2018

A. Iza-Mendia, D. Jorge-Badiola, I. Gutierrez, "Modelling of the Strengthening of Ferrite in a Dual-Phase Steel by means of EBSD measurements", Frontiers in Materials Processing Applications, Research and Technology, FIMPART Conference, Bordeaux, France 9-12 July, 2017.

Publication type: Conference Proceedings

J. Garcia-Aguirre, E. Aymerich, M. Esteban-Gutiérrez, "From sewage sludge to VFA: scaling-up the process and comparison with other waste streams/ De lodos a AGV: Escalado del proceso y comparación con otras corrientes residuales", VII Jornada de Lodos de EDAR, Universidad de Barcelona, 22 Noviembre, 2017.

Publication type: Conference Proceedings

Ane M. Florez-Tapia, Javier Vadillo, Jose M. Echeverría, "Fault tolerance of the bidirectional trans quasi-Z-source inverter", International Journal of Electrical Power & Energy Systems.

Publication type: Scientific Journals

Download

I. Lizarralde, T.  Fernández-Arévalo, S. Beltran, E. Ayesa, P. Grau, "Validation of a multi-phase Plant-Wide Model for the description of the aerations system in a WWTP", Water Research, vol. 129, pp. 305-318, 1 February, 2018.

Publication type: Scientific Journals

Download

Jurgi Gonzalez-Chavarri, Laura Parellada-Monreal, Irene Castro-Hurtado, Enrique Castaño, Gemma G. Mandayo, "ZnO nanoneedles grown on chip for selective NO2 detection indoors ", Sensors & Actuators: B. Chemical, vol. 255, part. 2, pp. 1244-1253, February, 2018.

Publication type: Scientific Journals

Download

Marco Satrústegui, Gurutz Artetxe, Ibon Elósegui, Miguel Martinez-Iturralde, Juan C. Ramos, "Wafter design for totally enclosed electric machines", Applied Thermal Engineering, vol. 129, pp. 93-105, 25 January, 2018.

Publication type: Scientific Journals

Download

Imanol Tubía, Jacobo Paredes, E. Pérez-Lorenzo, Sergio Arana, "Brettanomyces bruxellensis growth detection using interdigitated microelectrode based sensors by means of impedance analysis", Sensors and Actuators A: Physical, vol. 269, pp. 175-181, January, 2018.

Publication type: Scientific Journals

Download

J. Aldazabal, C. García-Rosales, A. Martín-Meizoso, N. Ordás, F. Sordo, J.L. Martínez, J. Gil Sevillano, "A comparison of the structure and mechanical properties of commercially pure tungsten rolled plates for the target of the European spallation source", International Journal of Refractory Metals and Hard Materials, vol. 70, pp. 45-55, January, 2018.

Publication type: Scientific Journals

E. Gil, J. Cortés, I. Iturriza, N. Ordás, "XPS and SEM analysis of the surface of gas atomized powder precursor of ODS ferritic steels obtained through the STARS route", Applied Surface Science, vol. 427, Part A, pp. 182-191, 1 January, 2018.

Publication type: Scientific Journals.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

2017

Isasti N., Uranga P., Rodriguez-Ibabe J.M., Lv D.W., Xi J.T., Liu Z.Z., "Application of Modeling in Industrial Production of Nb Microalloyed Steels to Improve Quality and Performance: the TSCR Handan case", The 7th Intern. Conf. on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2017), Qingdao, China, pp. 412-415, 2017.

Publication type: Conference Proceedings.

Research fields: Thermomechanical Treatments

Rodriguez-Ibabe Jose M., Pereda Beatriz, Uranga Pello, Lopez Beatriz, Stalheim Douglas G, Rebellato Marcelo A., "Modelling of Austenite Conditioning in Nb Microalloyed Grades Produced by TSCR Routes", Conferencia invitada. The 7th Intern. Conf. on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2017), Qingdao, China, pp. 383-386, 2017.

Publication type: Conference Proceedings.

Research fields: Thermomechanical Treatments

J. Paredes, M. Chooljian, D. Liepmann, "Designing for micro hot embossing", Libro: ”Design for Manufacturability: New Materials, Technologies and Processes”, ISBN: 978-1259587452, 2017.

Publication type: Book Chapter.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Jon Alkorta, Matthieu Marteleur, Pascal J. Jacques, "Improved simulation based HR-EBSD procedure using image gradient based DIC techniques", Ultramicroscopy, vol. 182, pp. 17-27, November, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Bergara, J.I. Dorado, A. Martín-Meizoso, J.M. Martínez-Esnaola, "Fatigue crack propagation in complex stress fields: experiments and numerical simulations using the extended finite element method (XFEM)", International Journal of Fatigue, vol. 103, pp. 112-121, october, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Ane M. Florez-Tapia, Javier Vadillo, Ander Martin-Villate, Jose M. Echeverría, "Transient analysis of a trans quasi-Z-source inverter working in discontinuous conduction mode", Electric Power Systems Research, vol. 151, pp. 106-114, October, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Leonardo J. Valdivia, Gonzalo Solas, Javier Añorga, Saioa Arrizabalaga, Iñigo Adin, Jaizki Mendizabal, "ETCS ON-BOARD UNIT SAFETY TESTING: SABOTEURS, TESTING STRATEGY AND RESULTS", Promet – Traffic&Transportation, vol. 29, no. 2, pp. 213-223, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Daniel Alonso, Qianyun Zhang, Yue Gao, Daniel Valderas, "UHF passive RFID-based sensor-less system to detect humidity for irrigation monitoring", Microwave and Optical Technology Letters, vol. 59, no. 7, pp. 1709-1715, July 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

Itxaso Montánchez, Anna Chao Kaberdina, Elena Sevillano, Lucía Gallego, Susana Rodríguez-Couto, Vladimir R. Kaberdin, "Isolation of Pseudomonas fluorescens species highly resistant to pentachlorobenzene", Folia Microbiologica, vol. 62, no. 4, pp. 325-334, 2017.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

S. Rodriguez-Couto, "Industrial and environmental applications of white-rot fungi", Mycosphere, vol. 8, no. 3, pp. 456-466, 2017.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

María Anguiano, Carlos Castilla, Martín Maska, Cristina Ederra, Rafael Peláez, Xabier Morales, Gorka Muñoz-Arrieta, Michal Kozubek, Arrate Muñoz-Barrutia, Ana Rouzaut, Sergio Arana, José Manuel García-Aznar, Carlos Ortiz-de-Solorzano, "Characterization of three-dimensional cancer cell migration in mixed collagen-Matrigel scaffolds using microfluidics and image analysis", Plos One, vol. 12, no. 2, artículo no. e0171417, Feb. 6, 2017.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Beatriz López, Jose M. Rodriguez-Ibabe, "Some Metallurgical Issues Concerning Austenite Conditioning in Nb-Ti and Nb-Mo Microalloyed Steels Processed by Near-Net-Shape Casting and Direct Rolling Technologies", Metallurgical and Materials Transactions A, vol. 48, no. 6, pp. 2801-2811, June, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

T. Fernández-Arévalo, I. Lizarralde, F. Fdz-Polanco, S.I. Pérez-Elvira, J.M. Garrido, S. Puig, M. Poch, P. Grau, E. Ayesa, "Quantitative assessment of energy and resource recovery in wastewater treatment plants based on plant-wide simulations", Water Research, vol. 118, pp. 272-288, 1 July, 2017.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Download

Eduardo Granados, Miguel Martinez-Calderon, Mikel Gomez, Ainara Rodriguez, Santiago M. Olaizola, "Photonic structures in diamond based on femtosecond UV laser induced periodic surface structuring (LIPSS)", OPTICS EXPRESS, vol. 25, no. 13, pp. 15330-15335, June 26, 2017.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

Ainara Rodriguez, Miguel Martinez-Calderon, Itziar Fraile, Mikel Gomez-Aranzadi, Santiago Miguel Olaizola, Irene Castro, "Direct Femtosecond Laser Irradiation of Polymeric Substrates for High Resolution Ink-jet Printing of Conductive Lines", Lasers in Manufacturing – World of Photonics Congress, Munich, 26-29 June, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Miguel Martinez-Calderon, Ainara Rodriguez, Mikel Gomez-Aranzadi, , Eduardo Granados, Santiago Miguel Olaizola, "Water condensation enhancement over metallic hierarchical surfaces with controlled wettability fabricated by femtosecond laser", Lasers in Manufacturing – World of Photonics Congress, Munich, 26-29 June, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Antonio Dias, Alex Arriola, R.R. Thomson, Miguel Martinez-Calderon, Mikel Gomez-Aranzadi, Eduardo Granados, Ainara Rodriguez, Santiago Miguel Olaizola, "Volume Polarization gratings inscribed in glass with femtosecond lasers", 2017 Conference on Lasers and Electro-Optics (CLEO) Europe – World of Photonics Congress, Munich, 25-29 June, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

E Oblak, P Riego, L Fallarino, A Martínez-de-Guerenu, F Arizti, A Berger, "Ultrasensitive transverse magneto-optical Kerr effect measurements by means of effective polarization change detection", Journal of Physics D: Applied Physics, vol. 50, no. 23, 23LT01, pp. 1-6, June 14, 2017.

Publication type: Scientific Journal.

Download

L.D. Lledó A, Bertomeu, I. Díaz, J.J. Gil, X. Justo, F.J. Badesa, N. García-Aracil, "HOMEREHAB: Development of Robotic Technology for Post-Stroke Home Tele-Rehabilitation", Jornadas Nacionales de Robótica, Valencia, 8-9 Junio, 2017.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

M.Gabilondo, M. Azcona, N. Burgos, F. Castro, "Desarrollo de tintas conductoras eléctricas de curado UV a partir de partículas metálicas sintetizadas por vías hidrometalúrgicas", VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia. Ciudad Real, 7-9 Junio, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Fraile, I. Castro-Hurtado, M. Azcona, N. Burgos, F. Castro, "SINTERIZACIÓN LÁSER DE RECUBRIMIENTOS CERÁMICOS DE NANOPARTÍCULAS DE PZT DEPOSITADOS MEDIANTE INKJET PRINTING SOBRE SUSTRATOS DE ACERO Y ALÚMINA", VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia Ciudad Real 2017, 7-9 Junio, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Belén López Ezquerra, José Manuel Sánchez, "UNIÓN POR DIFUSIÓN de la aleación WC-11% en peso de Co A ALEACIONES BASE Fe: FUNDICION NODULAR GGG40 VS. ACERO 34CrMo4", VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia Ciudad Real 2017, 7-9 Junio, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Beatriz Pérez, Jon Echeberria, José A. Calero, M. Carmen Monterde, "INFLUENCIA DEL TAMAÑO DE LOS ABRASIVOS EN EL PROCESAMIENTO Y PROPIEDADES DE MATERIALES DE FRICCIÓN DE MATRIZ DE METAL SINTERIZADO", VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, Ciudad Real, 7- 9 Junio, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J.J. Gil, I. Díaz, "Method for Estimating the Stability Boundary of Impedance Haptic Systems", IEEE World of Haptics Conference (WHC). Fürstenfeldbruck (Munich) Germany, 6-9 June, pp. 569-574, 2017.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

Download

Amaia Iza-Mendia, Denis Jorge-Badiola, Isabel Gutiérrez, "Tensile Work Hardening Modeling of Precipitation Strengthened Nb-Microalloyed Steels", Metallurgical and Materials Transactions A, vol. 48, pp. 2943-2948, June, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A. Litnovsky, T. Wegener, F. Klein, Ch. Linsmeier, M. Rasinski, A. Kreter, B. Unterberg, J.W. Coenen, H. Du, J. Mayer, C. Garcia-Rosales, A. Calvo, N. Ordas, "Smart tungsten alloys as a material for the first wall of a future fusion power plant", Nuclear Fusion, vol. 57, no. 6, no. Artículo 066020 (7 pp.), June, 2017.

Publication type: Scientific Journals.

Download

Ainara Jimenez, Andoni Beriain, Juan Francisco Sevillano, Ivan Rebollo, Roc Berenguer, "A 0.6 and 0.395 pJ/bit nonius TDC for a passive RFID pressure sensor tag", Analog Integrated Circuits and Signal Processing, vol. 91, no. 3, pp. 433-444, June, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Download

O. Mitxelena-Iribarren, C. L. Hisey, M. Errazquin-Irigoyen, Y. González-Fernández, E. Imbuluzqueta, M. Mujika, MJ. Blanco-Prieto, S. Arana, "Effectiveness of nanoencapsulated methotrexate against osteosarcoma cells: in vitro cytotoxicity under dynamic conditions", Biomedical Microdevices, vol. 19, no. 35, June, 2017.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Juan Odriozola, Sergio Beltrán, Montse Dalmau, Luis Sancho, Joaquim Comas, Ignasi Rodrígez-Roda, Eduardo Ayesa, "Model-based methodology for the design of optimal control strategies in MBR plants", Water Science &Technology, vol. 75, no. 11, pp. 2546-2553, june 2017.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Download

L. Parellada-Monreal, M. Martinez-Calderón, I. Castro-Hurtado, A. Rodríguez, S. M. Olaizola, M. Gomez-Aranzadi, I. Ayerdi, E. Castaño, G. G. Mandayo, "Temperature simulation at ZnO surface processed by laser interference lithography", Proc. SPIE 10246, Smart Sensors, Actuators, and MEMS VIII, 102461G, May 30, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

A. Arredondo, J. Altuzarra, A. Bergara, J.M. Martínez-Esnaola, J. Aldazabal, "Factores de intensidad de tensiones en eslabones de cadenas offshore", XXXIII Encuentro del Grupo Español de Fractura, Comunicación oral, (ISSN: 0213-3725), Santander, pp. 447-454, 29-31 Marzo, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

M.R. Elizalde, I. Ocaña, J. Alkorta, J.M. Sánchez-Moreno, "Assessing WC-WC interfaces in WC-Co hardmetals through micro-beam testing", 19th Plansee Seminar, Comunicación oral, Reutte, Austria, 29 May-2 June, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

M.R. Elizalde, E. Jimenez-Piqué, H. Jones, I. Ocaña, J. Alkorta, V. Lamela L. Llanes R. Morrell, B. Roebuck, K.P. Mingard, M.G. Gee, J.M. Sánchez-Moreno, "Repeatability of the tests performed on hard metal micro-samples", 19th Plansee Seminar, poster, Reutte, Austria, 29 May-2 June, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

J.M. Sanchez Moreno, B. Lopez Ezquerra, "Comparison of the damage induced by thermal shock in hardmetals and cermets used in hot rolling applications", 19th Plansee Seminar, in Reutte, Austria, 29 May-2 June, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J.M. Sanchez Moreno, B. Lopez Ezquerra, F. Ibarreta Lopez, R. Martinez Pampliega, "EFFECT OF THE CHROMIUM AND CARBON CONTENTS ON THE SINTERING BEHAVIOUR OF TiCN-WC-Ni-Cr3C2 POWDER MIXTURES", 19th Plansee Seminar, in Reutte, Austria, 29 May-2 June, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Jaizki Mendizabal, Jon Goya, Gorka De Miguel, Leonardo Valdivia, Saioa Arrizabalaga, Iñigo Adin, "Virtual testing of the on-board ETCS with GNSS based Train Integrity determination", 15th International Conference on ITS communications, Varsovia, Polonia, 29-31 Mayo, 2017.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Gorka De Miguel, Jon Goya, Julen Uranga, Iñigo Adin, Jaizki Mendizabal, "GNSS Complementary Positioning System Performance in Railway Domain", 15th International Conference on ITS communications, Varsovia, Polonia, 29-31 Mayo, 2017.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

B. Elduayen-Echave, A. Ochoa de Eribe, I. Lizarralde, G. Sánchez, E. Ayesa, P. Grau, "Sensitivity Analysis and Calibration with Bayesian Inference of a Mass-Based Discretized Population Balance Model for Struvite Precipitation", FICWTM: Frontiers International Conference on Wastewater Treatment and Modelling, Palermo, Italy, 21-24 May, 2017.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Download

S. Rodríguez-Couto, "Lignin degradation by the white-rot fungus Trametes pubescens", Poster in The International Symposium on Green Chemistry (ISGC2017). La Rochelle (France), 16-19 May, 2017.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Pello Uranga, "Effect of Processing Parameters on Phase Transformations and Mechanical properties in LC-HSS steels microalloyed with Nb and Mo", Niobium in Steel Workshop, Saarbrücken, Germany, 10-11 May, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Download

Pello Uranga, Nerea Isasti, Jose M. Rodriguez-Ibabe, Douglas G. Stalheim, Vance Kendrick, Brian Frye, Marcelo Rebellato, "Optimized Cost-Effective Production of Structural Hot-Rolled CSP Coils Through Proper Austenite Conditioning", AISTech 2017 Conference Proceedings, Nashville, TN, pp. 2975-2987, 8-11 May 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Olatz Iparraguirre Gil, Borja Nuñez Barrionuevo, Joshua Puerta Prieto, Luis Matey Muñoz, Irantzu Bores, Alfonso Brazalez Guerra, "Multi-sensor Tracking System: Towards More Intelligent Roads", Communication Technologies for Vehicles. 12th International Workshop Nets4Cars/Nets4Trains/Nets4Aircraf 2017, Proceedings. Lecture Notes in Computer Science LNCS vol. 10222, Springer 2017. Toulouse, France, May 4-5, pp. 119-127, 2017.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, ITS and Simulators

Download

Jaizki Mendizabal, Gorka De Miguel, Julen Uranga, Beatriz Sedano, Jon Goya, Iñigo Adin, "On-board electromagnetic interference field-test and evaluation of a non-electrified railway regional line", 12TH INTERNATIONAL WORKSHOP ON COMMUNICATION TECHNOLOGIES FOR VEHICLES, Toulouse, Francia, 4-5 Mayo, 2017. Part of the Lecture Notes in Computer Science book series (LNCS, volume 10222).

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Alain Pirovano, Marion Berbineau, Alexey Vinel, Christophe Guerber, Damien Roque, Jaizki Mendizabal, Hervé Bonneville, Hasnaâ Aniss, Bertrand Ducourthial, "Communication Technologies for Vehicles", Editors of book Proceedings. 12th International Workshop, Nets4Cars/Nets4Trains/Nets4Aircraft 2017, Toulouse, France, May 4-5, 2017.

Publication type: Book.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

David Del Río, Iñaki Gurutzeaga, Ainhoa Rezola, J.F Sevillano, Igone Vélez, Vincent Puyal, Jose Luis González-Jiménez, Roc Berenguer, "A 15-21 GHz I/Q Upconverter with an On-Chip Linearization Circuit for 10 Gbps mm-Wave Links", IEEE Microwave and Wireless Components Letters, vol. 27, no. 5, pp. 512-514, May, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Download

A. Lasaosa, K. Gurruchaga, F. Arizti, A. Martínez-de-Guerenu, "Induction Hardened Layer Characterization and Grinding Burn Detection by Magnetic Barkhausen Noise Analysis", Journal of Nondestructive Evaluation, vol. 36, no. 27, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

Olatz Iparraguirre Gil, Luis Matey Muñoz, Alfonso Brazalez Guerra, Borja Nuñez Barrionuevo, Joshua Puerta Prieto, "Sistema de detección de niebla en tiempo real para su integración en servicios cooperativos", XVII Congreso Español sobre Sistemas Inteligentes de Transporte, Madrid, 25-27 de abril, 2017.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, ITS and Simulators

Alfonso Brazalez Guerra, Borja Nuñez Barrionuevo, Olatz Iparraguirre Gil, Joshua Puerta Prieto, "Sistema avanzado de ayuda a la conducción basado en estímulos no visuales", XVII Congreso Español sobre Sistemas Inteligentes de Transporte, Madrid, 25-27 de abril, 2017.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, ITS and Simulators

Idoia Garcia, Juncal Aldaregia, Jelena Marjanovic Vicentic, Paula Aldaz, Leire Moreno-Cugnon, Sergio Torres-Bayona, Estefania Carrasco-Garcia, Laura Garros-Regulez, Larraitz Egaña, Angel Rubio, Steven Pollard, Milenia Stevanovic, Nicolas Sampron, Ander Matheu, "Oncogenic activity of SOX1 in glioblastoma", Scientific Reports, vol. 7, artículo no. 46575, April 20, 2017.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

Luis M. Guia, Pedro Rodriguez-Canto, Vicente Munoz-Sanjose, Sergio Arana, Candid Reig, "Sensing properties of ZnO nanostructured layers", 2017 Spanish Conference on Electron Devices, CDE 2017, April 19, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, BioMEMS

I.S. Apezetxea, X. Perez, C. Casanueva, A. Alonso, "New methodology for fast prediction of wheel wear evolution", Vehicle System Dynamics, International Journal of Vehicle Mechanics and Mobility, vol. 55, no. 7, pp. 1071-1097, July, 2017.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

Jesús Gutiérrez-Gutiérrez, Marta Zárraga-Rodríguez, Xabier Insausti, Bjorn O. Hogstad, "On the Complexity Reduction of Coding WSS Vector Processes by Using a Sequence of Block Circulant Matrices", Entropy, vol. 19, no. 95, March, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

J. Aldazabal, "Resistencia Residual a Flexión de Estructuras de Madera Expuestas al Fuego", XXXIII Encuentro del Grupo Español de Fractura, Santander, 29-31 Marzo, 2017.

Publication type: tipo_de_publicación.

Research fields: Materials, Multiscale Mechanics of Materials

A. Martín-Meizoso, J. Alkorta, "Notch detection by infrared Thermography", 1st International Symposium on Notch Fracture, Santander, pp. 197-200, 29-31 March, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

S. Cicero, T. García, J.A. Álvarez, F.T. Ibáñez-Gutiérrez, A. Martín-Meizoso, A. Bannister, A. Klimplel, "Propuesta de curva S-N de diseño para aceros estructurales con bordes rectos cortados por plasma", XXXIII Encuentro del Grupo Español de Fractura, Comunicación oral, (ISSN: 0213-3725), Santander, pp. 137-142, 29-31 Marzo, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

S. Cicero, T. García, J.A. Álvarez, F.T. Ibáñez-Gutiérrez, A. Bannister, A. Klimplel, A. Martín-Meizoso, "Propuesta de curva S-N de diseño para chapas de acero estructural con agujeros cortados por láser", XXXIII Encuentro del Grupo Español de Fractura, Comunicación oral, (ISSN: 0213-3725), Santander, pp. 157-162, 29-31 Marzo, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

J. Aldazabal, I. Aldazabal, J. Gil Sevillano, "Simulación de la Respuesta Mecánica de Fibras de Fe Dañadas por Radiación", XXXIII Encuentro del Grupo Español de Fractura, Comunicación oral, Santander, 29-31 Marzo, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

P. Esteban, B. Calleja, R. Caracena, J.B. Jorcin, A. Iza-Mendia, A. López, "Problems Related to the Slow Strain Rate Test Performance and the Specimen Characterization in Austenitic Corrosion Resistant Alloy Tubes", Procs. of CORROSION 2017, NACE International, New Orleans, Louisiana. Paper No. 9715, March 26-30, 2017.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

A. Martínez-de-Guerenu, D. Jorge-Badiola, I. Gutiérrez, "Assessing the recovery and recrystallization kinetics of cold rolled microalloyed steel through coercive field measurements", Materials Science & Engineering A, vol. 691, pp. 42-50, 13 April, 2017.

Publication type: Scientific Journals.

Research fields: Electronics & Communications, Materials, Instrumentation, Sensor and Non Destructive Testing Technologies, Thermomechanical Treatments

Download

Ruben Campo, Fátima Villa, Josu Catalina, Lucía Merino, Miguel Sanz, Daniel Valderas, "Chipless wireless displacement sensor sensitivity analysis for IoT applications", 11th European Conference on Antennas and Propagation (EUCAP), Paris, France, 19-24 March, 2017. Proceedings: IEEE Xplore, pp. 3795-3799, 18 May 2017.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Tugce Akyazi, Nerea Gil-González, L. Basabe-Desmonts, E. Castaño, M.C. Morant-Miñana, Fernando Benito-Lopez, "Manipulation of fluid flow direction in microfluidic paper-based analytical devices with an ionogel negative passive pump", Sensors and Actuators B: Chemical, vol. 247, pp. 114-123, August, 2017.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS, Micro and Nano Systems

Download

Jacobo Paredes, Imanol Tubía, Sergio Arana, "Biofilm impedance monitoring", Libro: ”Handbook of Online and Near-Real-Time Methods in Microorganism Detection”, pp. 102-136, August, 2017.

Publication type: Book Chapters

Download

I. Gutierrez, D. Jorge-Badiola, A. Iza-Mendia, "Progress in mechanical property models for steel", Frontiers in Materials Processing Applications, Research and Technology, FIMPART Conference, Bordeaux, France 9-12 July, 2017.

Publication type: Conference Proceedings

Imanol Tubía, Jacobo Paredes, Eva Pérez-Lorenzo, Sergio Arana, "Detección de Brettanomyces bruxellensis mediante medidas de impedancia con sensores basados en microelectrodos interdigitados", CASEIB 2017, XXXV Congreso Anual de la Sociedad Española de Ingeniería Biomédica,  Bilbao, 29 noviembre-1 diciembre, 2017.

Publication type: Conference Proceedings

Nerea Gil-González, CQ. Chen, Tugce Akyazi, A. Rodríguez, M. Knez, E. Castaño, F. Benito-Lopez, M.C. Morant-Miñana, "AZO-IDEs for monitoring stimuli responsive ionogels", XIV reunión Ibernam. Tordesillas, 28-29 de Septiembre, 2017.

Publication type: Conference Proceedings

M. Moreno-Sereno, N. Pérez, G. Domenech-Gil, L. Parellada, M. Martínez-Calderón, M. Gómez-Aranzadi, N. Darwish, G.G. Mandayo, A. Romano-Rodriguez, "Laser Interferometry for broad area SPR-grating couplers in chemical applications", Proceedings of Eurosensors 2017, Paris, France, 3-6 September, 2017.

