 2021
PERSONA DE CONTACTO Unai Alvarado Email: ualvarado@ceit.es
22 | 04 | 2021
Modelling and characterization of materials and manufacturing processes
22 | 04 | 2021
Industry 4.0 for aeronautics Advanced monitoring and instrumentation systems, using techniques based on electromagnetic signals, ultrasound, microwave and optical sensors Design of ad hoc...
22 | 04 | 2021
PERSONA DE CONTACTO Miren Aristizabal Email: maristizabal@ceit.es
22 | 04 | 2021
PERSONA DE CONTACTO Javier Vadillo Email: jvadillo@ceit.es
22 | 04 | 2021
Modelling and characterization of materials and manufacturing processes Optimal mechanical design of machines and components Design, analysis and theoretical and experimental evaluation of...
22 | 04 | 2021
Industry 4.0 for automotive Advanced monitoring and instrumentation systems, using techniques based on electromagnetic signals, ultrasound, microwave and optical sensors. Design of ad hoc...
22 | 04 | 2021
Intelligent Transport Systems Description Development of systems that improve mobility on highways and in cities, and our strategy is aligned with the research agenda of the entities that lead the...
22 | 04 | 2021
automocion_contenidowebbasico_carrusel
22 | 04 | 2021
medioambiente_enlaces_capacidades
22 | 04 | 2021
Digital solutions in the water sector Ceit has extensive experience in developing digital solutions for water sector systems whose automatic control or data management can lead to optimization of...
22 | 04 | 2021
CircRural4.0 Conversion of small and medium-sized wastewater treatment plants (WWTPs) in rural areas into facilities aimed at resource recovery Financed by: Funder Program: Interreg Sudoe Partners...
22 | 04 | 2021
On-line/Off-line manufacturing quality control through non-destructive testing techniques Description The expertise of Ceit in the development and calibration of customised non destructive testing...
22 | 04 | 2021
Energy Our References Ceit has been working during the last 20 years with the most important companies in the energy sector.
22 | 04 | 2021
Off shore Wind Turbines: Operation & Maintenance Optimization Encompassing optimization for off shore wind turbines Operation & Maintenance (O&M) costs are the main cost driver in offshore energy...
22 | 04 | 2021
Metal powder and laser based manufacturing Functionalization of surfaces and improvement of surface properties by laser Ceit is a pioneering center in using femtosecond (ultrashort pulse) lasers...
22 | 04 | 2021
Health & Food Our References Ceit has been working during the last 25 years with the most important companies in the Health & Food sector. Associates Companies
22 | 04 | 2021
salud-alimentacion_enlaces_proyectos
22 | 04 | 2021
BioMEMS Since the early 90s, Ceit has been working in the field of micro and nanotechnologies. With the rise of Biomedical Engineering in recent years, the knowledge acquired has been applied to...
22 | 04 | 2021
Biomaterials Microtechnologies applied to the field of health have given rise to tools that offer a significant advance for the study of pathologies and the development of their treatments....
28 | 07 | 2020
RESUMEN El sector aeroespacial se caracteriza por su aspecto innovador, el cual se da debido a la alta exigencia tecnológica inherente a este sector. Por ello, los procesos de fabricación,...
28 | 07 | 2020
Borja Elguezabal Título: Simulación del proceso de prensado isostático en caliente mediante modelización por elementos finitos Director: Jon Alkorta Presidente del tribunal de la tesis: Jose...
28 | 07 | 2020
foto Kenny L. Alvarez
28 | 07 | 2020
PhD Thesis, Desmond Kehinde Moru
28 | 07 | 2020
Gorka de Miguel Title: Multi-sensor Fusion for Seamless Navigation in Railway Domain. Defense date: 21/07 Director: Iñigo Adín Marcos President: Roc Berenguer Perez
29 | 07 | 2020
PhD Thesis, Yaiza Tejido
30 | 07 | 2020
Annual Report 2014
30 | 07 | 2020
Annual Report 2015
30 | 07 | 2020
Annual Report 2018
08 | 09 | 2020
Governing Board President José María Rodríguez Ibabe President of Ceit Vocals Iciar Astiasarán Anchía Vice President of Research of University of Navarra Fernando Domingo Osle. Head of the Legal...
31 | 01 | 2020
BOTON_enviar-cv
03 | 02 | 2020
Desarrollo de superficies funcionales de alto valor añadido Ref.: 130219 Fecha límite: 31/03/20 (incluido) Descripción Desarrollo de superficies funcionales de alto valor añadido Se ofrece la...
05 | 02 | 2020
Universidad de Navarra Tecnun https://www.unav.edu https://tecnun.unav.edu ENLACES DE INTERÉS false false
06 | 02 | 2020
R & D Projects Scientific Results Spin-offs R & D Projects Scientific Results Spin-offs R & D Projects Scientific Results Spin-offs # # # <strong>RELATED INFORMATION</strong> false...
10 | 02 | 2020
MAP_talentspace_application-form
11 | 02 | 2020
OBJETIVOS DEL PROYECTO El objetivo del proyecto consiste en la recepción en el uso de la tecnología de comunicaciones ITS-G5, cuya función principal es el envío de mensajes entre la unidad central...
12 | 02 | 2020
MODALIDAD Reparación de piezas mediante fabricación aditiva INVESTIGADOR RESPONSABLE Sergio Ausejo PERFIL CANDIDATO Estudiante de master relacionado con mecánica, fabricación aditiva, o materiales.