Skip to Content
  • EN
    • About Ceit
    • Industrial Sectors
    • Areas of R & D
    • Services and Results
    • Join Ceit
    • EN
      Choose Language

PhD Thesis, Desmond Kehinde Moru

Desmond Kehinde Moru

Desmond Kehinde Moru

 

Title: Improving the pipeline of an optical metrology system.

Defense date: 22 / 07

Director: Diego Borro

President: Alejandro Garcia Alonso

ABSTRACT

Metrology is one of the many applications of machine vision, which has the advantage that allows for the analyzing of a total production batch that leaves an assembly line without supposing a bottleneck. As a result, quality control become a priority in the inspection processes of industrial manufacturing. Due to the advancement of technology and the realizations of Industry 4.0, smart factories demand high precision and accuracy in the measurements and inspection of industrial products. Machine vision technology provide image-based inspection and analysis for such demanding applications. With the use of software, sensors, cameras and robot guidance, such integrated systems can be realized. Machine vision highlights a growing trend in industrial systems. As camera sensors become smarter, the quality of data produced offers accuracy into the systems operations.

This thesis is a study of the typical vision system pipeline, in the different phases, necessary to achieve optimal inspection in an industrial operation. The first step is the study of the light alignment to monitor and achieve an optimal light alignment system, in order to eliminate the effects of misalignment. The algorithm was tested with a not-optimal system to ascertain its efficiency and effectiveness. In the second phase, a deep study of the calibration process is carried out to address the effect of different parameters as the camera focus among others. Endocentric and telecentric lenses are used in the image acquisition and a comparative analysis is obtained using a multivariable statistical analysis to study the influence of each parameter in the calibration process: camera focus, exposure time, calibration plate tilt and number of images used. In the third proposal, an object alignment algorithm is developed to address the challenge of object alignment during a measurement process. Object plane alignment is key point for achieving good repeatability of object measurements in all orientations. A complete study of the impact of every single pipeline phase is carried out in the proposals validation chapter. Finally, a complete 2D machine vision application is developed to determine the precise measurement of gears, at subpixel level, with the potential to improve quality control, reduce downtime and optimize the inspection process. The calibrated vision system was verified by measuring a ground-truth sample gear in a Coordinate Measuring Machine (CMM), using the parameter generated as the nominal value of the outer diameter. A methodical study of the global uncertainty associated with the process is carried out in order to know better the admissible zone for accepting gears.

This thesis try to reach the optimal values in every single phase of the pipeline in order to improve the accuracy of the inspection. The different studies and algorithms developed in this thesis show that it is worthwhile to invest on achieving the optimal values during the different phases of an industrial inspection process.

Notice

The University of Navarra uses cookies to improve its services, generate statistical data and analyze the browsing habits of visitors to its website. This information may be shared with third parties as detailed in the Cookies Policy Statement. By clicking “I agree” or continuing to browse, you consent to the use of these cookies, while reserving the right to reverse the decision at will.

Agree