Publication type: Conference Proceedings

Download

J. Campisi, I. Martínez de Apellániz, S. Lizarbe-Sancha, I. Arranz-Bárcena, O. Mitxelena-Iribarren, V. Zhukova, A. Zhukov, S. Arana, M. Mujika, "The Use of Magnetic Microwires in Promoting Osteosarcoma Cell Death In Vitro", BMES Annual Meeting, Phoenix, 11-14 October, 2017.

Publication type: Conference Proceedings

J. Zabalo Carrere, O. Mitxelena Iribarren, "Integración de microestructuras en dispositivos microfluídicos para la optimización de la interacción tratamientos-monocapa celular en estudios citotóxicos", CASEIB 2017, XXXV Congreso Anual de la Sociedad Española de Ingeniería Biomédica,  Bilbao, 29 noviembre-1 diciembre, 2017.

Publication type: Conference Proceedings

I. Arranz-Bárcena, J. Campisi, I. Martínez de  Apellániz, S. Lizarbe-Sancha, O. Mitxelena-Iribarren, S. Arana, V. Zhukova, M. Mujika, A. Zhukov, "Utilización de microhilos magnéticos para promover la muerte de células de osteosarcoma mediante hipertermia magnética in vitro", CASEIB 2017, XXXV Congreso Anual de la Sociedad Española de Ingeniería Biomédica,  Bilbao, 29 noviembre-1 diciembre, 2017.

Publication type: Conference Proceedings

O. Mitxelena-Iribarren, Y. González-Fernández, E. Imbuluzqueta,  M. Mujika, MJ. Blanco-Prieto, S. Arana, "Encapsulated vs. Free methotrexate to demonstrate nanovehicle effectiveness against osteosarcoma", The 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2017), Savannah, October 22-26, 2017 .

Publication type: Conference Proceedings

O. Mitxelena-Iribarren, Y. González-Fernández, E. Imbuluzqueta,  M. Mujika, MJ. Blanco-Prieto, S. Arana, "MICROFLUIDICS FOR THE ASSESSMENT OF THE EFFECTIVENESS OF NANOENCAPSULATED METHOTREXATE AGAINST OSTEOSARCOMA", The 3rd Conference on Microfluidic Handling Systems, 4-6 October, 2017.

Publication type: Conference Proceedings

Colin Hisey, Oihane Mitxelena-Iribarren, Miguel Martinez-Calderon, Sergio Arana, Maite Mujika, S.M. Olaizola, Derek J. Hansford, "Cancer Cell Trapping and Migration in a Microfluidic Device for Anti-Migration Drug Screening", The 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2017), Savannah, October 22-26, 2017.

Publication type: Conference Proceedings

Yaiza Tejido-Nuñez, Jon Garcia-Aguirre, Myriam Esteban-Gutierrez, Luis Sancho, Luis Larrea, Enrique Aymerich, "Evaluación del estado del tratamiento de las aguas residuales en la India: Proyecto SARASWATI- Supporting consolidation, replication and up-scaling of sustainable wastewater treatment and reuse technologies for India", Congreso YWP Spain 2017, Bilbao, 16-18 Noviembre, 2017.

Publication type: Conference Proceedings

Yaiza Tejido-Núñez, Agirtze Dominguez Suárez, Begoña Gondra, Luis Larrea, "Gestión sostenible del agua en la industria acuícola", Congreso YWP Spain 2017, Bilbao, 16-18 Noviembre, 2017.

Publication type: Conference Proceedings

Beñat Elduayen-Echave, Izaro Lizarralde, Gorka S. Larraona, Eduardo Ayesa, Paloma Grau, "Advanced Simulation Tools for Element Recovery from Wastewater by Precipitation Process", Congreso YWP Spain, Bilbao, 16-18 Noviembre, 2017.

Publication type: Conference Proceedings

Tamara Fernández-Arévalo, Luis Miguel García, Alain Castro, Alberto Ciriza, Mónica Gutierrez, Luis Sancho, "LIFE VERTALIM: Plataforma virtual de simulación para el control de los vertidos de la industria conservera", Congreso YWP Spain 2017- Bilbao, 16-18 Noviembre, 2017.

Publication type: Conference Proceedings

Tamara Fernández-Arévalo, Ion Irizar, Eduardo Ayesa, "Gestión integral de la EDAR de Arazuri: Estudio por simulación para la optimización de la eliminación/recuperación de nutrientes", Congreso YWP Spain 2017- Bilbao, 16-18 Noviembre, 2017 .

Publication type: Conference Proceedings

Tamara Fernández-Arévalo, Eduardo Ayesa, "Optimización del diseño y la operación de las estaciones depuradoras de aguas residuales mediante herramientas de simulación", 60º Congreso Internacional del agua, saneamiento, ambiente y energías renovables (ACODAL), Cartagena de Indias, Colombia, 31 de mayo – 2 de junio, 2017.

Publication type: Conference Proceedings

Iñigo Adin, "Evaluation of UNISIG proposal for Rolling Stock emission measurement methodology", TEST4RAIL, Braunschweig, 17-18 October, 2017.

Publication type: Conference Proceedings

F. van den Berg, P. Kok, H. Yang, M. Aarnts, W. Beugeling, P. Meilland, T. Kebe, M. Stolzenberg, D. Krix, A.J. Peyton, W. Zhu, A. Martinez-de-Guerenu, I. Gutierrez, D. Jorge-Badiola, M. Malmström, E. L. Ulmgren, A. Volker, A. Duijster, H. Wirdelius, A. Boström, C. Mocci, M. Vannucci, V. Colla, C. Davis, L. Zhou, R. Schmidt, S. Labbé, C. Reboud, A. Skarlatos, V. Leconte, P. Lombard, "Product Uniformity Control (PUC) – How 15 European research institutes contribute to improve the in-line characterisation of microstructure and mechanical properties in the manufacturing of steel strip", In-line measurement and control for metals processing 2017, Warwick, England, 6-7 December, 2017.

Publication type: Conference Proceedings

A. Martínez-de-Guerenu, D. Jorge-Badiola, A. Lasaosa, I. Gutierrez, "Comparative sensitivity study of magnetic hysteresis loops and Barkhausen noise for the non-destructive characterisation of dual-phase and mixed microstructures", In-line measurement and control for metals processing 2017, Warwick, England, 6-7 December, 2017.

Publication type: Conference Proceedings

K. Gurruchaga, I. Artetxe, A. Lasaosa, A. Martínez-de-Guereñu, F. Arizti, R. Leunda, "Sistema automático de inspección de árboles de levas mediante la técnica de emisión magnética de Barkhausen", Póster - 21 Congreso de Máquinas-Herramienta (21CMH), Machine-Tool and Manufacturing Technologies Congress, The Future of Advanced Manufacturing, San Sebastián, 25-27 octubre, 2017

.Publication type: Conference Proceedings

F. van den Berg, P.J.J. Kok, H. Yang, M.P. Aarnts, P. Meilland, T. Kebe, M. Stolzenberg, D. Krix, W. Zhu, A.J. Peyton, A. Martinez-de-Guerenu, I. Gutierrez, D. Jorge-Badiola, M. Malmström, A. Volker, A. Duijster, H. Wirdelius, A. Boström, C. Mocci, M. Vannucci, V. Colla, C. Davis, L. Zhou, R. Schmidt, S. Labbé, C. Reboud, A. Skarlatos, V. Leconte, P. Lombard, "Product Uniformity Control – A Research Collaboration of European Steel Industries to Non-Destructive Evaluation of Microstructure and Mechanical Properties", XXII International Workshop on Electromagnetic Nondestructive Evaluation, Saclay, France, 6-8 September, 2017.

Publication type: Conference Proceedings

A. Skarlatos, A. Martínez-de-Guerenu, R. Miorelli, A. Lasaosa, C. Reboud, "Use of meta-modelling for identification and interpolation of parametric hysteresis models applied to the characterization of carbon steels", 11th Symposium on Hysteresis Modeling and Micromagnetics (HMM 2017), Barcelona, Spain, 29-31 May, 2017.

Publication type: Conference Proceedings

Alvaro Bertelsen, Davide Scorza, Ccamilo Cortés, Jon Oñativia, Álvaro Escudero, Emilio Sánchez, Jorge Presa, "Collaborative Robots for Surgical Applications", ROBOT2017, Third Iberian Robotics Conference. Sevilla (Spain), 22-24 November, 2017.

Publication type: Conference Proceedings

Carlota Soto, Carmen García-Rosales, Jon Echeberria, Jose M. Martínez-Esnaola, Teresa Hernández, Marta Malo, "DEVELOPMENT OF POROUS SIC USING THE SACRIFICIAL TEMPLATE TECHNIQUE FOR NUCLEAR FUSION APPLICATIONS", ECerS2017 Conference, Budapest, Hungría, 10-14 Julio, 2017.

Publication type: Conference Proceedings

B. Lopez Ezquerra, Lorena Lozada, J.M. Sanchez Moreno, Henk van den Berg, Manfred Wolf,, "Thermal shock resistance of cemented carbides with high binder phase content: Comparison between Co and Co-Ni-Cr based binders", Euro PM2017, Milan, Italy, 1-5 October, 2017.

Publication type: Conference Proceedings

J. Alkorta, J.M. Martinez-Esnaola, P. De Jaeger, J. Gil Sevillano, "New mesoscopic constitutive model for deformation of pearlitic steels up to moderate strains", IOP Conference Series: Materials Science and Engineering, vol. 219, conference 1, 2017.

Publication type: Conference Proceedings

Fengxiang Lin, Matthieu Marteleur, Jon Alkorta, Pascal J. Jaques, Laurent Delannay, "Local stress field induced by twinning in a metastable β titanium alloy", IOP Conference Series: Materials Science and Engineering, vol. 219, conference 1, 2017.

Publication type: Conference Proceedings

Download

F.D. Murari, A.A. Santos, B. Pereda, J.M. Rodríguez-Ibabe, M.A. Rebellato, "Efeito Do Tempo De Encharque na Dissolução de Precipitados e nas Propriedades Mecânicas de Chapas Grossas de Aços Microligados", Procs. 54º Seminário de Laminação e Conformação, ABM WEEK 2017, Rio de Janeiro, pp. 198-209, 2017.

Publication type: Conference Proceedings

M.C. Taboada, I. Gutierrez, D. Jorge-Badiola, "Aceros avanzados de alta resistencia con matriz bainítica: evolución de la microestructura y la nanodureza durante tratamientos de temple bainítico", Congreso Tratermat 2017, Linares (Jaen), 3-6 Octubre, 2017.

Publication type: Conference Proceedings

G. Larzábal, N. Isasti, J.M. Rodriguez Ibabe, P. Uranga, "Aumento de la resistencia mecánica mediante tratamientos por inducción en planchones de acero microaleados laminados en caliente", Congreso Tratermat 2017, Linares (Jaen), 3-6 Octubre, 2017.

Publication type: Conference Proceedings

B. Pereda, B. López, J.M. Rodriguez Ibabe, "Retos de la aplicación del Nb en los tratamientos termomecánicos de aceros para productos largos", Congreso Tratermat 2017, Linares (Jaen), 3-6 Octubre, 2017.

Publication type: Conference Proceedings

L. Sanz, B. Pereda, B. López, J.M. Rodríguez-Ibabe, "Effect of texture, crystal anisotropy and microstructural heterogeneity on the Charpy impact toughness behaviour of low carbon steels", European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 2017, Thessaloniki, Greece, 12-17 September, 2017.

Publication type: Conference Proceedings

Eduardo Granados, Miguel Martinez-Calderon, Jacek Krzywinski, Eckhard Wörner, Ainara Rodriguez, Miguel Gomez Aranzadi, Santiago M. Olaizola, "Enhancement of surface area and wettability properties of boron doped diamond by femtosecond laser-induced periodic surface structuring", Optical Materials Express, vol. 7, no. 9, pp. 3389-3396, september 1, 2017.

Publication type: Scientific Journals

Download

Singh A, Kamble SJ, Sawant M, Chakravarthy Y, Kazmi A, Aymerich E, Starkl M, Ghangrekar M, Philip L., "Technical, hygiene, economic, and life cycle assessment of full-scale moving bed biofilm reactors for wastewater treatment in India", Environmental Science and Pollution Research, November, 2017.

Publication type: Scientific Journals

Download

H. Mohamed, B. Miloud, F. Zohra, J.M. García-Arenzana, A. Veloso, S. Rodríguez-Couto, "Isolation and Characterization of Actinobacteria from Algerian Sahara Soils with Antimicrobial Activities", International Journal of Molecular and Cellular Medicine, vol. 6, no. 2, pp. 109-120, july, 2017.

Publication type: Scientific Journals

Download

Jesús Gutiérrez-Gutiérrez, Pedro M. Crespo, Marta Zárraga-Rodríguez, Olav Hogstad, "Asymptotically Equivalent Sequences of Matrices and Capacity of a Discrete-Time Gaussian MIMO Channel With Memory", IEEE Transactions on Information Theory, vol. 63, no. 9, pp. 6000-6003, September, 2017.

Publication type: Scientific Journals

Download

Iñaki Ortego-Isasa, Kami Pars Benli, Félix Casado, Juan Ignacio Sancho, Daniel Valderas, "Topology Analysis of Wireless Power Transfer Systems Manufactured Via Inkjet Printing Technology", IEEE Transactions on Industrial Electronics, vol. 64, no. 10, pp. 7749-7757, October, 2017.

Publication type: Scientific Journals

Download

David del Río, Iñaki Gurutzeaga, Ainhoa Rezola, Juan F. Sevillano, Igone Vélez, Sten E. Gunnarsson, Nataly Tamir, Carlos E. Saavedra, José Luis Gonzalez-Jimenez, Alexandre Siligaris, Cédric Dehos, Roc Berenguer, "A Wideband and High-Linearity E-band Transmitter Integrated in a 55-nm SiGe Technology for Backhaul Point-to-Point 10-Gb/s Links", IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 8, pp. 2990-3001, Agust, 2017.

Publication type: Scientific Journals

Download

P. Lindh, I. Petrov, J. Pyrhönen, M. Satrústegui, M. Martinez-Iturralde, A. Jaatinen-Värri, A. Grönman, "Direct Liquid Cooling Method verified with an Axial-Flux Permanent-Magnet Traction Machine Prototype", IEEE Transactions on Industrial Electronics, vol. 64, no.8, pp. 6086-6095, August, 2017.

Publication type: Scientific Journals

Download

Ibanez Federico, Echeverria Jose, Fontan Luis, "Master-slave DC droop control for paralleling auxiliary DC/DC converters in electric bus applications", IET Power Electronics, vol. 10, no. 10, pp. 1156-1164, Agust, 2017.

Publication type: Scientific Journals

Download

C. Lu, J. Melendez, J.M. Martínez-Esnaola, "Fatigue damage prediction in multiaxial loading using a new energy-based parameter", International Journal of Fatigue, vol. 104, pp. 99-111, November, 2017.

Publication type: Scientific Journals

Download

C. Lu, J. Melendez, J.M. Martinez-Esnaola, "Prediction of crack initiation plane direction in high-cycle multiaxial fatigue with in-phase and out-of-phase loading", Fatigue & Fracture of Engineering Materials & Structures, vol. 40, no. 12, pp. 1994-2007, December, 2017.

Publication type: Scientific Journals

Download

L. Sanz, B. Pereda, B. López, "Validation and Analysis of the Parameters for Reconstructing the Austenite Phase from Martensite Electron Backscatter Diffraction Data", Metallurgical and Materials Transactions A, vol. 48, no. 11, pp. 5258–5272, 2017.

Publication type: Scientific Journals

Download

Kattalin Echegaray, Ion Andreu, Ane Lazkano, Iñaki Villanueva, Alberto Sáenz, María Reyes Elizalde, Tomás Echeverría, Begoña López, Asier Garro, Arantxa González, Elena Zubillaga, Itziar Solla, Iñaki Sanz, Jesús González, Alberto Elósegui-Artola, Pere Roca-Cusachs, Javier Díez, Susana Ravassa, Ramón Querejeta, "Papel del colágeno miocárdico en la estenosis aórtica grave con fracción de eyección conservada y síntomas de insuficiencia cardiaca", Revista Española de Cardiología, vol. 70, no. 10, , pp. 832-840, October, 2017.

Publication type: Scientific Journals

Download

 

Kiana Aran, Marc Chooljian, Jacobo Paredes, Mohammad Rafi, Kunwoo Lee, Allison Y. Kim, Jeanny An, Jennifer F. Yau, Helen Chum, Irina Conboy, Niren Murthy, Dorian Liepmann, "An oral microjet vaccination system elicits antibody production in rabbits", Science Translational Medicine, vol. 9, no. 380, eaaf6413, 8 march, 2017.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

Download

J. Garcia-Aguirre, E. Aymerich, J. González-Mtnez. De Goñi, M. Esteban-Gutiérrez, "Selective VFA production potential from organic waste streams: Assessing temperature and pH influence", Bioresource Technology, vol. 244, pp. 1081-1088, November, 2017.

Publication type: Scientific Journals

Download

Kattalin Echegaraya, Ion Andreu, Ane Lazkano, Iñaki Villanueva, Alberto Sáenz, María Reyes Elizalde, Tomás Echeverría, Begoña López, Asier Garro, Arantxa González, Elena Zubillaga, Itziar Solla, Iñaki Sanz, Jesús González, Alberto Elósegui-Artola, Pere Roca-Cusachs, Javier Díez, Susana Ravassa, Ramón Querejeta, "Role of Myocardial Collagen in Severe Aortic Stenosis with Preserved Ejection Fraction and Symptoms of Heart Failure", Revista Española de Cardiología (English Edition), vol. 70, No. 10, pp. 832-840, October, 2017.

Publication type: Scientific Journals

Download

Marco Satrústegui, Miguel Martinez-Iturralde, Juan C. Ramos, Patxi Gonzalez, Gorka Astarbe, Ibon Elosegui, "Design criteria for water cooled systems of induction machines", Applied Thermal Engineering, vol. 114, pp. 1018-1028, 5 March, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Andrzej Klimpel, Wojciech Cholewa, Adam Bannister, Krzysztof Luksa, Piotr Przystalka, Tomasz Rogala, Damian Skupnik, Sergio Cicero, Antonio Martín-Meizoso, "Experimental investigations of the influence of laser beam and plasma are cutting parameters on edge quality of high-strenght low-alloy (HSLA) strip and plates", International Journal of Advanced Manufacturing Technology, vol. 92, no. 1-4, pp. 699-713, September 2017.

Publication type: Scientific Journals

Download

Ane M. Florez-Tapia, Federico M. Ibanez, Javier Vadillo, Ibon Elosegui, Jose M. Echeverria, "Small signal modeling and transient analysis of a Trans quasi-Z-source inverter", Electric Power Systems Research, vol. 144, pp. 52-62, March, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Iñigo Jauregi, Hector Solar, Andoni Beriain, Ibon Zalbide, Ainara Jimenez, Iñaki Galarraga, Roc Berenguer , "UHF RFID temperature sensor assisted with body-heat dissipation energy harvesting", IEEE Sensors Journal, vol. 17, no. 5, pp. 1471-1478, March 1, 2017.

Publication type: Scientific Journals.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

R. Yehia, S. Rodríguez-Couto, "Discoloration of the azo dye Congo Red by manganese-dependent peroxidase from Pleurotus sajor caju", Applied Biochemistry and Microbiology, vol. 53, no. 2, pp. 222-229, March, 2017.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Moritz T. Lessmann, Ivan Sudic, Stjepko Fazinic, Tonci Tadic, Aida Calvo, Christopher D. Hardie, Michael Porton, Carmen García-Rosales, Paul M. Mummery, "The effects of ion irradiation on the micromechanical fracture strength and hardness of a self-passivating tunsgen alloy", Journal of Nuclear Materials, vol. 486, Pages 34-43, 1 April, 2017.

Publication type: Scientific Journal

Research fields: Multiscale Mechanics of Materials

Download

L. Llanos, B. Pereda, B. López, J.M. Rodríguez-Ibabe, "Modelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying Contents", Materials Science Forum, vol. 879, pp. 1465-1470, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

L. Sanz, B. Pereda, B. López, "Analysis of the Static Recrystallization Behaviour of Nb-Ti Microalloyed Steels Including Low Strain Levels", Materials Science Forum, vol. 879, pp. 1170-1175, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

M.C. Taboada, I. Gutiérrez, D. Jorge-Badiola, S.M.C. Van Bohemen, F. Hisker, G. Paul, "Influence of the processing variables on the microstructure evolution of a bainitic carbide-free steel", Materials Science Forum, vol. 879, pp. 867-872, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

Gorka Larzabal, Nerea Isasti, Jose M. Rodriguez-Ibabe, Pello Uranga, "Evaluating Strengthening and Impact Toughness Mechanisms for Ferritic and Bainitic Microstructures in Nb, Nb-Mo and Ti-Mo Microalloyed Steels", Metals, vol. 7, no. 65, 22 February, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

C. Lu, J. Melendez, J.M. Martiznez-Esnaola, "Fatigue damage prediction in multiaxial loading based on a new energy-based parameter", International Journal of Fatigue, vol. 104, pp. 99-111, November, 2017.

Publication type: Scientific Journals

Download

Iñigo Apaolaza, Edurne San José-Eneriz, Luis Tobalina, Estíbaliz Miranda, Leire Garate, Xabier Agirre, Felipe Prósper, Francisco J. Planes, "An in-silico approach to predict and exploit synthetic lethality in cancer metabolism", Nature Communications, vol. 8, artículo no. 459, september 6, 2017.

Publication type: Scientific Journals

Download

L. Sanz, B. Pereda, B. López, "Effect of thermomechanical treatment and coiling temperature on the strengthening mechanisms of low carbon steels microalloyed with Nb", Materials Science & Engineering A, vol. 685, pp. 377–390, 8 February, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

Nerea Gil-González, T. Akyazi, E. Castaño, F. Benito-Lopez, M.C. Morant-Miñana, "Electrochemical characterization of ionogel actuators", 11th Spanish Conference on Electron Devices. Barcelona, 8-10 de febrero, 2017.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Micro and Nano Systems

J. González-Chávarri, E. Hammes, L. Parellada, I. Castro-Hurtado, E. Castaño, I. Ayerdi, H. Knapp, G.G. Mandayo, "Multisensor platform for indoor air quality measurements", 11th Spanish Conference on Electron Devices, Barcelona, 8-10 febrero, 2017.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Fernández-Arévalo, T., Lizarralde, I., Maiza, M., Beltrán, S., Grau, P., Ayesa, E., "Diagnosis and optimization of WWTPs using the PWM library: Full-scale experiences", Water Science and Technology (WST), vol. 75, no. 3, pp. 518-529, February, 2017.

Publication type: Scientific Journal.

Download

J. Paredes, B. Prieto, I. Elósegui, M. Martinez-Iturralde, "Design of a high-speed synchronous reluctance starter-generator for aircraft applications", More Electric Aircraft Congress (MEA2017), Bordeaux, February 2017.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Industrial and Power Systems

B. López, J.M. Rodriguez-Ibabe, "Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels", Materials Science Forum, vol. 879, pp. 84-89, 2017.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

Ibai Leizea, Ainitze Mendizabal, Hugo Alvarez, Iker Aguinaga, Diego Borro, Emilio Sanchez, "Real-Time Visual Tracking of Deformable Objects in Robot-Assisted Surgery", IEEE Computer Graphics and Applications, vol. 37, no. 1, pp. 56-68, Jan.-Feb., 2017.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Agnieszka Betzwar Kotas, Herbert Danninger, Briggitte Weiss, Ken Mingard, Jose Sanchez, Luis Llanes, "Fatigue testing and properties of hardmetals in the gigacycle range", International Journal of Refractory Metals and Hard Materials, vol. 62, Part B, pp. 183-191, January, 2017.

Publication type: Scientific Journal.

Research fields: Consolidation of Metallic and Ceramic Powders

Download

B. Lopez Ezquerra, R. Gonzalez Ojeda, I. Iparraguirre, N. Rodriguez, J.M. Sanchez-Moreno, "Presintering of TiCN-TiC-WC-Cr3C2-Ni cermets under N2-H2 atmospheres", International Journal of Refractory Metals and Hard Materials, vol. 62, Part A, pp. 21-28, January, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Vladeanu, Calin; Banica, Ion; Hogstad, Bjorn Olav; Patzold, Matthias; Sterian, Corneliu Eugen D., "Combining super-orthogonal space-frequency trellis coding, constellation shaping by shell mapping, and OFDM for high data rate broadband mobile communications", Transactions on Emerging Telecommunications Technologies, vol. 28, no. 1, 1 January, 2017.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

S. Cicero, T. García, J.A. Álvarez, A. Klimpel, A. Bannister, A. Martín-Meizoso, "Fatigue behaviour and BS7608 fatigue classes of steels with thermally cut holes", Journal of Constructional Steel Research, vol. 128, pp. 74-83, 1 January, 2017.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

2016

Aitor Arriola, Pedro Manuel Rodríguez, Raúl Torrego, Félix Casado, Zaloa Fernández, Mikel Mendicute, Eñaut Muxika, Juan Ignacio Sancho, Iñaki Val, "FPGA-Based Cognitive Radio Platform with Reconfigurable Front-End and Antenna", Book: Computing Platforms for Software-Defined Radio, pp. 165-187, 30 December, 2016.

Publication type: Book Chapter.

Research fields: Electronics & Communications, Embedded Systems and Networks, Integrated Circuits Design & Antennas

Download

 

S. Rodríguez-Couto, "Potential of white-rot fungi to treat xenobiotic-containing wastewater", Fungal Applications in Sustainable Environmental Biotechnology. Purchase, D., Halm, B. (Eds.). Springer International Publishing, Switzerland. ISBN 978-3-319-42850-5, pp. 91-113, 2016.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

G. Li-Destri, A. Tummino, A. A. Malfatti Gasperini, L. Parellada Monreal, G. M. L. Messina, V. Spampinato, G. Ceccone and O. Konovalov, Filling nanoporous polymer thin films: an easy route toward the full control of the 3D nanostructure"", RSC Advances, vol. 6, no. 11, pp. 9175-9179, 2016.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

A. Calvo, C. García-Rosales, F. Koch, N. Ordás, I. Iturriza, H. Greuner, G. Pintsuk, C. Sarbu, "Manufacturing and testing of self-passivating tungsten alloys of different composition", Nuclear Materials and Energy, vol. 9, pp. 422-429, December, 2016.

Publication type: Scientific Journal.

Research fields: Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

Lara Rodriguez, Christian Pinedo, Igor Lopez, Marina Aguado, Jasone Astorga, Marivi Higuero, Iñigo Adin, Guillermo Bistué, Jaizki Mendizabal, "Eurobalise-Train communication modelling to assess interferences in railway control signalling systems", Network Protocol and Algorithms, vol. 8, no. 1, pp. 58-72, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Nerea Gil-González, T, Akyazi, A. Zuzuarregi, E. Castano, F. Benito-López, M.C. Morant-Miñana, "Understanding the behavior of stimuli-response ionogels for microfluidic applications", Procedia Engineering, vol. 168, pp. 473-476, 2016.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

Carlos Garcia-Mateo, Jose A. Jimenez, Belen Lopez-Ezquerra, Rosalia Rementeria, Lucia Morales-Rivas, Matthias Kuntz, Francisca G. Caballero, "Analyzing the scale of the bainitic ferrite plates by XRD, SEM and TEM", Materials Characterization, vol. 122, pp. 83-89, December, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

S. Rodríguez-Couto, "Microbial laccases as potential eco-friendly biocatalysts for the food processing industries ", Microbial Enzyme Technology in Food Applications. Ramesh, C.R., Rosell, C.M. (Eds.). CRC-Science (Taylor&Francis Group), USA, ISBN 978-1-498-74983-1, pp. 257-270, 2016.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Moritz T. Lessmann, Aida Calvo, Christopher D. Hardie, Michael Porton, Nerea Ordás, Carmen García-Rosales, Paul M. Mummery, "Fracture strength testing of a self-passivating tungsten alloy at the micrometre scale", Philosophical Magazine, vol. 96, no. 32-34, pp. 3570-3585, December 1, 2016.

Publication type: Scientific Journal.

Research fields: Multiscale Mechanics of Materials

Download

Jesus Manuel Alegre, Antonio Martin-Meizoso, "TAFMEC Special Issue on Small Scale Testing in Fracture Mechanics", Theoretical and Applied Fracture Mechanics, vol. 86, pp. 1, Part A, December, 2016.

Publication type: Scientific Journal.

Research fields: Multiscale Mechanics of Materials

Download

E. Gil, N. Ordás, C. García-Rosales, I. Iturriza, "ODS ferritic steels produced by an alternative route (STARS): microstructural characterisation after atomisation, HIPping and heat treatments", Power Metallurgy, vol. 59, no. 5, pp. 359-369, 2016.

Publication type: Scientific Journal.

Research fields: Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

M. Santiago-Behobide, I. Andreu, M.R. Elizalde, "Desarrollo de una plataforma para el estudio de la interacción célula-matriz extracelular en 3D", XXXIV Congreso Anual de la Sociedad Españoña de Ingeniería Biomédica CASEIB2016, CASEIB2016 Libro de Actas, pp. 168-170 (ISBN: 978-84-9048-531-6) Valencia, 23-25 Noviembre, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

H. Solar, A. Beriain, A. Jiménez-Irastorza, U. Alvarado, R. Berenguer, M. Ortiz de Landaluce, M. Cojocariu, C.Martínez, "A CMOS Sensor Signal Conditioner for an Automotive Pressure Sensor based on a piezo-resistive bridge transducer", 31st Conference on Design of Circuits and Integrated Systems (DCIS 2016), pp. 79-83, Granada, 23-25 November, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

O. Mitxelena-Iribarren, C. L. Hisey, Y. González-Fernández, E. Imbuluzqueta, M. Mujika, MJ. Blanco-Prieto, S. Arana, "Microfluidic platform for dynamic in vitro optimization of methotrexate-loaded lipid nanoparticle delivery for personalized osteosarcoma treatment", CASEIB 2016, Madrid, 23-25 noviembre, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

 

Cortés, I. Vélez, A. Irizar, "High Level Synthesis using Vivado HLS for Zynq SoC: Image Processing Case Studies", XXXI Conference on Design of Circuits and Integrated Systems (DCIS), Granada, España, 22-25 Noviembre, 2016. IEEE, pp. 183-188, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

Fernández-Arévalo, T.; Grau, P.; Jeppsson, U.; Mauricio-Iglesias, M.; Vrecko, D.; Flores-Alsina, X.; Ayesa, E., "Model-based comparative assessment of innovative processes", State of the art. Innovative Wastewater Treatment and Resource Recovery Technologies. Barcelona, Spain, November 18, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Garcia-Aguirre Jon, Aymerich Enrique, Esteban-Gutiérrez Myriam, "Valoración del potencial acidogénico de diferentes residuos agroindustriales y urbanos", V Jornadas de la REC (presentación oral), Sevilla, 16-18 noviembre, 2016.

Publication type: Conference Proceedings.

Research fields: Treatment and Management of Industrial Water Systems, Treatment and Management of Sludge and Solid Wastes

Rodrigo Gonzalez, Gorka de Miguel, Iñigo Adin, Peter Lubrani, Jaizki Mendizabal, "EGNOS positioning in rail domain (ERSAT EAV)", International Navigation Conference, 8-10 November, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Leonardo Valdivia, Gonzalo Solas, Javier Añorga, Saioa Arrizabalaga, Iñigo Adin, Jaizki Mendizabal, "SDK definition for safety functions for UART, CAN and TCP/IP communications", Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 9669, pp. 74-85, 2016, Communication Technologies for Vehicles - 10th International Workshop Nets4Cars/ Nets4Trains/ Nets4Aircraft 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Aymerich Enrique, García-Aguirre Jon, Esteban-Gutierrez Myriam, "Nuevas vías para la valorización de residuos orgánicos y aguas residuales: obtención de biocompuestos", Oral presentation in Seminario final de la red Novedar “Tecnologías innovadoras para el tratamiento de aguas residuales, lodos de depuradora y residuos”, Jardín Botánico de Madrid, 3 November, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Treatment and Management of Industrial Water Systems, Treatment and Management of Sludge and Solid Wastes

Ayesa, E.; Fernández-Arévalo, T.; Lizarralde, I.; Grau, P., "Utilidad real de los simuladores dinámicos para optimizar la explotación de las EDAR urbanas", Tecnologías Innovadoras para el tratamiento de Aguas Residuales, Lodos de Depuradora y Residuos, Madrid, November 3, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Gorka Larzabal, Nerea Isasti, Jose M. Rodriguez-Ibabe, Isabel Gutiérrez, Pello Uranga, "Effect of the Time between Last Deformation Pass and Accelerated Cooling on the Mechanical Properties in Nb and Nb-Mo Microalloyed Steels", Key Engineering Materials, vol. 716, pp. 281-290, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Martínez-Calderon M., Manso-Silván M., Rodríguez A., Gómez-Aranzadi M., García-Ruiz J.P., Olaizola S.M., Martín-Palma R.J., "Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration", Scientific Reports, vol. 6, no. art. 36296, November 2, 2016.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

Fernando J. de Miguel, María J. Pajares, Elena Martínez-Terroba, Daniel Ajona, Xabier Morales, Ravi D. Sharma, Francisco J. Pardo, Ana Rouzaut, Angel Rubio, Luis M. Montuenga, Ruben Pio, "A large-scale analysis of alternative splicing reveals a key role of QKI in lung cancer", Molecular Oncology, vol. 10, no. 9, pp. 1437-1449, November, 2016.

Publication type: Scientific Journals.

Research fields: Biomedical Engineering, Bioinformatics

Download

Borja Prieto, Miguel Martınez-Iturralde, Ibon Elosegui, Gurutz Artetxe, "A Simple Model for Fault Analysis of Multiphase PMSM Drives", ESARS-ITEC Conference 2016, Toulouse, November, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Industrial and Power Systems

Cardier, M., Manrique, R., Huarte, A., Valencia, M.L., Borro, D., Calavia, D., Manrique, M., "Telemedicina: estado actual y perspectivas futuras en Audiología y Otología", Revista Médica Clínica Las Condes, vol. 27, no. 6, pp. 840-847, November, 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

Download

F. Castro, A. Veiga, S. Sainz, "Low pressure carburizing for steel components subjected to wear: a comparison against plasma nitriding", WorldPM2016, 9-13 October, Hamburg, Germany, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Sainz, C. Bilbao, A. Veiga, F. Castro, "Enhanced control of dimensional change and mechanical properties of Fe-Cu-C PM steels under optimized sintering cycle", WorldPM2016, 9-13 October, Hamburg, Germany, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, A. Veiga, E. Martínez, R. Niñerola, S. Sainz, "Selective laser melting of steel-based metal matrix composites with ceramic reinforcement", WorldPM2016, 9-13 October, Hamburg, Germany, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, I. Bailon-Poujol, V. Paserin, S. Sainz, A. Veiga, "Dilatometric analysis of pre-alloyed high hardenability PM steels containing elemental Cu additions", WorldPM2016, 9-13 October, Hamburg, Germany, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Lorena Sanz, Beatriz Pereda, Beatriz López, "Effect of coiling temperature on the strengthening mechanisms of low carbon steels microalloyed with Nb", Proceedings of the 5th International Conference on Thermomechanical Processing (TMP 2016), Milan, Italy, 26-28 October, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

L. Garcia-Sesma, B. Pereda, B. Lopez, J.M. Rodriguez-Ibabe, M. Rebellato, "Validation of Current Recrystallization Models for High Nb Microalloyed Steels", Proceedings of the 5th International Conference on Thermomechanical Processing (TMP 2016), Milan, Italy, 26-28 October, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Imanol Tubía, Maite Mujika, Miguel Valencia, Julio Artieda, Sergio Arana, "Soft polymer sensor for recording surface cortical activity in freely moving rodents", Sensors and Actuators A: Physical, vol. 251, pp. 241-247, 1 November, 2016.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

G. Larzabal, L. Garcia-Sesma, B. Pereda, P. Uranga, M. Rebellato, B. López, J.M. Rodriguez-Ibabe, "Validation of an Indirect Technique to Quantify the Amount of Niobium in Solution Prior to Hot Rolling", Procs. Materials Science and Technology 2016 (MS&T16) Conference, Salt Lake City, Utah, USA, pp. 509-516, October 23-27, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, N. Isasti, B. Pereda, J.M. Rodriguez-Ibabe, P. Uranga, "Precipitation Strengthening by Induction Treatment in High Strength Low Carbon Microalloyed Hot Rolled Plates", Procs. Materials Science and Technology 2016 (MS&T16) Conference, Salt Lake City, Utah, USA, pp. 499-507, October 23-27, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Fernández-Arévalo, T.; Lizarralde, I.; Grau, P.; Ayesa, E., "Modelización de los flujos de masa y energía en las EDAR", Procesos Avanzados para Tratamiento y Postratamiento de Aguas Residuales, Santander, 20-21 Octubre, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Jon Pérez-Arbulu, Nerea Burgos, José Manuel Martín, Ibon Elosegui, Miguel Martínez-Iturralde, Gaizka Almandoz, Ana Escalada, "Optimisation of a Compression Moulding Process for Isotropic Bonded NdFeB Magnets Starting from Gas Atomised Powders", FORMForum 2016, Bruselas, 19 October, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Materials, Consolidation of Metallic and Ceramic Powders, Industrial and Power Systems

Nerea Gil-González, T. Akyazi, A. Zuzuarregui, E. Castaño, F. Benito-Lopez, M.C. Morant-Miñana, "Characterization of Stimuli-responsive Ionogels by EIS", IBERNAM – CMC2. Toulouse (Francia), 13-14 de octubre, 2016.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Cortes, M. Aristizabal, M.H. Loretto, M.M. Attallah, I. Iturriza, "Effect of HIP temperature and post-HIP heat treatments on coincidence site lattices and twin boundaries in IN718", World Congress PM 2016, Hamburg, Germany, 9-13 October, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

O. Mitxelena-Iribarren, C. L. Hisey, Y. González-Fernández, E. Imbuluzqueta, M. Mujika, MJ. Blanco-Prieto, S. Arana, "Dynamic analysis of in vitro cytotoxicity of methotrexate-loaded lipid nanoparticles for osteosarcoma therapy", MicroTAS The 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Dublin, 9-13 October, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Jose M. Sánchez, Belen Lopez Ezquerra, Nieves Rodríguez, Roberto Martínez, Federico Ibarreta, "Damage Induced By Thermal Shock in Hardmetals and Cements", WorldPM2016, Hamburg, Germany, 9-13 October 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Nerea Burgos, Charlotte Mayer, José Manuel Martín (ponente), Peter Vikner, Francisco Castro, "Manufacturing of a magnetocaloric component by uniaxial pressing and sintering of La-Fe-Co-Si alloy powders produced by gas atomization", Powder Metallurgy World Congress & Exhibition PM2016, Hamburgo, Alemania, 9-13 October, 2016.

Publication type: Conference Proceedings.

Research fields: Thermomechanical Treatments

Beatriz Pereda, Pello Uranga, Beatriz López, Jose Rodriguez-Ibabe, Marcelo Rebellato, "Process Optimization through Microstructural Evolution Modelling in Hot Strip Rolling of Nb Microalloyed Steels", 9th Conference Steel Strip 2016, pp. 39-48, Mikulov, Republica Checa, 4-6 October, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

E. Pérez-Lorenzo, I. Tubía, J. Paredes, S. Arana, "A microfluidic platform for Brettanomyces detection based on impedance spectroscopy analysis of immunological reactions", MicroTAS The 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Dublin (Ireland), 9-13 October, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Colin L. Hisey, Miguel Martinez-Calderon, Oihane Mitxelena-Iribarren, S.M. Olaizola, Maite Mujika, Sergio Arana, Derek J. Hansford, "A Microfluidic Device for Controlled Cell Placement and 1D Migration on Biomimetic Structures", 2016 BMES Annual Meeting, Minneapolis, 5–8 October, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS, Optoelectronic Microsystems

C. Luno-Bilbao, N. Gonzalez-Polvorosa, I. Iturriza, "Master alloy additions together with heat tratments in the improvement of the mechanical properties of sintered prealloyed bonds for diamond impregnated tools", World Congress on Powder Metallurgy- Hamburgo, Octubre, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Garcia-Aguirre Jon, Esteban-Gutierrez Myriam, Tejido-Nuñez Yaiza, García-Heras Jaime Luis, Aymerich Enrique, "SARASWATI, supporting consolidation, replication and up-scaling of sustainable wastewater treatment and reuse technologies for India", Proceedings of “I Foro de ingeniería y desarrollo sostenible”, Granada, 28-29 September, 2016.

Publication type: tipo_de_publicación.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment, Treatment and Management of Sludge and Solid Wastes

I. Adin, J. Mendizabal, G. de Miguel, J. Goya, L. Zamora, S. Arrizabalaga, "Complementary positioning system in GNSS-denied areas", Transportation Research Procedia, vol. 14, pp. 4562-4571, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Embedded Systems and Networks, Integrated Circuits Design & Antennas

Download

Gonzalo Solas, Jaizki Mendizabal, Leornardo Valdivia, Javier Añorga, Iñigo Adin, Adam Podhorski, Stanislas Pinte, Luis Gerardo Marcos, Jesús Mª González, Francisco Cosín, "Development of an advanced laboratory for ETCS applications", Transportation Research Procedia, vol. 14, pp. 1894-1093, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Dalel Daâssi, Sahar Sellami, Fakher Frikha, Susana Rodriguez-Couto, Moncef Nasri, Tahar Mechichi, "Assessment of Coriolopsis gallica-treated olive mill wastewater phytotoxicity on tomamo plants", Environmental Science and Pollution Research International, vol. 23, no. 15, pp. 15370-80, August 2016.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Shilpi Agarwal, Inderjeet Tyagi, Vinod Kumar Gupta, Mohammad Hadi Dehghani, Amin Bagheri, Kaan Yetilmezsoy, Abdeltif Amrane, Behzad Heibati, Susana Rodriguez-Couto, "Degradation of azinphos-methyl and chlorpyrifos from aqueous solutions by ultrasound treatment", Journal of Molecular Liquids, vol. 221, pp. 1237-1242, September 2016.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Vance Kendrick, Brian Frye, Alison Sutcliffe, Jose M. Rodriguez-Ibabe, Douglas G. Stalheim, "Evaluation of Toughness Characteristics of API Grade Pipeline Steel Produced on Compact Strip Production (CSP) Line", Proceedings of the 2016 11th International Pipeline Conference, IPC2016, Calgary, Alberta, Canada, September 26-30, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Jesús Gutiérrez-Gutiérrez, Marta Zárraga-Rodríguez, "Singular value decomposition for bidiagonal filter matrices", Applied Mathematics and Computation, vol. 289, pp. 214-219, oct. 20, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

M.H. Bocanegra-Bernal, C. Dominguez-Rios, J. Echeberria, A. Reyes-Rojas, A. Garcia-Reyes, A. Aguilar-Elguezabal, "Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics", Ceramics International, vol. 42, no. 14, pp. 16417-16423, 1 November, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Marco Rigamonti, Piero Baraldi, Enrico Zio, Allegra Alessi, Daniel Astigarraga, Ainhoa Galarza, "Identification of the degradation state for condition-based maintenance of insulated gate bipolar transistors: A self-organizing map approach", Microelectronics Reliability, vol. 60, pp. 48-61, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

R. Neu, J. Riesch, J.W. Coenen, J. Brinkmann, A. Calvo, S. Elgeti, C. García-Rosales, H. Greuner, T. Hoeschen, G. Holzner, F. Klein, F. Koch, Ch. Linsmeier, A Litnovsky, T. Wegener, S. Wurster , J.-H. You, "Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants", Fusion Engineering and Design, vol. 109-111, pp. 1046-1052, 1 November, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

J. Gil-Sevillano, J. Aldazabal, I. Aldazabal, A. Luque, "Elasto-plastic Behaviour of Nanostructured bcc Iron <011> Columnar Strcutures", 8th International Conference on Multiscale Materials Modeling, Conferencia invitada, Dijón (France), 9-14 September, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

Carmila Shirota, Jelka Jansa, Javier Diaz, Sivakumar Balasubramanian, Stefano Mazzoleni, N. Alberto Borghese, Alejando Melendez-Calderon, "On the assessment of coordination between upper extremities: towards a common language between rehabilitation engineers, clinicians and neuroscientists", Journal of NeuroEngineering and Rehabilitation, vol. 13, no. 80, september 8, 2016.

Publication type: Scientific Journals.

Research fields: Biomedical Engineering, Biorobotics and Surgical Simulation

Download

Aida Calvo, Carmen García-Rosales, Nerea Ordás, Iñigo Iturriza, Karsten Schlueter, Freimut Koch, Gerald Pintsuk, Elena Tejado, José Ygnacio Pastor, "Self-passivating W-Cr-Y alloys: characterization and testing", 29th Symposium on Fusion Technology (SOFT 2016), Prague, Czech Republic, 5th-9th September, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

J.W. Coenen, Y. Mao, J. Almanstötter, A. Calvo, S. Sistla, H. Gietl, B. Jasper, J. Riesch, M. Rieth, G. Pintsuk, F. Klein, A. Litnovsky, A.V. Mueller, T. Wegener, J.-H. You, ch. Broeckmann, C. Garcia-Rosales, Ch. Linsmeier, "Advanced materials for a damage resilient divertor concept for DEMO: Powder-matellurgical tungsten-fibre reinforced tungsten", 29th Symposium on Fusion Technology (SOFT 2016), Prague, Czech Republic, 5th-9th September, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

C. Soto, C. García-Rosales, J. Echeberria, J. M. Martínez Esnaola, THernández M. Malo, E. Platacis, F. Muktepavelac, "SiC-based sandwich material for Flow Channel Inserts in DCLL blankets: manufacturing, characterization, corrosion tests", The Symposium on Fusion Technology (SOFT 2016), Praga, República Checa, 5-9 Spetiembre, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

S. Cicero, T. García, J.A. Álvarez, A. Bannister, A. Klimpel, A. Martín-Meizoso, J. Aldazabal, "Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges", Procedia Engineering, vol. 160, pp. 246-253, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

S. Cicero, T. García, J.A. Álvarez, A. Bannister, A. Klimpel, A. Martín-Meizoso, J. Aldazabal, "Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges", XVIII International Colloquium on Mechanical Fatigue of Metals (ICMFM XVIII), Gijón, September 5-7, 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

Download

 

N. Gil-González, T, Akyazi, A. Zuzuarregi, E. Castano, F. Benito López, M.C. Morant-Miñana, "Understanding the behavior of stimuli-response ionogels for microfluidic applications", EUROSENSORS 2016, poster, Budapest (Hungary), 4-7 September, 2016.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

D. Andrés, T. García, S. Cicero, R. Lacalle, J.A. Álvarez, A. Martín-Meizoso, J. Aldazabal, A. Bannister, A. Klimpel, "Characterization of heat affected zones produced by thermal cutting processes by means of Small Punch tests", Materials Characterization, vol. 119, pp. 55-64, September, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Federico Martin Ibanez, Jose Martin Echeverria, Javier Vadillo, Luis Fontan, "State-Plane Analysis of Anomalous Step-Up Behavior in Series-Resonant Converters", IEEE Journal of Emerging and selected Topics in Power Electronics, vol. 4, no. 3, pp 1026-1035, september, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

E. Gil, D. Pazos, I. Iturriza, C. García-Rosales, V. de Castro, T. Leguey, J. Hoffmann, A. Anspoks, J. purans, M. Rieth, N. Ordás, "ODS ferritic steels obtained by STARS: an innovative processing route without mechanical alloying", 28th Symposium on Fusion Technology (SOFT). Praga, República Checa, September, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

N. Ordás, F. Samaniego, I. Iturriza, T. Cicero, "Mechanical and microstructural characterization of HIP joints of a simplified prototype of the ITER NHF First Wall Panel", 28th Symposium on Fusion Technology (SOFT), poster. Praga, República Checa, September, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

Daniel Astigarraga, Federico Martin Ibanez, Ainhoa Galarza, Jose Martin Echeverria, Inigo Unanue, Piero Baraldi, Enrico Zio, "Analysis of the results of accelerated aging tests in Insulated Gate Bipolar Transistors", IEEE Transactions on Power Electronics, vol. 31, no. 11, pp. 7953-7962, november 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Bilbao, J., Crespo, P.M, Armendariz, I, Medard, M., "Network Coding in the Link Layer for Reliable Narrowband Powerline Communications", IEEE Journal on Selected Areas in Communications, vol. 34, no. 7, pp. 1965-1977, July 2016

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

X. Justo, I. Díaz, J.J. Gil, G. Gastaminza, "Prick test: evolution towards automated reading", Allergy, vol. 71, no. 8, pp. 1095-1102, August, 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

Download

A. Iza-Mendia, I. Gutierrez, R. Rodríguez, A. López, "Recrystallization of Cold Pilgered Heat Resistant Austenitic Stainless Steel Seamless Tubes Under Anisothermal Annealing Conditions", Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), Pittsburgh, PA USA, July 17–21, pp. 203–208, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Download

Luis Tobalina, Jon Pey, Francisco J. Planes, "Direct calculation of minimal cut sets involving a specific reaction knock-out", Bioinformatics, vol. 32, no. 13, pp. 2001-2007, July 1, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Download

J. Ollo J. Echeberria, "MIKROIRAGAZKETAKO SISTEMA ZERAMIKOEN GARAPENA UR TRATAMENDURAKO KOSTU BAXUKO PROZESAKETAREN BIDEZ", Conferencia en Materialen Zientzia eta Teknologia III, Markina-Xemein, 5-6 julio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Iza-Mendia, D. Jorge-Badiola, I. Gutiérrez, "Belaunaldi berriko erresistentzia altuko altzairuen propietate mekanikoen modelizazioa", Materialen Zientzia eta Teknologia III. Kongresua, Markina-Xemein, Uztailak 5-6, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

M.C. Taboada, A. Iza-Mendia, D. Jorge-Badiola, I. Gutiérrez, "Erresistentzia altuko altzairuen mikroegituraren karakterizazioaren konplexutasuna: teknika desberdinen arteko alderaketa", Materialen Zientzia eta Teknologia III. Kongresua, Markina-Xemein, Uztailak 5-6, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, P. Uranga, B. Lopez, J.M. Rodriguez-Ibabe, "Soluzio solidoan dagoen Niobioa kalkulatzeko zeharkako metodologia berria", Materialen Zientzia eta Teknologia III. Kongresua, Uztailak 5-6, 2016, Markina-Xemein.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, P. Uranga, "Azken iraganaldiaren eta hozketa azkarraren arteko denboraren eragina propietate mekanikoetan Nb eta Nb-Mo altzairu mikroaleatuetan", Materialen Zientzia eta Teknologia III. Kongresua, Uztailak 5-6, 2016, Markina-Xemein.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

L. Garcia-Sesma, B. Pereda, B. Lopez, "Hauspeakinen Sekuentziaren Kontrola, Erresistentzia Altuko Nb-Ti Altzairu Mikroaleatuetan", Materialen Zientzia eta Teknologia III. Kongresua, Uztailak 5-6, 2016, Markina-Xemein.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

M. Pasupathy, J.M. Martín, A. Rivas, I Iturriza, F. Castro, "Effect of the solidification time on the median particle size of powders produced by water atomisation", Powder Metallurgy, vol. 59, no. 2, pp. 128-141, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

T. Fernández-Arévalo, I. Lizarralde, M. Maiza, P. Grau and E. Ayesa, "Global optimization and resource recovery analysis in WWTPs using PWM simulations: Full-scale experiences", 3rd Eco-technologies for Wastewater Treatment: Technical, Environmental & Economic Challenges. EcoSTP2016. Cambridge, England, 27-30 June, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Fernando Accini, Iñaki Díaz, Jorge Juan Gil, "Bone Recognition during the Drilling Process", 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), pp. 305-310, Utown, Singapore, June 26-29, 2016.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

Maykel Alonso-Arce, Javier Añorga, Saioa Arrizabalaga, Paul Bustamante, "A Wireless Sensor Network PBL Lab for the Master in Telecommunications Engineering", Technologies Applied to Electronics Teaching (TAEE), Sevilla, 22-24 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Damian Caballero, Ibon Elosegui, M. Martinez-Iturralde, "Analysis and comparison of algebraic approaches for highly saturated Surface PMSM", International Symposium on Power Electronics, Electrical Drives, Automation and Motion, pp. 197-204, 22-24 June, 2016.

Publication type: Conference Proceedings.

Download

Laura Llanos, Beatriz Pereda, Beatriz López, Jose Maria Rodriguez-Ibabe, "Modelling of Static Recrystallization Behavior of High Manganese Austenitic Steels with Different Alloying Contents", ISIJ International, vol. 56, no. 6, pp. 1038–1047, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Juan P. Romero, Ander Muniategui, Fernando J. De Miguel, Ander Aramburu, Luis Montuenga, Ruben Pío, Angel Rubio, "EventPointer: An effective identification of alternative splicing events using junction arrays", BMC Genomics, vol. 17, no. 467, June 17, 2016.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

Shandra Sainz, Angela Veiga, Francisco R. Castro, "Sintered Mn-containing steels for high-performance applications", International Journal of Powder Metallurgy, vol. 52, no. 2, pp. 47-55, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M.R. Elizalde, N. Ordás, J.M. Martínez-Esnaola, "Modelling thermal properties; microstructure effects", SUMMEREV 16, Hilti AG, Liechtenstein, Conferencia invitada, 16-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

Frenk VAN DEN BERG, Piet KOK, Haibing YANG, Maxim AARNTS, Jan-Jaap VINK, Willem BEUGELING, Philip MEILLAND, Thomas KEBE, Mathias STOLZENBERG, David KRIX, Anthony PEYTON, Wenqian ZHU, Ane MARTINEZ-DE-GUERENU, Isabel GUTIERREZ, Denis JORGE-BADIOLA, Kizkitza GURRUCHAGA, Peter LUNDIN, Arno VOLKER, Mariana MOTA, Johan MONSTER, Håkan WIRDELIUS, Claudio MOCCI, Gianluca NASTASI, Valentina COLLA, Claire DAVIS, Lei ZHOU, René SCHMIDT, Stéphane LABBÉ, Christophe REBOUD, Anastassios SKARLATOS, Tomas SVATON, Vincent LECONTE, Patrick LOMBARD, "In-line Characterisation of Microstructure and Mechanical Properties in the Manufacturing of Steel Strip for the Purpose of Product Uniformity Control", Proc. 19th World Conference on Non-Destructive Testing, Munich (Germany), Mo_1_G_1, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

L. Zhou, C. Davis, P. Kok, F. van den Berg, S. Labbé, A. Martinez-de-Guerenu, D. Jorge-Badiola, I. Gutierrez, "Magnetic NDT for Steel Microstructure Characterisation – Modelling the Effect of Ferrite Grain Size on Magnetic Properties", Proc. 19th World Conf. on NDT, Munich (Germany), Tu_2_H_2, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Materials, Instrumentation, Sensor and Non Destructive Testing Technologies, Thermomechanical Treatments

Download

A. Volker, M. De Soares Silva e Melo Mota, H. Wirdelius, P. Lundin, D. Krix, P. Kok, A. Martinez-de-Guerenu, I. Gutierrez, "Ultrasonic Assessment of Metal Microstructures, Modelling and Validation", Proc. 19th World Conf. on NDT, Munich (Germany), Th_2_I_1, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Materials, Instrumentation, Sensor and Non Destructive Testing Technologies, Thermomechanical Treatments

Download

A. Martinez-de-Guerenu, M.X. Zambrano, F. Arizti, "Magnetic characterization of wear due to fatigue and inspection of flaws in small diameter wire ropes", Proc. 19th World Conference on Non-Destructive Testing (WCNDT 2016), Munich, Germany, Tu_1_F_2, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

K. Gurruchaga, A. Martinez-de-Guerenu, A. Lasaosa, F. Arizti, "Quality control of the induction hardened layer and the grinding process in aerospace ball screws via magnetic Barkhausen noise analysis", Proc. 19th World Conference on Non-Destructive Testing (WCNDT 2016) Munich, Germany, P34, 13-17, June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

A. Peyton, N. Karimian, J. Wilson, M. Stolzenberg, R. Schmidt, C. Davis, L. Zhou, P. Lombard, P. Meilland, A. Martinez-De-Guerenu, K. Gurruchaga, "The Application of Electromagnetic Measurements for the Assessment of Skin Passed Steel Samples", Proc. 19th World Conference on Non-Destructive Testing (WCNDT 2016), Munich, Germany, Th_2_I_4, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

A. Skarlatos, C. Reboud, T. Svaton, A. Martinez-de-Guerenu, T. Kebe, F. van den Berg, "Modelling the IMPOC Response for Different Steel Strips", Proc. 19th World Conference on Non-Destructive Testing (WCNDT 2016), Munich, Germany, We_2_H_3, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

P. Meilland, P. Lombard, C. Reboud, A. Skarlatos, T. Svaton, A. Martinez-de-Guerenu, S. Labbé, M. Stolzenberg, "B-H Curves Approximations for Modelling Outputs of Non-Destructive Electromagnetic Instruments", 19th World Conference on Non-Destructive Testing (WCNDT 2016), Munich, Germany, P91, 13-17 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

I. Lizarralde, T. Fernández-Arévalo, E. Ayesa, P. Grau, "New advanced model-based tool for the integrated assessment of nutrient treatment solutions in WRRF", 13th IWA Leading Edge Conference on Water and Wastewater Technologies. Evaluating Impacts of Innovation (LET2016). Jerez de la Frontera, Spain, 13-16 June, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

P. Pérez-Calleja, A. L. Esteban-García, I. Tejero, C. Gabaldón, L. Larrea, "Guidelines for the Energy Efficient Operation of the Hybrid Membrane Aerated Biofilm Process for Nitrogen Removal", 13th IWA Leading Edge Conference on Water and Wastewater Technologies. Evaluating Impacts of Innovation. Jerez de la Frontera, Spain, 13-16 June 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Isabel Gutiérrez, "Innovación en acero: evolución y nuevos retos", Jornada “Los aceros del Futuro”, PLATEA, Bilbao, 13 Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

J. Aldazabal, I. Aldazabal, "Computer Modelling of the Influence of Precipitates in Diffusion", XIV Congreso Nacional de Materiales, Comunicación oral, Gijón, 8-10 Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

C. Soto, J. Echeberria, T Hernández , C. García-Rosales, "Desarrollo y fabricación de SiC poroso para su aplicación en blankets de futuros reactores de fusión nuclear", Conferencia en XIV Congreso Nacional de Materiales, Gijon, 8-10 Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

A. Iza-Mendia, D. Jorge-Badiola, I. Gutiérrez, "Extensión de un modelo mecánico basado en la microestructura en aceros microaleados: contribución de la precipitación", XIV Congreso Nacional de Materiales, Gijón, 8-10 Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, I. Gutiérrez, P. Uranga, "Quantification of the strengthening mechanisms in a low carbon Ti-Mo microalloyed steel", XIV Congreso Nacional de Materiales, Gijón, 8-10 Junio 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Jon Arruabarrena, B. López, J.M. Rodriguez-Ibabe, "Influencia de los parámetros que controlan la transformación inducida por deformación (DIT), en el proceso de esferoidización de la cementita", XIV Congreso Nacional de Materiales, Gijón, 8-10 Junio 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

L. Sanz, B. Pereda, B. López, "Reconstrucción cristalográfica de la austenita a partir de mapas de orientación de martensita aplicada a una aleación modelo Fe-30Ni", XIV Congreso Nacional de Materiales, Gijón, 8-10 Junio 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Olatz Iparraguirre Gil, Alfonso Brazalez Guerra, "Communication Technologies for Vehicles: eCall", Communication Technologies for Vehicles. 10th International Workshop Nets4Cars/Nets4Trains/Nets4Aircraf 2016, Proceedings. Lecture Notes in Computer Science LNCS vol. 9669, Springer 2016. San Sebastian, Spain, 6-7 June, pp. 103-110, 2016.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, ITS and Simulators

Download

 

Jaizki Mendizabal, Gonzalo Solas, Leonardo J. Valdivia, Gorka de Miguel, Julen Uranga, Iñigo Adin, "ETCS’s Eurobalise-BTM and Euroloop-LTM Airgap Noise and Interferences Review", 10th International Workshop, Nets4Cars/Nets4Trains/Nets4Aircraft 2016, San Sebastián, Spain, June 6-7, 2016 Proceedings: Communication Technologies for Vehicles.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Gonzalo Solas, Iñigo Adin, Leonardo J. Valdivia, S. Arrizabalaga, Jaizki Mendizabal, "Wireless Communication Emulator Device and Methodology for the ETCS BTM Subsystem", 10th International Workshop, Nets4Cars/Nets4Trains/Nets4Aircraft 2016, San Sebastián, Spain, June 6-7, 2016 Proceedings: Communication Technologies for Vehicles.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Jaizki Mendizabal · Marion Berbineau, Alexey Vinel, Stephan Pf letschinger, Hervé Bonneville, Alain Pirovano, Simon Plass · Riccardo Scopigno, Hasnaa Aniss, "Communication Technologies for Vehicles", Editors of book Proceedings. 10th International Workshop, Nets4Cars/Nets4Trains/Nets4Aircraft 2016, San Sebastián, Spain, June 6-7, 2016.

Publication type: Books.

Research fields: Electronics & Communications, Embedded Systems and Networks

L. Garcia-Sesma, G. Larzabal, B. Pereda, P. Uranga, B. Lopez, J. M. Rodriguez-Ibabe, "Issues Concerning the Prediction of Nb in Solution Available to Precipitate during Thermomechanical Processes in Nb Based Steels", Procs. 10th International Rolling Conference and the 7th European Rolling Conference, The Austrian Society for Metallurgy and Materials, Graz (Austria), 6-9 June 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

J. Garcia-Aguirre, E. Aymerich, M. Esteban-Gutierrez, "Assessing the potential of industrial waste streams for volatile fatty acids (VFA) production", 1st International Conference on Bioenergy & Climate Change towards a sustainable development, Soria, 6-7 Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Treatment and Management of Industrial Water Systems, Treatment and Management of Sludge and Solid Wastes

E. Gil, I. Iturriza, C. García-Rosales, V. de Castro, T. Leguey, J. Hoffmann, M. Rieth, N. Ordás, "STARS: the development of ODS ferritic stainless steels by a new processing route without mechanical alloying", XIV Congreso Nacional de Materiales. Gijón, Junio, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Behzad Heibati, Susana Rodriguez-Couto, Okan Ozgonenel, Nurdan Gamze Turan, Annalisa Aluigi, Mohammad Ali Zazouli, Mohammad Ghanbari Ghozikali, Mahmoud Mohammadyan, Ahmad B. Albadarin, "A modeling study by artificial neural network on Ethidium Bromide adsorption optimization using natural pumice and iron-coated pumice", Desalination and Water Treatment, vol. 57, no. 29, pp. 13472-13483, June 20, 2016.

Publication type: Scientific Journals.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

A. Litnovsky, T. Wegener, F. Klein, Ch. Linsmeier, M. Rasinski, A. Kreter, B. Unterberg, M. Vogel, S. Kraus, U. Breuer, C. Garcia-Rosales, A. Calvo, N. Ordas, "Smart alloys for a future fusion power plant: first studies under stationary plasma load and in accidental conditions", Congreso: 22nd International Conference on Plasma Surface Interactions in Controlled Fusion Devices (PSI 20160), Rome, Italy, May 30 to June 3, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M.R. Elizalde, J. Alkorta, I. Ocaña, J.M. Martínez-Esnaola, D. Pantuso, H. Li, "Assessment of elastic properties of very thin films through wrinkles induced by residual stresses", 14th International Conference Reliability and Stress-Related Phenomena in Nanoelectronics – Experiment and Simulation, Conferencia invitada, Dresden (Germany), 30 May-1 June, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

P. Esteban, A. López, I. Gutierrez, A. Iza-Mendia, "Relationship between microstructure and SSR tested samples fractography in high strength pipes of grade N08825", NACE Milano Italia Section - Conference & Expo 2016, Genoa, Italy, 29-31 May, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

L. Llanos, B. Pereda, B. López, J.M. Rodríguez-Ibabe, "Modelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying Contents", Procs. Thermec´2016, Graz, Austria, May 29-June 3, 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M.C. Taboada, I. Gutiérrez, D. Jorge-Badiola, S.M.C. Van Bohemen, F. Hisker, G. Paul, "Influence of the processing variables on the microstructure evolution of a bainitic carbide-free steel", Procs. Thermec´2016, Graz, Austria, May 29-June 3, 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

L. Sanz, B. Pereda, B. López, "Analysis of the Static Recrystallization Behaviour of Nb-Ti Microalloyed Steels Including Low Strain Levels", Procs. Thermec´2016, Graz, Austria, May 29-June 3, 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

B. López, J.M. Rodriguez-Ibabe, "Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels", Procs. Thermec´2016, Graz, Austria, May 29-June 3, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

M. Martinez-Calderon, A. Rodriguez, A. Dias, M. Gomez-Aranzadi, S.M. Olaizola, "Femtosecond laser fabrication of highly hydrophobic stainless steel surface with hierarchical structures fabricated by combining ordered microstructures and LIPSS", Applied Surface Science, vol. 374, pp. 81-89, June 30, 2016.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

I. Tubía, S. Arana, E. Pérez-Lorenzo, C. Abadín, M. Zumárraga, I. Oyanguren, F. Barbero, J. Paredes, "Impedance Spectroscopy Analysis for Spoilage Yeast Detection using Interdigitated Microelectrodes Biosensors", 26th Anniversary World Congress on Biosensors, Gothenburg, 25-27 May, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biorobotics and Surgical Simulation, Micro and Nano Systems

O. Mitxelena-Iribarren, C. L. Hisey, Y. González-Fernández, E. Imbuluzqueta, M. Mujika, MJ. Blanco-Prieto, S. Arana, "Microfluidic platform for dynamic in vitro cytotoxicity analysis of free methotrexate and methotrexate-lipid nanoparticles to improve osteosarcoma therapies", 26th Anniversary World Congress on Biosensors, Gothenburg, 25-27 May, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Olatz Iparraguirre Gil, Luis Matey Muñoz, Alfonso Brazalez Guerra, Irantzu Bores Pascual, "TrafikData. Los vehículos como sensores de la carretera", XVI Congreso Español sobre Sistemas Inteligentes de Transporte. Madrid, 17-19 mayo, 2016.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, ITS and Simulators

P. Uranga, J.M. Rodriguez-Ibabe, D.G. Stalheim, R. Barbosa, M. Rebellato, "Application of Practical Modeling of Microalloyed Steels for Improved Metallurgy, Productivity and Cost Reduction in Hot Strip Mill Applications", Proceedings of AISTech 2016 Conference, Pittsburgh, PA. Iron and Steel Technology Conference Proceedings, vol. 2, pp. 1769-1778, 16-19 May, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Luis Tobalina, Jon Pey, Alberto Rezola, Francisco J. Planes, "Assessment of FBA Based Gene Essentiality Analysis in Cancer with a Fast Context-Specific Network Reconstruction Method", PLOS ONE, vol. 11, no. 5, no. artículo: e0154583, May 4, 2016.

Publication type: Scientific Journals.

Research fields: Electronics & Communications, Bioinformatics

Download

S. Cicero, T. García, J.A. Álvarez, A. Martín-Meizoso, J. Aldazabal. A. Bannister, A. Klimpel, "Definition and validation of Eurocode 3 FAT classes for structural steels containing oxy-fuel, plasma and laser cut holes", International Journal of Fatique, vol. 87, pp. 58-58, June, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

L. Parellada-Monreal, M. Martinez-Calderón, A. Rodriguez, M. Gomez-Aranzadi, S.M. Olaizola, I. Castro-Hurtado, I. Ayerdi, E. Castaño, G.G. Mandayo, "Semiconductor oxide surfaces modified by LIL for pollutant detection", 2016 E-MRS Spring Meeting, Lille, France, 2-6 May, 2016.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Ane Larrañaga-Otegui, Beatriz Pereda, Denis Jorge-Badiola, Isabel Gutiérrez, "Austenite static recrystallization kinetics in microalloyed B steels", Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 47, no. 6, pp. 3150-3164, June 2016.

Publication type: Scientific Journals.

Research fields: Materials, Thermomechanical Treatments

Download

Mikel Arenas, Adam Podhorski, Saioa Arrizabalaga, Jon Goya, Beatriz Sedano, Jaizki Mendizabal, "Implementation and validation of an angle of Arrival (AoA) determination system for real-time on-board train positioning", 6th Transport Research Arena (TRA), April 18-21, Varsovia (Poland), 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

I. Adin, J. Mendizabal, G. de Miguel, J. Goya, L. Zamora, S. Arrizabalaga, "Complementary positioning system in GNSS-denied areas", 6th Transport Research Arena (TRA), April 18-21, Varsovia (Poland), 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Embedded Systems and Networks, Integrated Circuits Design & Antennas

Download

Gonzalo Solas, Jaizki Mendizabal, Leornardo Valdivia, Javier Añorga, Iñigo Adin, Adam Podhorski, Stanislas Pinte, Luis Gerardo Marcos, Jesús Mª González, Francisco Cosín, "Development of an advanced laboratory for ETCS applications", 6th Transport Research Arena (TRA), April 18-21, Varsovia (Poland), 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

E. Jorge, A. Guiral, A. Alonso, "Sound transmission through panels: a comparison of different methods and development of simplified methodologies", 3rd International Conference on Railway Technology: Research, development and Maintenance, paper 316. Cagliari (Sardinia), Italy, 5-8 April 2016.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

I. Lizarralde, T. Fernández-Arévalo, S. Monge, A. Manas, E. Ayesa, P. Grau, J. Suescun, "Model based assessment of the optimum phosphorus management strategies in a full-scale WWTP", WWTmod 2016, 5th IWA/WEF, Wastewater Treatmente Modelling Seminar, Annecy, France, 2-6 April, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

T. Fernández-Arévalo, I. Lizarralde, M. Maiza, P. Grau and E. Ayesa, "Diagnosis and optimization of WWTPs using the PWM library: Full-scale experiences", WWTmod 2016, 5th IWA/WEF, Wastewater Treatmente Modelling Seminar, Annecy, France, 2-6 April, 2016.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, P. Uranga, "Importancia del tiempo entre la última pasada de deformación y el enfriamiento acelerado en el afino microestructural en aceros microaleados con Nb y NbMo", Trater Press: Revista del Tratamiento Térmico, n. 52, pp. 29-36, Abril 2016.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

A. García de la Yedra, J.L. Pedrejón, A. Martín-Meizoso, R. Rodríguez, "Thermomechanical Fatigue Tests Development and Life Prediction of a Nickel Base Superalloy", Experimental Techniques, vol. 40, no. 2, pp. 777-787, April 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

C. Capdevila, M.M. Aranda, R. Rementeria, J. Chao, E. Urones-Garrote, J. Aldazabal, M.K. Miller, "Strengthening by intermetallic nanoprecipitation in Fe-Cr-Al-Ti alloy", Acta Materialia, vol. 107, pp. 27-37, 1 April, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

M. Garrido-Baserba, R. Reif, M. Molinos-Senante, L. Larrea, A. Castillo, M. Verdaguer, M. Poch, "Application of a multi-criteria decision model to select of design choices for WWTPs", Clean Technologies and Environmental Policy, vol. 18, no. 4, pp. 1097-1109, April 1, 2016.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Download

Sheila Becerro, Jacobo Paredes, Maite Mujika, Eva Pérez-Lorenzo, Sergio Arana, "Electrochemical Real-Time Analysis of Bacterial Biofilm Adhesion and Development by Means of Thin-Film Biosensors", IEEE Sensors Journal, vol. 6, no. 7, pp. 1856-1864, April 1, 2016.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

S. Cicero, T. García, J.A. Álvarez, A. Martín-Meizoso, A. Bannister, A. Klimpel, "Definition of BS7608 fatigue classes for structural steels with thermally cut edges", Journal of Constructional Steel Research, vol. 120, pp. 221-231, April, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Federico Martin Ibanez, Jose Martin Echeverria, Daniel Astigarraga, Luis Fontan, "Multimode step-up bidirectional series resonant DC/DC converter using continuous current mode", IET Power Electronics, vol. 9, no. 4, pp. 710-718, 30 March, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

S. Cicero, T. García, J.A. Álvarez, A. Bannister, A. Klimpel, A. Martín-Meizoso, J. Aldazabal, "Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of Eurocode 3 FAT classes", Engineering Structures, vol. 111, pp. 152-161, 15 March, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Colin L. Hisey, Oihane Mitxelena-Iribarren, Miguel Martinez-Calderon, Sergio Arana, Maite Mujika, S.M. Olaizola, Derek J. Hansford, "A combined cell placement and migration assay device for cancer cell anti-migration drug screening", Lab on a Chip & Microfluidics 2016, March 15-16, Madrid, 2016.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS, Optoelectronic Microsystems

G. Artola, J. Aldazabal, "Estudio de Agrietamiento en el Ensayo SSRT de Probetas Galvanizadas", XXXIII Encuentro del Grupo Español de Fractura, comunicación oral, Proc. Anales de Mecánica de la Fractura (ISSN: 0213-3725), vol. 33, pp. 183-187, San Sebastián, 9-11 Marzo, 2016.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Luque, J. Aldazabal, I. Aldazabal, J. Gil Sevillano, "Atomistic Simulation of the Response to Axial Elengation of a <110> Columnar Nanostructure of Iron with a Nano-Sized Penny-Shaped Tranverse Crack", XXXIII Encuentro del Grupo Español de Fractura, comunicación oral, Proc. Anales de Mecánica de la Fractura (ISSN: 0213-3725), vol. 33, pp. 370-374, San Sebastián, 9-11 Marzo, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

I. Andreu, M. Flandes Iparraguirre, K. Stuckensen, J.M. Lamo de Espinosa Vazques de Sola, E. Muiños López, J. Nickel, M.R. Elizalde, F. Prósper Cardoso, J. Groll, F. Granero Moltó, "Mechanical characterization of a bone repair sustem using anisotropic and isotropic collagen sponges containing BMP2", XXXIII Encuentro del Grupo Español de Fractura, comunicación oral, Proc. Anales de Mecánica de la Fractura (ISSN: 0213-3725), vol. 33, pp. 242-246, San Sebastián, 9-11 Marzo, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

A. Bergara, J.I. Dorado, A. Martín-Meizoso, J.M. Martínez-Esnaola, "Propagación de grietas por fatiga en campos bi-variantes de tensiones: experimentos y modelización numérica", XXXIII Encuentro del Grupo Español de Fractura, comunicación oral, Proc. Anales de Mecánica de la Fractura (ISSN: 0213-3725), vol. 33, pp. 386-392, San Sebastián, 9-11 Marzo, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

J.M. Rodriguez-Ibabe, "Micromecanismos de fractura en los aceros: una herramienta para el diseño de nuevas composiciones y procesos industriales", XXXIII Encuentro del Grupo Español de Fractura. Anales de Mecánica de la Fractura, vol. 33, 9-11 marzo, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

P. Uranga, "Discussion of the effect of Nb and Mo on microstructural evolution during hot-rolling, phase transformations and mechanical properties in low carbon HSS steels", CBMM-SSAB Technical Workshop, Oulu, Finland, 9-10 March, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

Iker Zubizarreta, Alessandro Seravalli, Saioa Arrizabalaga, "Smart City Concept: What It Is and What It Should Be", Journal of Urban Planning and Development, American Society of Civil Engineers, vol. 142, no. 1, March, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Jaizki Mendizabal, Iñigo Adin, Gonzalo Solas, Leonardo Valdivia, Gorka de Miguel, "Evolution of testing: field testing, laboratory testing and virtual testing: BTM case study", 12th UIC ERTMS World Conference, 1-2 March, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

L. Vazquez, J. M. Sanchez, "Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites", Composites Part B-Engineering, vol. 90, pp. 416-423, 1 April 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Behzad Heibati, Kaan Yetilmezsoy, Mohammad Ali Zazouli, Susana Rodríguez-Couto, Inderjeet Tyagi, Shilpi Agarwal, Vinod Kumar Gutpa, "Adsorption of ethidium bromide (EtBr) from aqueous solutions by natural pumice and aluminium-coated pumice", Journal of Molecular Liquids, vol. 213, pp. 41-47, January 2016.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Hongbin Ge, Yuan Yao, Junsheng Yu, Xiaodong Chen, Daniel Valderas, "Straight-forward impedance measurement for balanced RFID tag antenna", Electronics Letters, vol. 52, no. 3, pp. 181-182, February 4, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

Jorge Aramburu, Raúl Antón, Diego Borro, Alejandro Rivas, Gorka S. Larraona, Juan C. Ramos, Ender A. Finol, "A methodology for assessing local bifurcated blood vessel shape variations", Biomedical Physics & Engineering Express, vol. 2, no. 1, 015001, February 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

Download

J. Gil-Sevillano, I. Aldazabal, A. Luque, J. Aldazabal, "Atomistic simulation of the elongation response of a <011> oriented columnar nano-grain bcc Fe polycrystalline sample", Computational Micromechanics of Materials, vol. 51, no. 2, pp. 401-413, February 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Enrique Aymerich, Ion Irizar, "Control automático de digestores anaerobios", Xavier Flotats Ripoll (ed), “De Residuo a Recurso: El camino a la Sostenibilidad. II Procesos de biotransformación de la materia orgánica. 4 Ingeniería y aspectos técnicos de la digestión anaeróbica”. Editorial Mundiprensa, 2016. ISBN: 978-84-8476-629-2, 2016.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

Marco Rigamonti, Piero Baraldi, Enrico Zio, Daniel Astigarraga, Ainhoa Galarza, "Particle Filter-Based Prognostics for an Electrolytic Capacitor Working in Variable Operating Conditions", IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 1567-1575, February 2016, ISSN 0885-8993.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

Iñaki Merideno, Javier Nieto, José Germán Giménez Ortiz, Aitor Landaberea, Jon Iartza, "Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength", Shock and Vibration, vol. 2016, ID 7846369 (14 pages), 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

Miguel Aizpun, Asier Alonso, Jordi Vinolas, "A new parameter identification methodology for the bogie rotational resistance test of a rail vehicle", Journal of Rail and Rapid Transit, vol. 230, no. 3, pp. 879–890, January 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

J. Aldazabal, I. Aldazabal, A. Luque, J. Gil-Sevillano, "Modeling the elasto-plastic behaviour of nanostructured bcc iron filaments by molecular dynamics", Multi-scale and multi-physics materials modeling for advanced industries Workshop (póster), Madrid, 26-27 Enero, 2016.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

Y. Zheng, M. Hutchinson, D. Lowe, S. Arrizabalaga, J. Goya, L. Zamora-Cadenas, J. Valera, J. Sanchez, "The Hybrid GNSS/WCT Multi-coach Multi-constellation Train Positioning and Integrity System", Proceedings of the 2016 International Technical Meeting, ION ITM 2016, Monterey, California, January 25-28, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Embedded Systems and Networks

Ane Maite Martinez, Jon Echeberria, "Towards a better understanding of the reaction between metal powders and the solid lubricant Sb2S3 in a low-metallic brake pad at high temperature", Wear, vols. 348-349, pp. 27-42, 15 February 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Solar, H., Alonso, M., Bustamante, P., Giers, C., "Design of a Wireless Power Transfer receiver with an ad-hoc coil for the Qi Standard", 2015 Conference on Design of Circuits and Integrated Systems, DCIS 2015, Estoril, Portugal, 25-27 November 2015, article number 7388586, 20 January, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Dalel Daâssi, Hela Zouari-Mechichi, Fakher Frikha, Susana Rodríguez-Couto, Moncef Nasri , Tahar Mechichi, "Sawdust waste as a low-cost support-substrate for laccases production and adsorbent for azo dyes decolorization", Journal of Environmental Health Science & Engineering, vol. 14, pp. 1-12, 2016.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

A. Calvo, N. Ordás, I. Iturriza, J.Y. Pastor, E. Tejado, T. Palacios, C. García-Rosales, "Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes", Physica Scripta, vol. 2016, no. T167, 14041, February 20, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

Nerea Isasti, Denis Jorge-Badiola, Jon Alkorta, Pello Uranga, "Analysis of Complex Steel Microstructures by High-Resolution EBSD", JOM, vol. 68, no. 1, pp. 215-223, January 2016.

Publication type: Scientific Journals.

Research fields: Materials, Multiscale Mechanics of Materials, Thermomechanical Treatments

Download

Jon Arruabarrena, Beatriz López, Jose M. Rodriguez-Ibabe, "Influence of DIT Parameters on the Cementite Spheroidization in a Low-Alloy Medium Carbon Steel", Metallurgical and Materials Transactions A, vol. 47, no. 1, pp. 412-423, January 2016.

Publication type: Scientific Journals.

Research fields: Materials, Thermomechanical Treatments

Download

Jesús Gutiérrez-Gutiérrez, Marta Zárraga-Rodríguez, "Orthogonal diagonalization for complex skew-persymmetric anti-tridiagonal Hankel matrices", Special Matrices, vol. 4, no. 1, pp. 73-79, January 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

I. Castro-Hurtado, J. Gonzalez-Chávarri, J., S. Morandi, J. Samà, A. Romano-Rodríguez, E. Castaño, G. G. Mandayo, "Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques", RSC Advances, vol. 6, no. 22, pp. 18558-18566, 2016.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

M.H. Bocanegra-Bernal, C. Dominguez-Rios, J. Echeberria, A. Reyes-Rojas, A. Garcia-Reyes, A. Aguilar-Elguezabal, "Spark plasma sintering of multi- , single/double- and single-walled carbon nanotube-reinforced alumina composites: Is it justifiable the effort to reinforce them?", Ceramics International, vol. 42, no. 1, Part B, pp. 2054-2062, January 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

L. Llanos, B. Pereda, B. Lopez, J.M. Rodriguez-Ibabe, "Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels", Materials Science & Engineering A, vol. 651, pp. 358-369, 10 January 2016.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

I. Adin, J. Mendizabal, S. Arrizabalaga, U. Alvarado, G. Solas, J. Rodriguez, "Rolling stock emission testing methodology assessment for Balise Transmission Module system interoperability", Measurement, vol. 77, pp. 124-131, January 2016.

Publication type: Scientific Journals.

Research fields: Embedded Systems and Networks

Download

David del Rio, Iñaki Gurutzeaga, Hector Solar, Andoni Beriain, Roc Berenguer, "Layout-aware design methodology for a 75 GHz power amplifier in a 55 nm SiGe technology", Integration-The VLSI Journal, vol. 52, pp. 208-216, January 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

2015

Miguel Aizpun-Navarro, Ignacio Sesma-Gotor, "The effect of crosswinds on ride comfort in high speed trains running on curves / Influencia del viento lateral en el confort de vehículos ferroviarios de alta velocidad circulando en curvas", DYNA, vol. 82, no. 194, pp. 46-51, December, 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

G.G. Mandayo, J. Gonzalez-Chavarri, I. Castro-Hurtado, E. Castaño, "Nanostructrured conductometric sensors for the detection of low concentration of gaseous polluitants", SGS, Zakopane-Poland, 13-16 diciembre, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

N. Gil-González, C.Q. Chen, A. Zuzuarregi, A. Rodríguez, M. Knez, E. Castaño, M.C. Morant-Miñana, "AZO interdigitated finger electrodes prepared by ALD", IBERNAM 2015, Zaragoza, 10-11 diciembre, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Itziar Fraile, Maitane Gabilondo, Irene Castro, Nerea Burgos, Mikel Azcona, Enrique Castaño, Francisco Castro, "Spin Coating Printed PZT thick films", Encuentro Anual IBERNAM, Zaragoza 10-11 Diciembre 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Microelectronics & Microsystems, Consolidation of Metallic and Ceramic Powders, Micro and Nano Systems

A. Días, A. Rodríguez, M. Martínez-Calderón, M. Gómez-Aranzadi, S.M. Olaizola, "Ultrafast laser inscription of volume phase gratings with low refractive index modulation and self-images of high visibility", Optics Express, vol. 23, no. 20, pp. 26683-26688, 2015.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

G. G. Mandayo, J. Gonzalez-Chavarri, E. Hammes, H.Newton, I. Castro-Hurtado, I. Ayerdi, H.Knapp, A. Sweetman, C.N. Hewitt, E. Castaño, "System to control indoor air quality in energy efficient buildings", Urban Climate, vol. 14, part 3, pp. 475-485, December 2015.

Publication type: Scientific Journals.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

Carlos E. Saavedra, David del Rio, Roc Berenguer, "68-73 GHz Common-Base HBT Amplifier in 55 nm SiGe Technology", Global Symposium on Millimeter-Waves (GSMM), Montreal, QC, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

C. Bilbao, S. Sainz, A. Veiga, F. Castro, "Microstructural development and effect of different Cu/C contents on dimensional changes during sintering of PM steels", Powder Metallurgy, vol. 58, no. 5, pp. 328-334, December, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

A. Cazón, L. Matey, "A Course on Prototypes for Engineers v2.0", Servicio de Publicaciones de la Universidad de Navarra (ISBN 978-84-8081-461-4), 2015.

Publication type: Book.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Angel Rubio, Fernando de Villar, "Code Profiling in R: A Review of Existing Methods and an Introduction to Package GUIProfiler ", R. Journal, vol. 2, pp. 275-287, December 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Manuel de Freitas, Francesco Iacoviello, Antonio Martín-Meizoso, "1st multi-lateral workshop on fracture - Preface", Theoretical and Applied Fracture Mechanics, vol. 80, part A, pp. 1, December 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

T. Garcia, S. Cicero, F.T. Ibáñez, J.A. Álvarez, A. Martín-Meizoso, A. Bannister, A. Klimpel, J. Aldazabal, "Fatigue performance of thermally cut bolt holes in structural steel S460M", Procedia Engineering, vol. 133, pp. 590-602, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Jon Ander Santamaría, Jon Alkorta, Javier Gil Sevillano, "Microcompression tests of single-crystalline and ultrafine grain Bi2Te3 thermoelectric material", Journal of Materials Research, vol. 30, no. 17, pp. 2593-2604, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Gorka Vélez, Ainhoa Cortés, Marcos Nieto, Igone Vélez, Oihana Otaegui, "A reconfigurable embedded vision system for advanced driver assistance", Journal of Real-Time Image Processing, vol. 10, no. 4, pp. 725-739, December, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

Josu Martinez-Perdiguero, Luis Mendizabal, Maria C. Morant-Miñana, Irene Castro-Hurtado, Aritz Juarros, Rocío Ortiz, Ainara Rodriguez, "Electrical insulation and breakdown properties of SiO2 and Al2O3 thin multilayer films deposited on stainless steel by physical vapor deposition", Thin Solid Films, vol. 595, pp. 171-175, 30 November 2015.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

Download

M. Arenas, A. Podhorski, S. Arrizabalaga, J.Goya, B. Sedano, J. Mendizabal, "Implementation and validation of an Angle of Arrival (AOA) determination system ", DCIS 2015, 25-27 November, Estoril (Portugal). XXX Conference on Design of Circuits and Integrated Systems, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Nerea Ordás, Luis Carlos Ardila, Iñigo Iturriza, Fermín Garciandia, Pedro Álvarez, Carmen García-Rosales, "Fabrication of TBMs cooling structures demonstrators using additive manufacturing (AM) technology and HIP", Fusion Engineering and Devices, vol. 96-97, pp. 142-148, October 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Federico Martin Ibanez, Jose Martin Echeverria, Daniel Astigarraga, Luis Fontan, "A soft-switching forward DC-DC converter using a continuous current mode for electric vehicle applications", IET Power Electronics, vol. 8, no. 10, pp. 1978-1986, 2015. ISSN 1755-4535.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Aitor Cazón, Jorge G. Prada, Eric García, Gorka S. Larraona, Sergio Ausejo, "Pilot study describing the design process of an oil sump for a competition vehicle by combining additive manufacturing and carbon fibre layers", Virtual and Physical Prototyping, vol. 3, no. 10, pp. 149-162, 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

P. Uranga, J.M. Rodriguez-Ibabe, "Review of Metallurgical Issues Intervening in Hot Rolling", Conferencia Invitada. Proceedings of the International Symposium on TSCR Microalloyed Steels, TSCR 2015, Beijing, China, November 8-9th, pp. 152-180, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

P. Uranga, J.M. Rodriguez-Ibabe, "Microstructure-Mechanical Property Relationships in HSLA Steels", Conferencia Invitada. Proceedings of the International Symposium on TSCR Microalloyed Steels, TSCR 2015, Beijing, China, November 8-9th, pp. 181-210, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

P. Uranga, J.M. Rodriguez-Ibabe, "Metallurgical Singularities of Thin Slab Direct Rolling", Conferencia Invitada. Proceedings of the International Symposium on TSCR Microalloyed Steels, TSCR 2015, Beijing, China, November 8-9th, pp. 212-229, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

J.M. Rodriguez-Ibabe, "Continuous Casting and Hot Ductility", Conferencia Invitada. Proceedings of the International Symposium on TSCR Microalloyed Steels, TSCR 2015, Beijing, China, November 8-9th, pp. 230-254, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

B. Pereda, P. Uranga, B. López, J.M. Rodriguez-Ibabe, D. Stalheim, R. Barbosa, M.A. Rebellato, "Through-thickness Homogenization in Thin Slab Direct Rolling of Nb Microalloyed Steels", Conferencia Invitada. Procs. of HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 Copnference, The Chinese Society for Metals (CSM) and Chinese Academy of Engineering (CAE), TMS, Hangzhou, China, November 11-13th, pp. 309-315, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

E. Aymerich, M. Esteban-Gutierrez, E. Roche, J. Suescun, I. Irizar, "Practical experiences on simulating full-scale IC reactors for pulp and paper mill wastewater", 14th World Congress on Anaerobic Digestion, Viña del Mar, Chile, 15-18 November 2015.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M. Esteban-Gutierrez, E. Aymerich, L. Sancho, "Potential of high-solids anaerobic digestion as a technology to produce VFA-rich by-products", 14th World Congress on Anaerobic Digestion. Viña del Mar, Chile, 15-18 November.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

M. Esteban-Gutierrez, J. Odriozola, E. Ayesa, E. Aymerich, "A novel approach to explore the potential of co-digestion", 14th World Congress on Anaerobic Digestion. Viña del Mar, Chile, 15-18 November.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Sludge and Solid Wastes

I. Irizar, E. Aymerich, M. Esteban-Gutierrez, "Design of a probing controller for optimizing co-digestion in anaerobic plants", 14th World Congress on Anaerobic Digestion. Viña del Mar, Chile, 15-18 November, 2015.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

Asier Perallos, Unai Hernandez-Jayo, Enrique Onieva, Ignacio Julio García-Zuazola, Nerea Aguiriano, Alfonso Brazalez, "Methodology for an Intelligent in-Car Traffic Information Management System", Intelligent Transport Systems: Technologies and Applications, chapter 15, pp. 290-312, 5 November 2015.

Publication type: Book Chapter.

Research fields: Applied Mechanics, ITS and Simulators

Download

O. Mitxelena Iribarren, M. Mujika Garmendia, E. Pérez Lorenzo, M.J. Blanco Prieto, S. Arana Alonso, "Simulación y desarrollo de una plataforma microfluídica para estudios celulares dinámicos in vitro", Presentación oral. CASEIB 2015, Madrid, 4-6 noviembre, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

B.K. Tanner, J. Garagorri, E. Gorostegui-Colinas, M.R. Elizalde, R. Bytheway, P.J. McNally, A.N. Denilewsky, "The geometry of catastrophic fracture during high temperature processing of silicon", International Journal of Fracture, vol. 195, no. 1, pp. 79-85, september 2015.

Publication type: Scientific Journals.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Gavish, N., Gutierrez, T., Webel, S., Rodriguez, J., Peveri, M., Bockholt, U. Tecchia, F., "Evaluating virtual reality and augmented reality training for industrial maintenance and assembly tasks ", Interactive Learning Environments, vol. 23, no. 6, pp. 778-798, November 2, 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Ainhoa Rezola, Aritz Alonso, Juan Francisco Sevillano, Iñaki Gurutzeaga, Roc Berenguer, Igone Vélez, "Implementation of a Zero-Second-IF Transmitter for Wide-Band Millimeter-Wave Links", XXX Conference on Design of Circuits and Integrated Systems, 25-27 November, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Pereda Beatriz, Uranga Pello, López Beatriz, Rodriguez-Ibabe Jose M., Liu Zhongzhu, Stalheim Douglas, Barbosa Ronaldo, Arantes-Rebellato Marcelo, "Thin Slab Direct Rolling Modeling of Nb Microalloyed Steels", Proceedings of the 10th CSM Steel Congress and the 6th Baosteel Biennial Academic Conference, October 21-23, 2015, Shanghai, China. Paper no. 262.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. Esteban, A. López, A. Iza-Mendia, I. Gutiérrez, "Simulation of Water Quenching of Long Duplex Products by FEM and Relationship with the Onset of Intermetallic Phase Precipitation in Controlled Cooling Tests", The Stainless Steel World Conference & Exhibition 2015 MECC, Maastricht, The Netherlands, 17th - 19th November, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

R. Rodriguez, A. Iza-Mendia, D. Jorge-Badiola, I. Gutiérrez, "Optimization of the Chemical Composition and Microstructure of UNS 32750 for Umbilical Tubing", The Stainless Steel World Conference & Exhibition 2015 MECC, Maastricht, The Netherlands, 17th - 19th November, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Aida Calvo, Nerea Ordás, Iñigo Iturriza, José Ygnacio Pastor, Elena Tejado, Freimut Koch, Henry Greuner, Gerald Pintsuk y Carmen García-Rosales, "Manufacturing and testing of self-passivating tungsten alloys of different composition", 17th Int. Conf. on Fusion reactor Materials, Aachen, Germany, October 11th – 16th, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

Ana Zuzuarregui, David Souto, Eva Pérez-Lorenzo, Fernando Arizti, Susana Sánchez-Gómez, Guillermo Martínez de Tejada, Klaus Brandenburg, Sergio Arana, Maite Mujika , "Novel integrated and portable endotoxin detection system based on an electrochemical biosensor", Analyst, vol. 140, no. 2, pp. 654-660, 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Electronics & Communications, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS, Digital Signal Processing and Digital Implementation

Download

Ander Aramburu, Isabel Zudaire, María J. Pajares, Jackeline Agorreta, Alberto Orta, María D. Lozano, Alfonso Gúrpide, Javier Gómez-Román, Jose A. Martines-Climent, Jacek Jassem, Marcin Skrzypski, Milind Suraokar, Carmen Behrens, Ignacio I. Wistuba, Ruben Pio, Angel Rubio, Luis M. Montuenga, "Combined clinical and genomic signatures for the prognosis of early stage non-small cell lung cancer based on gene copy number alterations", BMC Genomics, vol. 16, no. 752, 6 october 2015.

Publication type: Scientific Journals.

Research fields: Electronics & Communications, Bioinformatics

Download

D. Valderas, J. del Portillo, N. Gil-Negrete, J.I. Sancho, G. Lancaster, H. Lehmann, "Electromagnetic and thermal modelling for Eddy Current Brakes in high speed trains and interaction with wheel sensors", EuroBrake 2015 (Europe's braking technology conference and exhibition), Dresden (Germany), 4-6 May 2015.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Electronics & Communications, Embedded Systems and Networks, Railway Dynamics and Road Infrastructure

A. Guiral, A. Alonso, J.G. Giménez, "Vehicle-track interaction at high frequencies - Modelling of a flexible rotating wheelset in non-inertial reference frames", Journal of Sound and Vibration, vol. 355, pp. 284-304, October, 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

S. Sainz, C. Bilbao, A. Veiga, F. Castro, "Improved sintering of Fe-Cu-C PM steels", EURO PM2015, Reims, France, 4-7 October, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Sainz, C. Bilbao, F. Castro, "Microstructural characterization of the surface layer of PM steels after Low Pressure Carburizing", EURO PM2015, Reims, France, 4-7 October, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Merideno, J. Nieto, N. Gil-Negrete, A. Landaberea, J. Iartza, "Experimental evaluation and comparison of damping solutions for railway wheels", The 22nd International Congress on Sound and Vibration (ICSV22). Florence (Italy). 12-16 July 2015.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

D. Jorge-Badiola, P. Uranga, C.-P. Reip, J.M. Rodriguez-Ibabe, "Analysis of mechanisms triggering brittle process in the ductile-brittle regime in HSLA steels", Contributed Papers from Materials Science and Technology (MS&T) 2015, October 4–8, 2015, Columbus, Ohio, USA, pp. 685-692.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, P. Uranga, "Relevance of Time Between Last Deformation Pass and Accelerated Cooling on the Microstructural Refinement in Nb and Nb-Mo Microalloyed Steels", Contributed Papers from Materials Science and Technology (MS&T) 2015, October 4–8, 2015, Columbus, Ohio, USA, pp. 981-988.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Laura Llanos, Beatriz Pereda, Beatriz López, "Interaction Between Recovery, Recrystallization, and NbC Strain-Induced Precipitation in High-Mn Steels", Metallurgical and Materials Transactions A, vol. 46, no. 11, pp. 5248-5265, november 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

L. Rojo, I. Castro-Hurtado, M.C. Morant-Miñana, G. G. Mandayo, E. Castaño, "Enhanced features of Li2CO3 sputtered thin films induced by thickness and annealing time", CrystEngComm, vol. 17, pp. 1597-1602, 2015.

Publication type: Scientific Journals.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

J. González-Chávarri, I. Castro-Hurtado, I. Ayerdi, E.Castaño, G.G. Mandayo , "ZnO conductometric sensor for indoor air quality measurement inside buildings", Oral presentation. CDE 2015, 10th Spanish Conference On Electron Devices, 11-13 Febrero, Aranjuez, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

Jacobo Paredes, Kathryn D. Fink, Richard Novak, Dorian Liepmann, "Self-anchoring nickel microelectrodes for rapid fabrication of functional thermoplastic microfluidic prototypes", Sensors and Actuators B: Chemical, vol. 216, pp. 263-270, September 2015.

Publication type: Scientific Journals.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Emma Gil, Nerea Ordás, Carmen García-Rosales and Iñigo Iturriza, "Microstructural characterization of ODS ferritic steels after HIPping and heat treatments at different temperatures", EURO PM2015, Reims, France, 4-7 October, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

M. Aristizabal, J Cortés, M.H. Loretto, M.M. Attallah, I.Iturriza, R.H.U. Khan., "Study of the influence of outgassing parameters, powder particle size and HIP temperature in the mechanical properties of IN718", EURO PM2015, Reims, France, 4-7 October, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Moritz T. Lessmann, Aida Calvo, Christopher D. Hardie, Michael Porton, Nerea Ordás, Carmen García-Rosales, Paul M. Mummery, "Fracture strength testing of a self-passivating tungsten alloy at the micrometre scale", Nanomechanical Testing in Materials Research and Development V, Albufeira, Portugal, October 4-9, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

J. Pérez-Arbulu, N. Burgos, J.M. Martín, I. Elosegui, M. Martínez-Iturralde, G. Almandoz, A. Escalada , "Manufacturing of Isotropic Bonded NdFeB Magnets from Gas Atomised Powders", EURO PM2015, Reims, France, 4-7 Octubre, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Materials, Consolidation of Metallic and Ceramic Powders, Industrial and Power Systems

Jorge-Penas, A.,Munoz-Barrutia, A. de-Juan-Pardo, E.M., Oriz-de-Solorzano, C., "Validation tool for traction force microscopy", Computer Methods in Biomechanics and Biomedical Engineering, vol. 18, no. 13, pp. 1377-1385, October 3, 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

E. Gil, N. Ordás, C. García-Rosales, I. Iturriza, "Microstructural characterization of ODS ferritic steels at different processing stages", Fusion Engineering and Design, vol. 98-99, pp. 1973-1977, october 2015.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

Ainara Rodrıguez, Maria Carmen Morant-Miñana, Antonio Dias-Ponte, Miguel Martinez-Calderon, Mikel Gomez-Aranzadi, Santiago Miguel Olaizola, "Femtosecond laser-induced periodic surface nanostructuring of sputtered platinum thin films", Applied Surface Science, vol. 351, pp. 135–139, October 1, 2015.

Publication type: Scientific Journals.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

A. Larrañaga-Otegui, D. Jorge-Badiola, I. Gutiérrez, "Estudio del efecto de las condiciones de proceso y de la composición en la templabilidad de aceros al boro", Proceedings of TRATERMAT XIV Congreso Nacional de Tratamientos Térmicos y de Superficie, Vigo, 30 septiembre-1 octubre, 2015, pp. 261-270.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, P. Uranga, "Importancia del tiempo entre la última pasada de deformación y el enfriamiento acelerado en el afino microestructural en aceros microaleados con Nb y NbMo", Proceedings of TRATERMAT XIV Congreso Nacional de Tratamientos Térmicos y de Superficie, Vigo, 30 septiembre-1 octubre, 2015, pp. 271-279.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

F. Casado, A. Arriola, E. Arruti, I. Ortego, J.I. Sancho, "Frequency estimation for compact microstrip antennas", Electronics Letters, vol. 51, no. 7, pp. 546-548, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Nerea Isasti, Pedro Manuel García-Riesco, Denis Jorge-Badiola, Mitra Taheri, Beatriz López, Pello Uranga, "Modeling of CCT Diagrams and Ferrite Grain Size Prediction in Low Carbon Nb-Mo Microalloyed Steels", ISIJ International, vol. 55, no. 9, pp. 1963-1972, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Andoni Beriain, Iñigo Gutierrez, Hector Solar, Roc Berenguer, "0.5 V and 0.43 pJ/bit Capacitive Sensor Interface for Passive Wireless Sensor Systems", Sensors, vol. 15, no. 9, pp. 21554-21566, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies, Integrated Circuits Design & Antennas

Download

G. Solas, L.J. Valdivia, J. Añorga, A. Podhorski, J. Mendizabal, S. Pinte, L. Marcos, "Virtual Laboratory for on-board ETCS equipment", 18th IEEE Intelligent Transportation Systems Conference (ITSC2015), pp. 2013-2018, Las Palmas, 15-18 september, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

R. Neu, J. Riesch, J.W. Coenen, J. Brinkmann, A. Calvo, S. Elgeti, C. García-Rosales, H. Greuner, T. Hoeschen, G. Holzner, F. Klein, F. Koch, Ch. Linsmeier, A Litnovsky, T. Wegener, S. Wurster , J.-H. You, "Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants", 12th International Symposium on Fusion Nuclear Technology (ISFNT), ICC JEJU, Jeju Island Korea, 14-18 September, 2015.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

Behzad Heibati, Susana Rodriguez-Couto, Nurdan Gamze Turan, Okan Ozgonenel, Ahmad B. Albadarin, M. Asif, Inderjeet Tyagi, Shilpi Agarwal, Vinod Kumar Gupta, "Removal of noxious dye -Acid Orange 7 from aqueous solution using natural pumice and Fe-coated pumice stone", Journal of Industrial and Engineering Chemistry, vol. 31, pp. 124-131, 25 November 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

U. Palomares, M. Martinez-Calderón, I. Castro-Hurtado, M. Gomez-Aranzadi, A. Rodríguez, S.M. Olaizola, E. Castaño, G. Gª Mandayo, "Laser Induced Nanostructures on ZnO Thin Films for Morphology-controlled Gas Detection", Poster. TNT2015, Toulouse, France, 7-11 September, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Gonzalez-Chavarri, I. Castro-Hurtado, E. Castaño, G. G. Mandayo, "ZnO nanostructures to detect low concentrations of indoor pollutants", Poster. Eurosensors 2015, Freiburg, Germany, 6-9 September, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Iñaki Merideno, Javier Nieto, Nere Gil-Negrete, Aitor Landaberea, Jon Iartza, "An experimental comparison between existing damping solutions for railway wheels", Noise Control Engineering Journal, vol. 63, no. 5, pp. 448-459, 1 september 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

Jon Goya, Leticia Zamora-Cadenas, Saioa Arrizabalaga, Alfonso Brazález, Juan Meléndez, Jaizki Mendizábal, "Advanced Train LocAtion Simulator (ATLAS) for developing, testing and validating on-board railway location systems", EUROPEAN Transport Research Review, vol. 7, no. 24, september 2015. ISSN: 1867-0717 (Print).

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Electronics & Communications, Digital Signal Processing and Digital Implementation, Embedded Systems and Networks, Integrated Circuits Design & Antennas, ITS and Simulators

Download

J.A. Malumbres, M. Satrustegui, I. Elosegui, M. Martínez-Iturralde, "Coupled thermal and hydraulic algebraic models for an Open Self Ventilated Induction Machine", IET Electric Power Applications, vol. 9, no. 8, pp. 513-522, September 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Ion Irizar, Jesús Zambrano, Bengt Carlsson, Mikel Morrás, Enrique Aymerich, "Robust tuning of bending-points detection algorithms in batch-operated processes: Application to Autothermal Thermophilic Aerobic Digesters", Environmental Modelling & Software, vol. 71, pp. 148-158, September 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

Download

De Miguel, F., Pajares, M.J., Martinez-Terroba, E., Morales, X., Sharma, R.D., Rouzaut, A., Rubio, A., Montuenga, L., Pio, R., "Identification and Functional Characterization of Non-Small Cell Lung Cancer-Associated Splice Variants and Splicing Factors", Journal of Thoracic Oncology, vol. 10, no. 9, pp. S390-S390, supl. 2, Meeting Abstract MINI34.11, September, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

M. Aizpún, J. Vinolas, "Illustrating the implications of choices at the vehicle model building stage in simulation results", 24th Symposium of the International Association for Vehicle System Dynamics, IAVSD 2015, Graz, Austria, 17-21 August, 2015. The Dynamics of Vehicles on Roads and Tracks-Proceedings of the 24th IAVSD, 2015.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Fernando J. de Miguel, Ravi D. Sharma, Pablo Reclusa, María J. Pajares, Angel Rubio, Ruben Pio, Luis M. Montuenga, "Analysis of the functional relevance of novel alternative splicing events in non-small cell lung cancer", Cancer Research, vol. 75, no. 15, meeting abstract 2124, August 1, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Download

Larissa Gioia, Susana Rodríguez-Couto, María del Pilar Menéndez, Carmen Manta, Karen Ovsejevi, "Reversible covalent immobilization of Trametes villosa laccase onto thiolsulfinate-agarose: an insoluble biocatalyst with potential for decolouring recalcitrant dyes", Biotechnology and Applied Biochemistry, vol. 62, no. 4, pp. 502-513, July-August, 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Javier Añorga, Saioa Arrizabalaga, Beatriz Sedano, Maykel Alonso-Arce, Jaizki Mendizabal, "YouTube’s DASH implementation analysis", 19th International Conference on Circuits, Systems, Communications and Computers (CSCC 2015), Zakynthos, Grecia, 16-20 July, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

Javier Añorga, Leonardo Valdivia, Gonzalo Solas, Saioa Arrizabalaga, Jaizki Mendizabal, "Network Connection Fault Injection in Virtual Laboratory", Design Proceedings of the 30th International Technical Conference on Circuits/Systems, Computers and Communications (CSCC2015), Zakynthos Island, Greece, July 16-20, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Embedded Systems and Networks

J. Goya, L. Zamora, S. Arrizabalaga, G. de Miguel, I. Adin, J. Mendizabal, "BTS infrastructure impact analysis and design of an advanced BTS filtering for UKF-based positioning algorithm", 9th International Conference on Circuits, Systems, Communications and Computers, (CSCC 2015), Zakynthos Island, Greece, July 16-20, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Embedded Systems and Networks, Integrated Circuits Design & Antennas

Ainhoa Rezola, Juan Francisco Sevillano, David Del Río, Iñaki Gurutzeaga, Roc Berenguer, Igone Vélez, "Frequency-selective IQ Imbalance in zero-second-IF Transceivers for Wide-Band mmW Links", 19th International Conference on Circuits, Systems, 16-20 July, 2015.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Xabier Azpeitia, Pello Uranga, Jose M. Rodriguez-Ibabe, "Microstructural Analysis in Laser Hardened Crankshafts", International Conference on Advances in Metallurgy of Long and Forged Products, Vail, CO, pp. 158-168, 12-15 July, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M.C. Revilla, B. López, J.M. Rodriguez-Ibabe, "Interaction between MnS Particles and Austenite Microstructure during Hot Working of Free Cutting Steels", International Conference on Advances in Metallurgy of Long and Forged Products, Vail, CO, pp. 307-316, 12-15 July, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

B. López, J.M. Rodriguez-Ibabe, "Some metallurgical issues concerning austenite conditioning in microalloyed steels processed by near-net-shaping casting and direct rolling technologies", Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, PTM'2015. Whistler, Canada, 2015, pp. 1095-1102.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. M. García-Riesco, P. Uranga, B. López, J.M. Rodriguez-Ibabe, "Modelling the austenite to ferrite phase transformation in low carbon microalloyed steels in terms of grain size distributions", Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, PTM'2015. Whistler, Canada, 2015, pp. 917-924.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Dias, M. Martínez-Calderón, M. Gomez-Aranzadi, A. Rodríguez, S.M. Olaizola, "Near field diffraction of volume phase gratings inscribed in glass by direct laser writing", Póster. IX Reunión Española de Optoelectrónica (OPTOEL), Salamanca, Julio, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Dias, A. Rodriguez, I. Ayerdi, G. García-Mandayo, M. Gomez-Aranzadi, J. Escorihuela, M.J. Bañuls, A. Maqueira, S. Miguel Olaizola, "Sensor de SO2 basado en una red de difracción superficial fabricada con un láser de femtosegundos", Póster. IX Reunión Española de Optoelectrónica (OPTOEL), Salamanca, Julio, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

C. Bilbao, S. Sainz, F. Castro, "Evolución microestructural durante la sinterización de aceros pulvimetalúrgicos en el sistema Fe-Cu-C ", Congreso Nacional de Pulvimetalurgia, 1-3 Julio, Gerona, España, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

C. Luno-Bilbao, I. Iturriza, "Improvement in hardness and wear behaviour of sintered prealloyed bonds for diamond impreganted tools by heat treatments", Congreso Nacional de Pulvimetalurgia, 1-3 Julio, Gerona, España, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J. Pérez-Arbulu, N. Burgos, J.M. Martín, I. Elosegui, M. Martínez-Iturralde, G. Almandoz, A. Escalada, "Fabricación de Imanes Ligados de NdFeB a Partir de Polvos Obtenidos Mediante Atomización con Gas", V Congreso Nacional de Pulvimetalurgia, Gerona, España, 1-3 Julio, 2015.

Publication type: Conference Proceedings.

Ainhoa Rezola, Juan Francisco Sevillano, Martin Leyh, Moises Lorenzo, Roc Berenguer, Aharon Vargas, Igone Vélez, "IQ Imbalance in Heterodyne Transceivers with zerosecond-IF for Wide-Band mmW Links", International Journal on Advances in Networks and Services – IARIA Journal vol. 8, no. 1 y 2, pp. 25-34, June 30, 2015. ISSN: 1942-2601.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Aitziber Sáez, Iker Alústiza, Pedro M. Crespo, Xabier Insausti , "On the suitability of ML decoding in analog multiple description schemes", Signal Processing Advances in Wireless Communications (SPAWC), 2015 IEEE 16th International Workshop, pp. 615 - 619, June 28-July 1, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

M. Gomez-Aranzadi, A. Dias, M. Martinez-Calderon, A. Rodriguez, S.M. Olaizola, "Effect of the pulse duration on the surface roughness and the heat affected zone in laser micro polishing processes", Oral presentation. World Photonic Congress 2015 (LiM), 22-25 June, 2015.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Miguel Martinez-Calderon, Ainara Rodriguez, Antonio Dias, Mikel Gomez-Aranzadi, Santiago Miguel Olaizola, "Femtosecond laser manufacturing of higly hydrophobic hierarchical structures fabricated by combining surface microstructures and LIPSS", Oral presentation. World Photonic Congress 2015 (LiM), 22-25 June, 2015.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Dias, M. Martínez Calderón, T. Morlanes, J.L. de la Peña, M. Gómez-Aranzadi, A. Rodriguez, S.M. Olaizola, "Volume phase gratings inside borosilicate glass in the Raman-Nath regime with high visibility patterns in the near field diffraction", Poster. World Photonic Congress 2015 (The European Conference on Lasers and Electro-Optics 2015), 21-25 June, Munich (Germany), 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

R. Tomovska, N. Ormategi, S. Rodríguez-Couto, "Hybrid biocatalytic system based on enzyme lacasse immobilized onto 3D graphene/polymer porous hydrogels", Poster. European Polymer Federation Congress. Dresden (Germany), 21-26 June 2015.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Lexuri Vazquez, Jose Manuel Sanchez Moreno, "Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites", 14th Conference of the European Ceramic Society ECERS. Toledo, Spain, 21-25 June, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Josu Bilbao, Igor Armendariz, Pedro M. Crespo, "Network Coding based mechanism to provide reliable multimedia content distribution in harsh environments", 10th IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB), Ghent Univ., Ghent, Belgium, June 17-19, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Josu Bilbao, Igor Armendariz, Pedro M. Crespo, "Network Coding based mechanism to provide reliable multimedia content distribution in harsh environments", 2015 IEEE International Symposium on Broadband Multimedia Systems and Broadcastings (BMSB) Book Series: IEEE International Symposium on Broadband Multimedia Systems and Broadcastins, June 17-19, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Nerea Ormategi, Antonio Veloso, Gracia Patricia Leal, Susana Rodriguez-Couto, Radmila Tomovska, "Design of Stable and Powerful Nanobiocatalysts, Based on Enzyme Laccase Immobilized on Self- assembled 3D Graphene/Polymer Composite Hydrogels", ACS Applied Materials & Interfaces, vol. 7, no. 25, pp. 14104-14112, 15 june 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

S. Rodríguez-Couto, M. Miransari, "Soil Bioremediation by the Fungi, Trametes Genus", Published by AbtinBerkeh Ltd. Company, Isfahan, Iran and Creative Space, an Amazon Company, USA, 2015. ISBN-10: 1514264838 ISBN-13: 9781514264836.

Publication type: Book.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Iker Alustiza, Pedro M. Crespo, Baltasar Beferull-Lozano, "Analog Multiple Description Joint Source-Channel Coding Based on Lattice Scaling", IEEE Transactions on Signal Processing, vol. 63, no. 12, pp. 3046-3061, June 15, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

T. Fernandez-Arevalo, I. Lizarralde, S.I. Pérez-Elvira, J.M. Garrido, S. Puig, M. Poch, P. Grau, E. Ayesa , "Conceptual design and comparative assessment of WWTP layouts based on plant-wide model simulations", WATERMATEX 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment. Gold Coast, Queensland, Australia, 14-17 June, 2015.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

I. Lizarralde, I. Sesma-Pardo, J. Peral, I. Arruabarrena, J. Amores, P. Grau, A. Rivas, E. Ayesa, G.S. Larranoa, "CFD modelling of liquid-gas transfer processes for dissolved air flotation technology", WATERMATEX 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment. Gold Coast, Queensland, Australia, 14-17 June, 2015.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

I. Sesma-Pardo, A. Rivas, I. Lizarralde, J. Peral, I. Arruabarrena, J. Amores, E. Ayesa, P. Grau, G.S. Larraona, "A simple CFD approach for the simulation of the flow in dissolved air flotation tanks", WATERMATEX 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment. Gold Coast, Queensland, Australia, 14-17 June, 2015.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Lizarralde, I., Fernández-Arévalo, T., Beltrán, S., Ayesa, E., Grau, P., "Validation of multi-phase Plant-Wide Model for the description of the aeration system in a WWTP", WATERMATEX 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment, Gold Coast, Queensland, Australia, 14-17 June, 2015.

Publication type: Conference Proceedings.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

M. Sainz, J. Odriozola, T. Fernandez-Arevalo, L. Larrea, E. Ayesa, "A robust calibration methodology of wastewater treatment models based on Markov Chain Monte Carlo (MCMC) algorithms", WATERMATEX 2015: 9th IWA Symposium on Systems Analysis and Integrated Assessment. Gold Coast, Queensland, Australia, 14-17 June, 2015.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

M. Gomez-Aranzadi, A. Dias, M. Martinez-Calderon, A. Rodriguez, S.M. Olaizola, "Nuevas técnicas para el texturizado superficial y en volumen basadas en láseres ultrarrápidos", Presentación oral. 20 Congreso Máquinas-Herramienta y Tecnologías de Fabricación, 10-12 Junio, 2015.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Borja Prieto, Miguel Martínez-Iturralde, Luis Fontán, Ibon Elosegui, "Fault-tolerant permanent magnet synchronous machine – phase, pole and slot number selection criterion based on inductance calculation", IET Electric Power Applications, vol. 9, no. 2, pp. 138-149, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

K. Gurruchaga, A. Martínez-de-Guerenu, A. Lasaosa, F. Arizti, A. Guenetxea, X. Korta, "Control de calidad de husillos rectificados mediante la técnica no destructiva de emisión magnética de Barkhausen", Vigésima edición del congreso de Máquinas-herramienta y Tecnologías de Fabricación (20CMH), 10-12 Junio, San Sebastián, 2015.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Alba Garín-Muga, Diego Borro, Reyes Garcia-Eulate, Rafael Sanchez-Ostiz, Jorge Pla-Vidal, "DTIstatistics, a Clinical Developed Tool", International Psychogeriatric Association Bulletin, vol. 32, no. 2, pp. 8-9, June/July 2015.

Publication type: Scientific Journals.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Juan P. Fossati, Ainhoa Galarza, Ander Martín-Villate, José M. Echeverría, Luis Fontán, "Optimal scheduling of a microgrid with a fuzzy logic controlled storage system", International Journal of Electrical Power & Energy Systems, vol. 68, pp. 61-70, June 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

J. Arruabarrena, P. Uranga, B. López, J.M. Rodriguez-Ibabe, "Mejora de la esferoidización de aceros de medio carbono mediante la aplicación en tibio de bajas deformaciones", Trater: Revista del Tratamiento Térmico, n. 47, pp. 32-42, Junio 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

A. Cazón, L. Matey, M.I. Rodríguez, P. Morer, I. González, "Direct Digital Manufacturing for Sports and Medical Sciences", XXV INGEGRAF International Conference on Graphic Engineering. Spain, June 2015.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Computer Graphics, Simulation of Mechanical Systems

G.G. Mandayo, J. Gonzalez-Chavarri, I. Castro-Hurtado, I. Ayerdi, E. Castaño, E. Hammes, P. Ryser, H. Knapp, "The INTASENSE Project Approach for Toxic Gas Detection Indoors", Póster. ICAE-VII Congreso Internacional de Envolventes Arquitectónicas, Donostia-San Sebastián, Spain, 27-29 May, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

B. Pereda, P. Uranga, B. López, J.M. Rodriguez-Ibabe, M. Arantes-Rebellato, Vishwanathan Nagarajan, "Mill Data Based Microstructural Modelling for Thin Slab Direct Rolling of Nb Microalloyed Steels", Proceedings of the 4th International Conference on Thermomechanical Simulation and Processing of Steels (SimPro ’16), pp. 196-206, 10-12 February 2016: Ranchi, India.

Publication type: Conference Proceedings.

Research fields: Materials, Thermomechanical Treatments

M. Sainz, J. Odriozola, I. Irizar, C. Rodriguez, C. Perez, L. Larrea, "Advanced and optimum calibration-validation of nitritation, Anammox and biofilm models for MBBR processes", Poster. IWA Nutrient Removal and Recovery conference 2015: moving innovation into practice. Gdansk, Poland, 18-21 May.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Mikel Arenas, Adam Podhorski, Saioa Arrizabalaga, Jon Goya, Beatriz Sedano, Jaizki Mendizabal, "Implementation and validation of an angle of Arrival (AoA) determination system for real-time on-board train positioning", Transportation Research Procedia, vol. 14, pp. 1950-1956, 2016.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

Beriain, A., d’Entremont, E., de Chavarri, J.G., Zalbide, I., Berenguer, R., "EPC C1G2 compliant batteryless tire pressure monitoring tag with pressure and tire contact temperature", 10th International Workshop on Communication Technologies for Vehicles and Workshop on Nets4Cars/Nets4Trains/Nets4Aircraft, 2016, San Sebastian, Spain, vol. 9669, pp. 163-172, 6-7 June, 2016.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

David del Rio , Ainhoa Rezola , Roc Berenguer , Inaki Gurutzeaga , Igone Velez , Juan F. Sevillano, "A Wideband Millimeter-Wave Up-Conversion Mixer for Future Backhaul E-Band Point-to-Point Links with a 0dBm 1-dB Compression Point", 2015 IEEE International Conference on Ubiquitous Wireless Broadband (ICUWB), 4-7 October, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Download

G. García Mandayo, J. González de Chávarri, I. Castro-Hurtado, E. Castaño, "Post-process growth of nanostructures in metal oxides semiconductors for conductometric gas sensors", E-MRS 2014 Spring Meeting, Lille (France), 26-30 May, 2014.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Aida Calvo, Nerea Ordás, Iñigo Iturriza, José Ygnacio Pastor, Elena Tejado, Teresa Palacios, Carmen García-Rosales, "Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes", 15th International Conference on PFMC, Aix-en-Provence, France, May 18th - 22th, 2015.

Publication type: Conference Proceedings.

Research fields: Multiscale Mechanics of Materials

Sainz, Maider; Gabaldon, Carmen; Zalakain, Gorka; Larrea, Luis, "Optimum design and operation of SBR-IFAS process for maximum nutrient removal in small WWTPs", IWA Nutrient Removal and Recovery conference 2015: moving innovation into practice. Gdansk, Poland, 18-21 May.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Belen Lopez Ezquerra, Nieves Rodriguez, Jose M. Sánchez, "Comparison of the damage induced by thermal shock in hardmetals and cermets", International Journal of Refractory Metals and Hard Materials, vol. 61, pp. 147-150, December 2016.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

B.K. Tanner, J. Garagorri, E. Gorostegui-Colinas, M.R. Elizalde, D. Allen, P.J. McNally, J. Wittge, C. Ehlers, A.N. Danilewsky, "X-ray asterism and the structure of cracks from indentations in silicon", Journal of applied Crystallography, vol. 49, pp. 250-259, 2016.

Publication type: Scientific Journal.

Download

Shandra Sainz, Angela Veiga, Francisco R. Castro, "Sintered Mn-containing steels for high-performance applications", PowderMet 2015, San Diego, USA, 17-20 May, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Veiga, C. Bilbao, S. Sainz, F. Castro, "Controlled shrinkage of low alloy PM steels during LPS", PowderMet 2015, San Diego, USA, 17-20 May, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Iker Alustiza , Mikel Hernaez, Pedro Crespo, "Design of a new scheme for multi-hop wireless networks using decode-and-forward strategy", EURASIP Journal on Wireless Communications and Networking, vol. 136, 13 may 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

Ainhoa Rezola, Juan Francisco Sevillano, Igone Vélez, "Maiztasunarekiko independentea den I/Q desorekaren azterketa banda zabaleko mikrouhin loturetan", Iker Gazte, 13-15 Mayo, 2015.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Xabier Insausti, Aitziber Saez, Pedro M. Crespo, "A practical low-complexity coding scheme for the Multiple Access Channel inspired by the Compute-and-Forward Strategy ", Vehicular Technology Conference (VTC Spring), 2015 IEEE 81st, pp. 1-6, IEEE Conference Publications, 11-14 May, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

Miguel Martinez-Calderon, Ainara Rodriguez, Antonio Dias, Mikel Gomez-Aranzadi, Santiago Miguel Olaizola, "Highly hydrophobic hierarchical structures fabricated by femtosecond laser with a combination of surface microstructures and LIPSS", Presentación oral. 2015 Spring Meeting E-MRS, Symposium CC: Laser and plasma processing for advanced applications in material science, 11-15 Mayo, 2015.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Behzad Heibati, Susana Rodriguez-Couto, Mohammad A. Al-Ghouti, Mohammad Asif, Inderjeet Tyagi, Shilpi Agarwal, Vinod Kumar Gupta, "Kinetics and thermodynamics of enhanced adsorption of the dye AR 18 using activated carbons prepared from walnut and poplar woods", Journal of Molecular Liquids, vol. 208, pp. 99-105, august 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

A. Lasaosa, A. Martínez-de-Guerenu, K. Gurruchaga, F. Arizti, "Detección de defectos en el temple por inducción y rectificado de husillos en miniatura mediante la técnica de Emisión Magnética de Barkhausen", 13 Congreso Nacional de Ensayos No Destructivos, 6-8 de Mayo, Sevilla, 2015.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

M.X. Zambrano, A. Martínez-de-Guerenu, F. Arizti, "Caracterización magnética del deterioro a fatiga por flexión sobre polea en cables metálicos de pequeño diámetro", 13 Congreso Nacional de Ensayos No Destructivos, 6-8 de Mayo, Sevilla, 2015.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Borja Prieto, Miguel Martínez-Iturralde, Luis Fontán, Ibon Elosegui, "Analytical Calculation of the Slot Leakage Inductance in Fractional-Slot Concentrated-Winding Machines", IEEE Transactions on Industrial Electronics, vol. 62, no. 5, pp. 2742-2752, May 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Carlota Soto, José M. Martínez-Esnaola, Carmen García-Rosales, "Thermomechanical analysis of a Flow Channel Insert based on a SiC-sandwich material concept", Nuclear materials and Energy, vol. 7, pp. 5-11, May, 2016.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

M. Morras, J. Dosta, J.L. García-Heras , "Aerobic/anoxic post-treatment of anaerobically digested sewage sludge as an alternative to biological nitrogen removal from reject water", Bioprocess and Biosystems Engineering, vol. 38, no. 5, pp. 823-831, May 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

Download

Ainara Benavente-Babace, Sergio Arana, Derek J. Hansford, Eva Perez-Lorenzo, Maite Mujika, "Novel Fabrication and Operation of Microfluidic Platforms for On-Chip Single Cell Isolation and Bioanalysis ", 6TH European Conference of the Internatioanl Federation for Medical and Biological Engineering, IFMBE Proceedings, vol. 45, pp. 318-321, 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Macri-Pellizzeri, L., Pelacho, B., Sancho, A., Iglesias-Garcia, O., Simon-Yarza, A.M., Soriano-Navarro, M., Gonzalez-Granero, S., Garcia-Verdugo, J.M., De-Juan-Pardo, E.M., Prosper, F., "Substrate Stiffness and Composition Specifically Direct Differentiation of Induced Pluripotent Stem Cells ", Tissue Engineering Part A, vol. 21, no. 9-10, pp. 1633-1641, May 1, 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

I. Lizarralde, T. Fernández-Arévalo, C. Brouckaert, P. Vanrolleghem, D.S. Ikumi, G.A. Ekama, E. Ayesa, P. Grau , "A new general methodology for incorporating physico-chemical transformations into multi-phase wastewater treatment process models", Water Research, vol. 74, no. 1, pp. 239-256, May 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Download

Leila Badiefar, Bagher Yakhchali, Susana Rodriguez-Couto, Antonio Veloso, José Ma García-Arenzana, Yoshinobu Matsumura, Mahvash Khodabandeh, "Biodegradation of bisphenol A by the newly-isolated Enterobacter gergoviae strain BYK-7 enhanced using genetic manipulation", RSC Advances, vol. 5, pp. 29563-29572, 2015.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Isabel Gutiérrez, Amaia Iza-Mendia, "Relaciones microestructura-comportamiento mecánico en un acero microaleado con Nb", Trater: Revista del Tratamiento Térmico, n. 46, pp. 30-39, Abril 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

de Miguel, F.J., Sharma, R.D., Reclusa, P., Pajares, M.J., Rubio, A., Pio, R., Montuenga, L.M., "Analysis of the functional relevance of novel alternative splicing events in non-small cell lung cancer", 106th Annual Meeting fo the American-Association-for-Cancer-Research (AACR), Philadelphia, PA, April 18-22, 2015.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Bioinformatics

Kami Pars Benli, Baudouin Dillman, Ryma Louelh, Maria Poirier-Quinot, Luc Darrasse, "Illustrating the quantum approach with an Earth magnetic field MRI", European Journal of Physics, vol. 36, no. 3, 15 April 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

Ibai Leizea, Hugo Álvarez, Diego Borro, "Real time non-rigid 3D surface tracking using particle filter", Computer Vision and Image Understanding, vol. 133, pp. 51-65, April 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

Download

C. Blanco, J.M. Cabrero, A. Martin-Meizoso, K.G. Gebremedhin, "Design oriented failure model for wood accounting for different tensile and compressive behavior", Mechanics of Materials, vol. 83, pp. 103-109, April 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

M. Losada, A. Cortés, I. Velez, A. Irizar, "Miniaturización de Sistemas de Asistencia a la Conducción Embebidos una Plataforma Flexible y de Bajo Coste", XV Congreso Español Sistemas Inteligentes de Transporte, Madrid 14-16, Abril 2015. ISBN-13 978-84-606-7359-0.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Emily Hammes, Jurgi Gonzalez-Chavarri, Gemma Garcia Mandayo, Helmut F. Knapp, Peter Ryser, "The Transport Phenomena within the INTASENSE Indoor Air Quality Monitor Design", Oral Presentation. 2015 Spring Meeting and 10th Global Congress on Process Safety, Copenhagen, March 30-April 3, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Colin Atkinson, Ciprian D. Coman, Javier Aldazabal, "Couple stresses and the fracture of rock", Philosophical Transactions of the Royal Society A: Mathematical and Engineering Sciences, vol. 373, no. 2038, artículo 20140120, March 28, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

N. Isasti, D. Jorge-Badiola, P. Uranga, "Analysis of dislocation structures caused by phase transformations in Nb-Mo microalloyed steels using high resolution EBSD", Conferencia invitada: TMS 2015 Conference, March 15-19, 2015, Orlando, FL, USA.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

N. Isasti, B. Pereda, B. López, J.M. Rodriguez-Ibabe, P. Uranga, "Effects of combining Nb and Mo in HSLA Steels: From austenite conditioning to final microstructure", Chapter in the book: Fundamentals and applications of Mo and Nb Alloying in High Performance Steels - Volume 2, Edited by H Mohrbacher, CBMM, IMOA and TMS, pp. 1-28, 2015. (ISBN 978-0-692-34620-4).

Publication type: Book Chapter.

Research fields: Materials, Thermomechanical Treatments

Emily Hammes, Jurgi Gonzalez-Chavarri, Liam Henwood-Moroney, Gemma Garcia Mandayo, Peter Ryser, Helmut F. Knapp, "A Smart Air Quality Monitor for Energy Efficient Buildings", Oral Presentation. Smart Systems Integration 2015, Copenhagen, 11-12 March, 2015.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

S. Beltrán, I. Irizar, E. Ayesa, "Instrumentation, monitoring and real-time control strategies for efficient sewage treatment plant operation", Chapter 10, in Sewage Treatment Plants: Economic Evaluation of Innovative Technologies for Energy Efficiency. Stamatelatou, L. and Tsagarakis, K.P. (Eds.) IWA Publishing. pp. 189-212, 2015.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

Alberto Rezola, Jon Pey, Luis Tobalina, Angel Rubio, John E. Beasley, Francisco J. Planes, "Advances in network-based metabolic pathway analysis and gene expression data integration", Briefings in Bioinformatics, vol. 16, no. 2, pp. 265-279, March, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Download

Federico Martin Ibañez, Jose Martin Echeverria, Javier Vadillo, Luis Fontan, "A Step-Up Bidirectional Series Resonant DC/DC Converter Using a Continuous Current Mode", IEEE Transactions on Power Electronics, vol. 30, no. 3, pp. 1393-1402, March, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Ainhitze Mendizabal, Iker Aguinaga, Emilio Sánchez, "Characterisation and modelling of brain tissue for surgical simulation", Journal of the Mechanical Behavior of Biomedical Materials, vol. 45, pp. 1-10, May 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Irene Castro-Hurtado, Isabel Ayerdi, Enrique Castaño, Angel M.ª Gutierrez, Juan Ramón Arraibi , "Microsensors for the multiparametric analysis of natural gas quality ", Oral presentation. CDE 2015, 10th Spanish Conference On Electron Devices, 11-13 Febrero, Aranjuez, 2015.

Publication type: Conference Proceedings.

Download

Juan P. Fossati, Ainhoa Galarza, Ander Martín-Villate, Luis Fontán, "A method for optimal sizing energy storage systems for microgrids", Renewable Energy, vol. 77, pp. 539-549, May 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Mehdi Estili, J. Echeberria, J. Vleugels, K. Vanmeensel, Oleksandr B. Bondarchuk, N. Rodríguez, L. Larrimbe, A. Reyes-Rojas, C. Domínguez-Rios, M.H. Bocanegra-Bernal, A. Aguilar-Elguezabal, "Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: a novel way to delay hydrothermal degradation", Ceramics International, vol. 41, pp. 4569–4580, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Luis Tobalina, Rafael Bargiela, Jon Pey, Florian-Alexander Herbst, Iván Lores, David Rojo, Coral Barbas, Ana I. Peláez, Jesús Sánchez, Martin von Bergen, Jana Seifert, Manuel Ferrer, Francisco J. Planes, "Context-specific metabolic network reconstruction of a naphthalene-degrading bacterial community guided by metaproteomic data", Bioinformatics, January 23, vol. 31, no. 11, pp. 1771-1779, 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

Mikel Gomez-Aranzadi, Sergio Arana, Maite Mujika, Derek Hansford, "Integrated Microstructures to Improve Surface-Sample Interaction in Planar Biosensors", IEEE Sensors Journal, vol. 15, no. 2, pp. 1216-1223, February 2015.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Jon Pey, Juan A. Villar, Luis Tobalina, Alberto Rezola, José Manuel García, John E. Beasley, Francisco J. Planes, "TreeEFM: calculating elementary flux modes using linear optimization in a tree-based algorithm", Bioinformatics, vol. 31, no. 6, pp. 897-904, 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Download

Jose A. Malumbres, Marco Satrustegui, Ibon Elosegui, Juan C. Ramos, Miguel Martínez-Iturralde, "Analysis of relevant aspects of thermal and hydraulic modeling of electric machines. Application in a Open Self Ventilated machine", Applied Thermal Engineering, vol. 75, pp. 277-288, January 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

Martín A. Landeira Freire, Emilio Sánchez, Sonia Tejada, Ricardo Díez, "Desarrollo e implementación de una estrategia de gestión de singularidades para un sistema robótico redundante cooperativo destinado a la asistencia en intervenciones quirúrgicas", Revista Iberoamericana de Automática e Informática Industrial, vol. 12, no. 1, pp. 80-91, January-March 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation

Download

Prada, J.G., de Sabando, A.L., Anton, R., Martinez-Iturralde, M., "An Analysis of Soft Skills Development of a Formula Student (SAE) team", International Journal of Engineering Education, vol. 31, no. 1 (part B), pp. 209–219, January 2015.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Fernando Accini, Iñaki Díaz, Jorge Juan Gil, "Using an admittance algorithm for bone drilling procedures", Computer Methods and Programs in Biomedicine, vol. 123, pp. 150-158, January 2016.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

Download

Freire, M.A.L., Sanchez, E., Tejada, S., Diez, R., "Development and implementation of a singularity management strategy for a cooperative redundant robotic system destined to assistance during surgical interventions", Revista Iberoamericana de Automática e Informática Industrial, vol. 12, no. 1, pp. 80-91, January–March 2015.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

Download

Alastair R. Ruddle, Rob Armstrong, Ainhoa Galarza, "HEMIS Project (Electrical Powertrain HEalth Monitoring for Increased Safety of FEVs): Limitations of Electromagnetic Standards for Vehicles Equipped with Electrical Powertrain", Chapter 7 in Book: Electric Vehicle Systems Architecture and Standardization Needs. Reports of the PPP European Green Vehicles Initiative, Part II, pp 105-115, 2015. Lecture Notes in Mobility. Springer. ISBN: 978-3-319-13655-4 (Print) 978-3-319-13656-1 (Online).

Publication type: Book Chapter.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

A. Yunquera, D. Jorge-Badiola, I. Gutiérrez, A. Iza-Mendia, "Grain boundary engineering in a thermo-mechanically processed Nb stabilized austenitic stainless steel", IOP Conference Series: Materials Science and Engineering, vol. 82, 012113, pp. 1-4, 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

B. Pereda, Z. Aretxabaleta, B. López, "Softening Kinetics in High Al and High Al-Nb-Microalloyed Steels", Journal of Materials Engineering and Performance, vol. 24, no. 3, pp. 1279-1293, March 2015.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

J.M. Rodriguez-Ibabe, A. Iza-Mendia, B. Lopez, "Metallurgical roles of vanadium microalloying in eutectoids steel grades", Vanadium Microalloyed Steels, A Symposium in Memory of Michael Korchynsky, AIST, Warrendale, PA, pp. 65-72, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

2014

B. Sedano, P. Baraldi, M. Rigamonti, D. Astigarraga, "Assessment of the Improvement of the Safety and Reliability Embedding an Electrical Powertrain Health Monitoring in a FEV", European Electric Vehicle Congress, Brussels, Belgium, December 3-5, 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Luis Larrea, "Diseño de los procesos innovadores de mayor actualidad, tales como los reactores de membrana, los biofiltros granulares sumergidos, los procesos con lecho móvil y las tecnologías de nitritación parcial y anammox", 3 ponencias en CURSO: Remodelación de EDAR para la eliminación de nitrógeno, Madrid (Spain), 27 Noviembre, 2014. Infoedita (Eds.), 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Luis Larrea, "Eliminación de nitrógeno y fósforo: Fundamentos. Tecnologías convencionales e innovadoras", 3 ponencias en CURSO: Tratamiento de aguas residuales y explotación de estaciones depuradoras, Madrid (Spain), 18 y 19 de Noviembre, 2014. CEDEX [Ministerio de Fomento - MAGRAMA] (Eds.), 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

A. Sancho, J. Aldazabal, A. Rainer, E.M. de Juan-Pardo, "Rational Design of Artificial Cellular Niches for Tissue Engineering", Chapter in the book: "Tissue engineering: Computer Modeling, Biofabrication and Cell Behaviour". Editores: P.R. Fernandes y P.J. Bartolo, Springer, pp. 129-147, 2014, ISBN 978-94-007-7072-0.

Publication type: Book Chapter.

Research fields: Biomedical Engineering, Materials, Multiscale Mechanics of Materials, Tissue Engineering

Download

Natalia Remirez de Esparza, Nerea Cocera, Lexuri Vazquez, Jon Alkorta, Ibon Ocaña, Jose M. Sanchez, "Characterization of CVD bonded Tyranno fibers oxidized at high temperatures", Journal of the American ceramic society, vol. 12, no. 12, pp. 3958-3966, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Rodrigo F. Lagos-Cereceda, Kenny L. Alvarez-C., Jordi Vinolas Prat, Asier Alonso-Pazos, "Influencia de la elasticidad de vía al circular por un desvío ferroviario", Dyna Medellin, vol. 81, pp. 60-66, December 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

S. Rodríguez-Couto, "Degradation of azo dyes by white-rot fungi", Chapter in the book: "Microbial Degradation of Synthetic Dyes in Wastewaters". Singh, S.N. (ed.). Springer International Publishing, Switzerland, pp. 315-331, 2014.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Aitor Cazón, Paz Morer, Luis Matey, "PolyJet technology for product prototyping: Tensile strength and surface roughness properties ", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 228, no. 12, pp. 1664-1675, December 2014.

Publication type: Conference Proceedings.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

S. Rodríguez-Couto, "Fungal laccase in the textile industry", Chapter in the book: “Fungal Bio-molecules: Sources, Applications and Recent Developments”. Gupta, V.K., Sreenivasaprasad, S., Mach, R.L. (eds.). Wiley-Blackwell, pp. 63-72, 2015.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

S. Rodríguez-Couto, "Laccases: Green Biocatalysts for Greener Applications", Chapter in the book: “Industrial Biocatalysts”. Peter Gründwald (ed.). Pan Stanford Publishing Pte. Ltd., Singapore, pp. 697-715, 2014.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Alba Garin-Muga, Diego Borro, "Review and Challenges of Brain Analysis through DTI Measurements", Proceedings of the International Conference on Innovation in Medicine & Healthcare (INMED 2014), July 9-11, pp. 27-36, San Sebastian, Spain, 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation, Computer Graphics

C. Bilbao, S. Sainz, A. Veiga, F. Castro, "Microstructural Development and Effect of Different Cu/C Contents On Dimensional Changes during Sintering of PM Steels", European congress and exhibition on Powder Metallurgy EURO PM2014, Salzburg, Austria.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

E. Pérez-Lorenzo, A. Zuzuarregui, S. Arana, M. Mujika, "Development of a biological protocol for endotoxin detection using Quartz Crystal Microbalance (QCM)", Appl. Biochem. Biotechnol., vol. 174, no. 7, pp. 2492-2503, December 2014.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

S. Beltrán, I. Lizarralde, E. Ayesa, J. Gorriti, F. Ortega, A. de la Sota, J.M. Villanueva, "Estimación del potencial de ahorro en los sistemas de aireación de las EDAR mediante la medición de la transferencia de oxígeno", TecnoAqua, vol. 9, pp. 64-72, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, New Advanced Technologies for Wastewater Treatment

Susana Rodríguez-Couto, "Decolouration of industrial metal-complex dyes in successive batches by active cultures of Trametes pubescens", Biotechnology Reports, vol. 4, pp. 156-160, December, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

Isabel Machado, Vladimir R. Kaberdin, Susana Rodríguez-Couto, "Neomycin production revisited", Journal of Applied Biopharmaceutics and Pharmacokinetics, vol. 2, pp. 21-28, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

M. Trueba, D. Gonzalez, M.R. Elizalde, J.M. Martínez-Esnaola, M.T. Hernandez, H. Li, D. Pantuso, I. Ocaña, "Assessment of mechanical properties of metallic thin-films through micro-beam testing", Thin Solid Films, vol. 571, part 2, pp. 296-301, 28 november, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

M. Zanon, I. Rampin, R. Danizsweski, J. Echeberria, A.M. Martínez, A. Di Loreto, "Kupferpulver für Reibbeläge: gegenwärtige und zukünftige Ausrichtungen", The Hagener Symposium, Hagen, Germany, 27-28 Nov. 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Markos Losada, Pablo Del Campo, Andoni Irizar, Pedro Ruiz, Apostolos Leventis, "Design Principles and Challenges for an Autonomous WSN for Structural Health Monitoring in Aircrafts", Conference on Design of Circuits and Integrated Systems, Nov 26-28, 2014, Madrid, Spain..

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Aritz Alonso, Andoni Irizar, "Fast hardware-in-the-loop verification platform: a case study for convolutional decoders", Conference on Design of Circuits and Integrated Systems, Nov 26-28, 2014, Madrid, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Aritz Alonso, Juan F. Sevillano, Igone Vélez, "Parallel Implementation of a Sample Rate Conversion and Pulse-Shaping Filter for High Speed Backhauling Networks", Conference on Design of Circuits and Integrated Systems, Nov 26-28, 2014, Madrid, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

P. Baraldi, F. Di Maio, M. Rigamonti, E. Zio, A. Galarza, D. Astigarraga, I. Unanue, A. Ruddle, S. Rantala, "A Procedure for Practical Prognostics and Health Monitoring of Fully Electric Vehicles for Enhanced Safety and Reliability", HEVC 2014: 5th Hybrid and Electric Vehicle Conference, Hatfields, London, November 5-6, 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Javier Añorga, Jon Goya, Saioa Arrizabalaga, Iñaki Álvaro, Amador Pozo, "Context-aware QoE-based multimedia network architecture", International Journal of Engineering and Innovative Technology (IJEIT), vol. 4, no. 5, pp. 67-73, November 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

C. García-Rosales, P. López-Ruiz, S. Alvarez-Martín, A. Calvo, N. Ordás, F. Koch, J. Brinkmann, "Oxidation behaviour of bulk W-Cr-Ti alloys prepared by mechanical alloying and HIPing", Fusion Engineering and Design, vol. 89, no. 7-8, pp. 1611-1616, October 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

María X.Zambrano, Ane Martínez-de-Guerenu, Fernando Arizti, "Magnetic flux leakage measurement system to detect flaws in small diameter metallic wire ropes ", European conference on Non-Destructive testing (ECNDT 11), 6-10 October 2014, Prague (Czech Republic).

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

A. Lasaosa, K. Gurruchaga, A. Martínez-de-Guerenu, F. Arizti, "Estimation of residual stress profile by magnetic Barkhausen noise in machined steel studying different frequency bands", European conference on Non-Destructive testing (ECNDT 11), 6-10 October 2014, Prague (Czech Republic).

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Isabel Gutiérrez, "Effect of microstructure on the impact toughness of high strength steels", Revista de Metalurgia, vol. 50, no. 4, October–December 2014, e029.

Publication type: Scientific Journal.

Research fields: Thermomechanical Treatments

Download

M.X. Zambrano, A. Martínez-de-Guerenu, F. Arizti, "Inspección de defectos en cables metálicos de pequeño diámetro mediante la técnica de flujo magnético disperso", Revista de la Asociación Española de Ensayos No Destructivos (AEND), no. 69, 4º trimestre, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Fernando de las Cuevas, Alessandro Ferraiuolo, L. Pentti Karjalainen, Javier Gil Sevillano, "Propiedades mecánicas a tracción y mecanismos de endurecimiento de un acero TWIP a altas velocidades de deforamción: relación Hall-Petch", Revista de Metalurgia, vol. 50, no. 4, October–December 2014, e031.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Elosegui-Artola, A., Jorge-Penas, A., Moreno-Arotzena, O., Oregi, A., Lasa, M., Garcia-Aznar, J.M., De Juan-Pardo, E.M., Aldabe, R., "Image Analysis for the Quantitative Comparison of Stress Fibers and Focal Adhesions", Plos One, vol. 9, no. 9, September 30, 2014.

Publication type: Scientific Journal.

Download

Behad Heibati, Susana Rodríguez-Couto, Abdeltif Amrane, Mohd Rafatullah, Alaa Hawari, Mohammad A. Al-Ghouti, "Uptake of reactive black 5 by pumice and walnut activated carbon: chemistry and adsorption mechanisms", Journal of Industrial and Engineering Chemistry, vol. 20, pp. 2939-2947, 25 september, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

S. Beltran, J. Odriozola, S. Andersson, J. Zambrano, M. Mulas, P.-H. Bergström, S.-M. Hyyryläinen, G. Urchegui, "DIAMOND: AdvanceD data management and InformAtics for the optimuM operatiON anD control of WWTPs", IWA World Water Congress and Exhibition. Lisbon (Portugal), 21-26 September, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

M. Zanon, M. Nassuato, I. Rampin, J. Echeberria, A.M. Martínez, "The conductive behaviour of copper and silver-coated copper powders", Euro PM2014 Congress & Exhibition, Salzburg, Austria, 21-24 September 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Esteban-Gutiérrez, J. Odriozola, E. Ayesa, E. Aymerich, "A methodology to optimize methane production in co-digestion plants", Progress in Biogas III International Conference, Stuttgart (Germany), 10-11 September, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

I. Irizar, E. Aymerich, M. Esteban, X. Zhang, H. Spanjers, J. Paaso, K. Rahkamaa-Tolonen, "OPTI-VFA: Novel monitoring and process control system for efficient production of VFA and biogas in anaerobic digesters", Progress in Biogas III International Conference, Stuttgart (Germany) Anonymous, 10-11 September, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

Sheila Becerro, J. Paredes, S. Arana, "Multiparametric biosensor for detection and monitoring of bacterial biofilm adhesion and growth", MBEC 2014, 6th European Conference of the International Federation for Medical and Biological Engineering, Dubrovnik, Croatia, 7-11 September, 2014. Vol. 45 of the series IFMBE Proceedings, pp. 333-336.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Ainara Benavente-Babace, Sergio Arana, Derek J. Hansford, Eva Pérez-Lorenzo, Maite Mujika, "Novel Fabrication and Operation of Microfluidic Platforms for On-Chip Single Cell Isolation and Bioanalysis", MBEC 2014, 6th European Conference of the International Federation for Medical and Biological Engineering, Dubrovnik, Croatia, 7-11 September, 2014, vol. 45 of the series IFMBE Proceedings pp. 318-321, 2014.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

S. Sainz, F. Castro, M. Cordón, M. Eskubi, A. Etxeberria, "Metallic materials for high temperature operation in Stirling engines", 16th International Stirling Engine Conference, ISEC 24-26 September 2014, Bilbao, Spain.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Federico Ibanez, Jose Martin Echeverria, Javier Vadillo, Luis Fontán, "Frequency response analysis for bidirectional seriesresonant DC/DC converter in discontinuous mode", Power Electronics, IET, vol. 7, no. 9, pp. 2374-2386, September 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

A. Días, M. Gómez-Aranzadi, A. Rodríguez, S.M. Olaizola, "The contribution of filamentation and spherical aberration on the modified region in borosilicate glass", 23rd Congress of the ICO (International Commission for Optics), 26-29 Agosto, 2014.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

V. Kaberdin, B. I. Montánchez, E. Sevillano, A. Kaberdina, S. Rodríguez-Couto, L. Gallego, "Selection of soil microorganisms able to grow on minimal medium containing pentachlorobenzene as a sole carbon source", 15th International Symposium on Microbial Ecology (ISME 15), Seoul (Korea), 24-29 August, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

M. Trueba, D. Gonzalez, J.M. Martínez-Esnaola, M.T. Hernandez, D. Pantuso, H. Li, I. Ocaña, M.R. Elizalde, "Fracture characterization of brittle thin-films by membrane testing", Thin Solid Films, vol. 564, pp. 314-320, 1 August, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Jon Pey, Francisco J. Planes, "Direct calculation of Elementary Flux Modes satisfying several biological constraints in genome-scale metabolic networks", Bioinformatics, vol. 30, no.15, pp. 2197-2203, 1 August 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Bioinformatics

Download

A. Lasaosa, K. Gurruchaga, V. García Navas, A. Martínez-de-Guerenu, "Characterisation of in-depth stress state by magnetic Barkhausen noise on machined steel acquiring different frequency bands", European conference on residual stresses (ECRS 9), 7-10 July 2014, Troyes (France).

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

A. Lasaosa, K. Gurruchaga, V. García Navas, A. Martínez-de-Guerenu, "Characterisation of in-depth stress state by magnetic Barkhausen noise on machined steel acquiring different frequency bands", Advanced Materials Research, vol. 996, pp. 373-379, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

Ion Andreu, Tomás Luque, Ana Sancho, Beatriz Pelacho, Olalla Iglesias-García, Esther Melo, Ramón Farré, Felipe Prósper, M. Reyes Elizalde, Daniel Navajas, "Heterogeneous micromechanical properties of the extracellular matrix in healthy and infarcted hearts", Acta Biomaterialia, vol. 10, no. 7, pp. 3235-3242, July 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Materials, Tissue Engineering

Download

Ana Sancho, Lexuri Vázquez, Elena M De-Juan-Pardo, "Effect of the cold storage on collagen-based hydrogels for the three-dimensional culture of adipose-derived stem cells", Biofabrication, vol. 6, no. 3, pp. 1-11, july 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

L. Badiefar, B. Yakhchali, M. Khodabandeh, S. Rodríguez-Couto , "Environmental Microorganisms with High Potential for Bisphenol-A Degradation", Póster: EMBO Conference on Microbiology after the genomics revolution: Genomes 2014, Paris (France), 24-27 June, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

I. Lizarralde, T. Fernandez-Arevalo, M. Maiza, P. Grau, E. Ayesa, "Plant-Wide Model simulations for studying phosphorous recovery and energy costs in WWTPs", 2nd IWA Specialist Conference on EcoTechnologies for Sewage Treatment Plants (EcoSTP), Verona (Italy), 23-25 June, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

P. Pérez-Calleja, A.L. Esteban-García, I. Tejero, C. Gabaldón, L. Larrea, "Guidelines for the optimal operation of the Hybrid Membrane Aerated Biofilm process for nitrogen removal", 2nd IWA Specialist Conference on EcoTechnologies for Sewage Treatment Plants (EcoSTP), Verona (Italy), 23-25 June, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

Gemma García Mandayo, Jurgi González de Chávarri, "Evaluation methodology in the Digital System degree course", Tecnologías Aplicadas a la Ensenanza de la Electrónica (Technologies Applied to Electronics Teaching) (TAEE), 2014 XI, Bilbao, 11-13 Junio 2014.

Publication type: Conference Proceedings.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

I. Adin, M. Gomez-Aranzadi, J.R. Zambrano, I. Diaz, J. del Portillo, A. Beriain, "Design cycle and embedded systems platform applied to Industrial Electronics for an MSc program in Industrial Engineering", Tecnologías Aplicadas a la Ensenanza de la Electrónica (Technologies Applied to Electronics Teaching) (TAEE), pp. 1-7, 11-13 June, Bilbao, 2014 XI.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Electronics & Communications, Embedded Systems and Networks

Download

H.M. Newton, A. Sweetman, B. Davison, C.N. Hewitt, R. Bell, G. García Mandayo, J. González de Chávarri, H. Knapp, J. de las Heras, T. Geiling, M. Farries, T. Hauzer , "The INTASENSE project and complimentary studies of airborne VOC loading ", Annual Review Meeting: Outdoor and Indoor Air Pollution Research - 3rd & 4th June 2014 - Solihull (UK).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Gyeong-Man Kim, Seung-Mo Lee, Mato Knez, Paul Simon, "Single phase ZnO submicrotubes as a replica of electrospun polymer fiber template by atomic layer deposition", Thin solid films, vol. 562, pp. 291-298, July 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

M. Trueba, D. Gonzalez, J.M. Martínez-Esnaola, M.T. Hernandez, D. Pantuso, H. Li, M.R. Elizalde, I. Ocaña, "Fracture characterization of thin-films by dual tip indentation", Acta Materialia, vol. 71, pp. 44-55, June 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

F.M. Ibanez, J. Vadillo, J.M. Echeverria, L. Fontán, "Anomalous step-up behavior in discontinuous series resonant converters", Control and Modeling for Power Electronics (COMPEL), 2014 IEEE 15th Workshop on, pp. 1-6, 22-25 June 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

D. Astigarraga, F. Arizti, F.M. Ibanez, A. Galarza, "Online Indirect Measurement of ESR and Capacity for PHM of Capacitors", Poster: COMPEL 2014 - Fifteenth IEEE Workshop on Control and Modeling for Power Electronics. June 22 – 25, 2014, Santander, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

A. Días, M. Gómez-Aranzadi, A. Pan, A. Rodríguez, S.M. Olaizola, "Dimension analysis of the refractive index change in borosilicate glass induced by femtosecond laser irradiation", E-MRS 2014 Spring Meeting, Lille (France), 26-30 May, 2014.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Rodríguez, A. Pan, A. Días, M. Gómez-Aranzadi, S.M. Olaizola, "Formation of LIPSS on Niobium by femtosecond laser irradiation", E-MRS 2014 Spring Meeting, Lille (France), 26-30 May, 2014.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

J. González de Chávarri, I. Castro-Hurtado, G. García Mandayo, E. Castaño, "Conductometric gas sensor based on ZnO nanostructures for indoor pollutant detection", E-MRS 2014 Spring Meeting, Lille (France), 26-30 May, 2014.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

M. Mujika, I. Castro, S. Arana, E. Pérez-Lorenzo, "Technical creativity: knowledge for the generation of creative technological ideas", TAAE 2014.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

A. Pan, A. Días, M. Gómez-Aranzadi, S.M. Olaizola, A. Rodríguez, "Formation of LIPSS on Niobium by femtosecond laser irradiation", Journal of Applied Physics, vol. 115, no. 17, 2014.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

Lander Rojo, Iirene Castro-Hurtado, María C. Morant-Miñana, Gemma G. Mandayo, Enrique Castaño, "Li2CO3 thin films fabricated by sputtering techniques: the role of temperature on their properties", CrystEngComm, vol. 16, no. 27, pp. 6033-6038, April, 2014.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

Download

S. Arrizabalaga, J. Mendizábal, S. Pinte, J.M. Sánchez, J. M. Gonzalez, J. Bauer, M. Themistokleous, D. Lowe, "Development of an Advanced Testing System and Smart Train Positioning System for ETCS applications", Transport Research Arena (TRA2014) 5th Conference: Transport Solutions from Research to Deployment, Paris, 14th-17th April, 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

I. Lizarralde, C.J. Brouckaert, P.A. Vanrolleghem, D.S. Ikumi, G.A. Ekama, "Incorporating aquatic chemistry into wastewater treatment process models: a critical review of different approaches", 4th IWA/WEF Wastewater Treatment Modelling Seminar, Spa (Belgium), 30 March - 2 April, 2014.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

T. Zühlke, J. Alkorta, C. García-Rosales, A. Domínguez, I. Fernández, J. Gil Sevillano, "Structure and texture of twin roll cast strips of Zn-Cu-Ti zinc alloy", Materials Science and Tecnology, vol. 30, no. 1, pp. 91-95, January 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

J. del Portillo, I. Adin, J. Mendizabal, D. Valderas, I. Ortego, G. Solas, "Enhancing the rolling stock standards towards a harmonized electromagnetic environment", Transport Research Arena 2014, Paris La Defense (France), 14-17 April 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

Jon del Portillo, Daniel Valderas, Nere Gil-Negrete, Gavin Lancaster, Asier Alonso, "Electromagnetic and thermo-mechanical interaction between Eddy Current Brake and railway infrastructure", Eurobrake 2014, 13-15 May 2014, Lille (France).

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Electronics & Communications, Embedded Systems and Networks, Railway Dynamics and Road Infrastructure, Simulation of Mechanical Systems

Christoph Schmidt, Félix Casado, Aitor Arriola, Iñaki Ortego, Peter D. Bradley, Daniel Valderas, "Broadband UHF Implanted 3-D Conformal Antenna Design and Characterization for In-Off Body Wireless Links", IEEE Transactions on Antennas and Propagation, vol. 62, no. 3, pp. 1433-1444, March 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Jesús Gutiérrez-Gutiérrez, "Eigenvalue decomposition for persymmetric Hankel matrices with at most three non-zero anti-diagonals", Applied Mathematics and Computation, vol. 234, pp. 333-338, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

Martín Martínez, Federico Villagra, Francis Loayza, Marta Vidorreta, Gonzalo Arrondo, Elkin Luis, Javier Díaz, Mikel Echeverría, María A. Fernández-Seara, María A. Pastor, "MRI-Compatible Device for Examining Brain Activation Related to Stepping", IEEE Transactions on Medical Imaging, vol. 33, no. 5, pp. 1044-1053, may 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Iker Mesa, Eider Sanchez, Carlos Toro, Javier Diaz, Arkaitz Artetxe, Manuel Graña, Frank Guijarro, Cesar Martinez, Jose Manuel Jimenez, Shabs Rajasekharan, Jose Antonio Alarcon, Alessandro De Mauro, "Design and Development of a Mobile Cardiac Rehabilitation System", Cybernetics and Systems: An International Journal, vol. 45, pp. 92-108, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Iker Mesa, Angel Rubio, Imanol Tubia, Joaquin De No, Javier Diaz, "Channel and Feature Selection for a Surface Electromyographic Pattern Recognition Task", Expert Systems with Applications, vol. 41, no. 11, pp. 5190-5200, 1 September 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

Josu Bilbao, Aitor Calvo, Igor Armendáriz, Pedro M. Crespo, Muriel Médard, "Reliable Communications with Network Coding in Narrowband Powerline Channel", 2014 IEEE International Symposium on Power Line Communications and its Applications, pp 316 – 321, March 30-April 2, 2014, Glasgow, Scotland.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Information Theory, Coding & Compression Schemes for Communication Systems

George Zouridakis, Darshan Iyer, Javier Díaz, "Shizophrenia Assessment Using Single-Trial Analysis of Brain Activity", Charpter in book: Modern Electroencephalographic Assessment Techniques. Chapter: Schizophrenia Assessment Using Single-Trial Analysis of Brain Activity, vol. 91 of the series Neuromethods, pp.23 1-248, 12 February, 2014.

Publication type: Book Chapter.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

C. Aguilar, D. Guzmán, F. Castro, V. Martínez, F. de las Cuevas, S. Lascano, T. Muthiah, "Fabrication of nanocrystalline alloys Cu-Cr-Mo super satured solid solution by mechanical alloying", Materials Chemistry and Physics, vol. 146, pp. 493-502, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

C. Luno-Bilbao, A. Mancisidor, I. Iturriza, "TAILORING THE MECHANICAL PROPERTIES OF PREALLOYED DIAMOND IMPREGNATED BONDS BY DIFFERENT STRATEGIES", Ponencia oral realizada en Pm World Congress and Particulate Materials, May 2014, Orlando.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Trueba, A. Aramburu, N. Rodríguez, I. Iparraguirre, M.R. Elizalde, I. Ocaña, J.M. Sánchez, J.M. Martínez-Esnaola, ""In-situ" mechanical characterisation of WC-Co hardmetals using micro-beam testing", Int. Journal of Refractory Metals and Hard Materials, vol. 43, pp. 236–240, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

I. Iparraguirre, N. Rodriguez, F. Ibarreta, R. Martinez, J.M. Sanchez, "Effect of the Cr content on the sintering behaviour of TiCN-WC-Ni-Cr3C2 powder mixtures", Int. Journal of Refractory Metals and Hard Materials, vol. 43, pp. 125–131, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

I. Iparraguirre, N. Rodriguez, F. Ibarreta, R. Martinez, J.M. Sanchez, "EFFECT OF THE CR AND C CONTENTS ON THE SINTERING BEHAVIOUR OF TiCN-WC-Ni-CR3C2 POWDER MIXTURES", Pm World Congress and Particulate Materials, May 2014, Orlando.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Trueba, N. Rodríguez, I. Iparraguirre, M.R. Elizalde, I. Ocaña, J.M. Sánchez, J.M. Martínez-Esnaola, "MICRO BEAM TESTING: A NEW METHOD FOR THE MECHANICAL CHARACTERIZATION WC-CO HARDMETALS", Pm World Congress and Particulate Materials, May 2014, Orlando.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Y. Masip, M. Pasupathy, J.M. Martín, I. Iturriza, F. Castro, "CHARACTERISTICS OF WATER ATOMIZED PARTICLES PRODUCED USING A BROAD RANGE OF ATOMIZATION PRESSURES AND WATER-TO-MELT MASS RATIOS", Ponencia oral realizada en Pm World Congress and Particulate Materials, May 2014, Orlando.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Benavente-Babace, D. Gallego-Pérez, D. J. Hansford, S. Arana, E. Pérez-Lorenzo, M. Mujika, "Single-cell trapping and selective treatment via co-flow within a microfluidic platform", Biosensors and Bioelectronics, vol. 61, pp. 298-305, 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

D. Guzmán, P. Muñoz, C. Aguilar, I. Iturriza, L. Lozada, P.A. Rojas, M. Thirumurugan, C. Martínez, "Synthesis of Ag-ZnO powders by means of a mechanochemical process", Applied Physics A, vol. 117, no. 2, pp. 871-875, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

C. Revilla, B. López, J.M. Rodriguez-Ibabe, "Carbide size refinement by controlling the heating rate during induction tempering in a low alloy steel", Materials and Design, vol. 62, pp. 296-304, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Ainhoa Rezola, David del Rio, Juan Francisco Sevillano, Martin Leyh, Roc Berenguer, Igone Vélez, "Impact of AC Coupling on Zero-IF Architectures for Wide-Band Milimeter-Wave Gigabit Transmitters", European Wireless 2014. Barcelona, 14th-16th May 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

Ainhoa Rezola, Juan Francisco Sevillano, Martin Leyh, Moises Lorenzo, R. Berenguer, Igone Vélez, Aharon Vargas, "Non-frequency-selective I/Q Imbalance in Zero-IF Transceivers for Wide-Band mmW Links", International Conference on Wireless and Mobile Communications (ICWMC 2014). Best paper award.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

M. Morras, L. Larrea, J.L. García-Heras, "Model based operational guidelines of a bioprocess for biological nitrogen removal and complete stabilisation of anaerobically digested sewage sludge", Bioprocess and Biosystems Engineering, vol. 37, no. 7, pp. 1345-1352, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Sludge and Solid Wastes

Download

J. Albizuri, P. Grau, M. Christensson, L. Larrea , "Validating the colloid model to optimise the design and operation of both moving-bed biofilm reactor and integrated fixed-film activated sludge systems", Water Science and Technology, vol. 69, no. 7, pp. 1552-1557, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Download

T. Fernández-Arévalo, I. Lizarralde, P. Grau, E. Ayesa , "New systematic methodology for incorporating dynamic heat transfer modelling in multi-phase ", Water Research , vol. 60, pp. 141-155, september 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Download

Dalel Daassai, Susana Rodríguez-Couto, Moncef Nasri, Tahar Mechichi, "Biodegradation of textile dyes by immobilized laccase from Coriolopsis gallica into Ca-alginate beads", International Biodeterioration and Biodegradation, vol. 90, pp. 71-78, May 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

I. Irizar, S. Beltrán, G. Urchegui, G. Izko, O. Fernández, M. Maiza, "Lessons learnt from the application of a multi-variable controller for nitrogen removal in the Mekolalde wastewater treatment plant: Good simulation practices in control", Water Science and Technology, vol. 69, no. 6, pp. 1289-1297, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

Download

S. Rodríguez-Couto, A. Arzac, G. P. Leal, R. Tomovska , "Reduced graphene oxide hydrogels and xerogels provide efficient platforms for immobilization and laccase production by Trametes pubescens", Biotechnology Journal, vol. 9, no. 4, pp. 578-584, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

J.M. Rodriguez-Ibabe, B. López, "Relevance of the as-cast microstructure on final characteristics in TSDR technologies", Proceedings of the 8th European Continuous Casting Conference, Graz (Austria), Junio 23-26, 2014. ISBN-978-3-200-03664-2.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Marco Rigamonti, Piero Baraldi, Enrico Zio, Daniel Astigarraga, Ainhoa Galarza, "A Particle Filtering-Based Approach for the Prediction of the Remaining Useful Life of an Aluminum Electrolytic Capacitor", PHME'2014 - Second European Conference of the Prognostics and Health Management Society 2014, July 8-10 2014, Nantes, France. ISBN:978-1-936263-16-5,ISSN:2325-016X. Proceedings of the PHME'2014, volume 5.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Alba Garín-Muga, Jorge Pla-Vidal, Diego Borro, "An automatic tool to facilitate the statistical group analysis of DTI", Computers in Biology and Medicine, vol. 53, pp. 76-84, October 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

Nerea Isasti, Denis Jorge-Badiola, Mitra L. Taheri, Pello Uranga, "Microstructural Features Controlling Mechanical Properties in Nb-Mo Microalloyed Steels. Part I: Yield Strength", Metallurgical and Materials Transactions A, vol. 45, no. 11, pp. 4960-4971, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Nerea Isasti, Denis Jorge-Badiola, Mitra L. Taheri, Pello Uranga, "Microstructural Features Controlling Mechanical Properties in Nb-Mo Microalloyed Steels. Part II: Impact Toughness", Metallurgical and Materials Transactions A, vol. 45, no. 11, pp. 4972-4982, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Laura Llanos, Beatriz Pereda, Beatriz López, "Interacción entre ablandamiento y precipitación inducida por deformación en aceros microaleados con alto contenido en Mn", XIII Congreso Nacional de Materiales, Barcelona, 18-20 de Junio, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Pedro Manuel Garcia-Riesco, Pello Uranga, Beatriz López, "Influencia de la heterogeneidad microestructural de la austenita en la transformación de fase de aceros microaleados", XIII Congreso Nacional de Materiales, Barcelona, 18-20 de Junio, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

J. Arruabarrena, B. Lopez, J.M. Rodriguez Ibabe, "Aleazio baxu eta karbono ertaineko altzairuen esferoidizaketarako aurreprozesaketa era desberdinak", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 161-164, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Iza-Mendia, B. López, J.M. Rodriguez Ibabe, "Banadioaren funtzioak altzairu perlitikoetan", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 191-194, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Yunquera, A. Iza-Mendia, D. Jorge-Badiola, "Goi-Tenperaturatan erressistentzia handiko altzairu herdoilgaitz austenitiko baten mikroegituraren eragina isurpen geldoan", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 271-274, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

D. Jorge-Badiola, P. Uranga, N. Isasti, "Propietate mekanikoen eta mikroegituraren arteko erlazioa niobio-molibdeno altzairu mikroaleatutetan", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 167-170, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Susana Rodríguez-Couto, "Fungal laccases: a promising eco-friendly approach for the removal of pharmaceutical compounds", Chapter in the book: “Microbes in Process”. Garg, N., Aeron, A. (eds.). Nova Science Publishers Inc., Hauppauge, NY. ISBN: 978-1-63117-127-7, pp. 163-193, 2014.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

A. Larrañaga-Otegi, I. Gutiérrez, "Erresistentzi altuko borodun altzairuen garapena eta optimizazioa", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 9-12, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Larissa Gioia, Carmen Manta, Karen Ovsejevi, Juan Burgueño, Pilar Menéndez, Susana Rodriguez-Couto, "Enhancing laccase production by a newly-isolated strain of Pycnoporus sanguineus with high potential for dye decolouration", RSC Advances, vol. 4, no. 64, pp. 34096-34103, 2014.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

M. Mujika, A. Zuzuarregui, S. Sánchez-Gómez, G. Martínez de Tejada, S. Arana, E. Pérez-Lorenzo, "Screening and selection of synthetic peptides for a novel and optimized endotoxin detection method", Journal of Biotechnology, vol. 186, pp. 162–168, 2014.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

Download

N. Ordás, A. Bereciartu, C. García-Rosales, A. Moroño, M. Malo, E.R. Hodgson, J. Abellà, S. Colominas, L. Sedano, "Testing of porous SiC with dense coating under relevant conditions for Flow Channel Insert application", Fusion Engineering and Design, vol. 89, pp. 1274-1279, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

Iñaki Merideño, Javier Nieto, Nere Gil-Negrete, José Germán Giménez Ortiz, Aitor Landaberea, Jon Iartza, "Theoretical prediction of the damping of a railway wheel with sandwich-type dampers", Journal of Sound and Vibration, vol. 333 (issue 20), pp. 4897-4911, 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

N. Isasti, D. Jorge-Badiola, M.L. Taheri, P. Uranga, "Microstructural and precipitation characterization in Nb-Mo microalloyed steels, estimation of the contributions to the strength", Metals and Materials International, vol. 20, no. 5, pp. 807-817, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Yaiza Vélaz, Alberto Lozano-Rodero, Ángel Suescun, Teresa Gutiérrez, "Natural and hybrid bimanual interaction for virtual assembly tasks", Virtual Reality, vol. 18, no. 3, pp. 161-171, September 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Federico Ibanez, Jose Martín Echeverria, Javier Vadillo, Luis Fontán, "High Current Rectifier Topology Applied to a 4-kW Bidirectional DC-DC Converter", IEEE Transactions on Industry Applications, vol. 50, no. 1, pp. 68-77, January/February 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

A. Bertelsen, Alba Garín-Muga, M. Echeverría, E. Gómez, D. Borro, "Distortion correction and calibration of intra-operative spine X-ray images using a constrained DLT algorithm", Computerized Medical Imaging and Graphics, Special Issue on Computational Methods and Clinical Applications for Spine Imaging, vol. 38, no. 7, pp. 558-568, october 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

A. Alonso, A. Guiral, L. Baeza, S. Iwinicki, "Wheel-rail contact: experimental study of the creep forces-creepage relationships", Vehicle System Dynamics, vol. 52 (supplement 1), pp. 469-487, 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

Miguel Aizpun, Asier Alonso, Jordi Vinolas, "A new parameter identification methodology for a modal analysis test of a rail vehicle", Vehicle System Dynamics, vol. 52, no. 9, pp. 1139-1152, 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

Iñaki Díaz, Jorge Juan Gil, Marcos Louredo, "A Haptic Pedal for Surgery Assistance", Computer Methods and Programs in Biomedicine, vol. 116, no. 2, pp. 97-104, septiembre 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

Download

M. Turrillas, A. Cortés, I. Vélez, J.F. Sevillano, A. Irizar, "An area-efficient Radix 2^8 FFT algorithm for DVB-T2 receivers", Microelectronics Journal, vol. 45, pp. 1311-1318, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

A. Yunquera, D. Jorge-Badiola, A. Iza-Mendia, "Ingeniería de junta de grano aplicada a un acero inoxidable austenítico resistente a altas temperaturas: comportamiento bajo condiciones de fluencia lenta", XIV Congreso Nacional de Propiedades Mecánicas de Sólidos, PMS2014, Linares, 17-19 septiembre, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Iturriza, K. Essa, J. Cortes, F. Castro, R. Trepleton, C. Carpenter, R.H.U. Khan, M.M. Attallah, M.H. Loretto, "Net Shape HIPping components of IN718", Ponencia oral The 11th International Conference of Hot Isostatic Pressing, Stockholm, Sweden 9-13, June 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

R.H.U. Khan, M.H. Loretto, M.M. Attallah, J. Cortes, I. Iturriza, F. Castro, "Microstructure and properties of HIPped Inconel 718", The 11th International Conference of Hot Isostatic Pressing, Stockholm, Sweden 9-13, June 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Iraola, L. Lozada, A.M. Mancisidor, I. Iturriza, "Higadura Erressistentzia Altuko Altzairu Lasterren Ordenagailu Bidezco diseinua", Materialen Zientzia eta Teknologia II. Kongresua, UPV-EHU, pp. 13-16, 2014, ISBN: 978-84-9082-005-6.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Ibai Leizea, Hugo Álvarez, Iker Aguinaga, Diego Borro , "Real-Time Deformation, Registration and Tracking of Solids Based on Physical Simulation", Proceedings of the 13th IEEE International Symposium on Mixed and Augmented Reality (ISMAR 2014), pp. 165-170 (ISBN: 978-1-4799-6184-9). Munich, Bavaria, Germany. September 10-12, 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics

I. Merideno, J. Nieto, N. Gil-Negrete, J.G. Giménez Ortiz, A. Landaberea, J. Iartza, "Numerical characterization of railway wheels with sandwich-type damping solutions", Proceedings of ISMA 2014 International Conference on Noise and Vibration Engineering, pp. 3557-3570. Leuven, Belgium. 15-17 September, 2014. ISBN: 9789073802919.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Jorge Juan Gil, Iñaki Díaz, Xabier Justo, Pablo Ciáurriz, "Controlador Háptico Educacional basado en la Plataforma Arduino", XI Congreso de Tecnología, Aprendizaje y Enseñanza de la Electrónica, pp. 205-211. Bilbao (Spain), June 11-13, 2014. ISBN-13: 978-84-697-0349-6.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

J.M. Rodriguez Ibabe, "Del comportamiento mecánico de los Metales a la Ciencia de Materiales: un camino de ida y vuelta", Conferencia invitada en el XIV Congreso Nacional de Propiedades Mecánicas de Sólidos, PMS2014, Linares, 17-19 Septiembre, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M. Alonso-Arce, P. Bustamante, C. Schmidt, J. Legarda, B. Sedano, "Ultra low-power smart medical sensor node based on a central venous catheter for in-body biomonitoring", Innovation and Research in BioMedical engineering (IRBM), vol. 35, no. 6, pp. 362-369, December 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

I. Pasciuto, S. Ausejo, J.T. Celigüeta, A. Suescun, "Age-Related Dynamic Motion Strategies in Clutch Pedal Depressions", Proceedings of the 23rd Annual Meeting of ESMAC (European Society of Movement Analysis in Adults and Children), Roma, Italy, 29th September - 4th October, 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Imanol Herrera, Carlos Buchart, Iker Aguinaga, Diego Borro, "Study of a ray casting technique for the visualization of deformable volumes", IEEE Transactions on Visualization and Computer Graphics, vol. 20, no. 11, pp. 1555-1565, november 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biorobotics and Surgical Simulation, Computer Graphics

Download

Tomasz Schelenz, Ángel Suescun, Li Wikström, MariAnne Karlsson, "Application of agent based simulation for evaluating a bus layout design from passengers’ perspective", Transportation Research Part C: Emerging Technlogies, vol. 43, no. 2, pp. 222-229, June 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, Simulation of Mechanical Systems

Download

Sebastián F. Medina, Lucía Rancel, Manuel Gómez, José M. Cabrera, Isabel Gutierrez, "Microstructural Unit Controlling Cleavage Crack Propagation in High Strength Bainitic Steels", Key Engineering Materials, vol. 622-623, pp. 846-853, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A. Yunquera, D. Jorge-Badiola, A. Iza-Mendia, "Grain boundary engineering in a thermo-mechanically processed Nb stabilized austenitic stainless steel", 17th International Conference on Texture of Materials, ICOTOM´17. Dresden (Germany), August 25-29, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

J. Arruabarrena, P. Uranga, B. López, J. M. Rodriguez-Ibabe, "Different Routes for the Development of Ferrite-pearlite Microstructures Suitable for Spheroidization during Soft Annealing Treatments", Materials Science & Technology 2014 Conference, 12-17 October 2014, Pittsburgh, Pennsylvania, pp. 437-444.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

L. Llanos, B. Pereda, J.M. Rodriguez-Ibabe, B. Lopez, "Effect of V Microalloying in the Hot Working Behavior of High MN TWIP Steels", Vanadium Microalloyed Steels, A Symposium in Memory of Michael Korchynsky, AIST, Warrendale, PA, pp. 57-64, 2015.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Jon Alkorta, Jose Manuel Martinez-Esnaola, Isabel Gutierrez, Doug Rawson, Marco Verza, Samuele Reghellin, Javier Gil Sevillano, "Reverse vs. Effective Strain in the Ring-Rolling of Superalloy 718", 8th International Symposium on Superalloy 718 and Derivatives, September 28-October 1, 2014, Pittsburgh, Pennsylvania, pp. 83-92.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. Uranga, B. López, J.M. Rodríguez-Ibabe, "From Ferrous Metallurgy to Materials Science: a round trip", Conferencia invitada: Materials Science & Technology 2014 Conference, 12-17 October 2014, Pittsburgh, Pennsylvania, pp. 1161-1168.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

D. Jorge-Badiola, C.-P. Reip, J.M. Rodriguez-Ibabe, "Microstructural Features Intervening in Brittle Processes in Microalloyed High Strength Steels", Conferencia invitada: Materials Science & Technology 2014 Conference, 12-17 October 2014, Pittsburgh, Pennsylvania, pp. 1421-1428.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Isabel Gutierrez, Amaia Iza-Mendia, Alazne Altuna, Beatriz Pereda, "Precipitation of Nb in ferrite after austenite conditioning", Ponencia invitada: Charles Hatchett Seminar 2014: Modelling to Optimize the Processing of Niobium Steels, 16 de Julio 2014, Royal Society of Chemistry, London.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Isabel Gutierrez, "Effect of microstructure on the impact toughness of high strength steels", Conferencia invitada: Advanced Steels: challenges in Steel Science and technology, 18-19 de Septiembre 2014, Madrid.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Leticia Zamora-Cadenas, Ainhoa Cortés, Igone Vélez, "Radiofrequency-based indoor location systems for ambient assisted living applications", Journal of Ambient Intelligence and Smart Environments, vol. 6, no. 5, pp. 561-563, 2014.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Iker Porras Arteaga, Federico Martin Ibañez, Miguel Martinez-Iturralde, Ibon Elosegui, "Analytical Sizing Methodology for Inductive Power Transfer Systems", Poster: COMPEL 2014 - Fifteenth IEEE Workshop on Control and Modeling for Power Electronics. June 22-25, 2014, Santander, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

D. del Rio, R. Berenguer, A. Rezola, J. Francisco Sevillano, "66-87 GHz Power Amplifier with 20dBm 1-dB compression point and 35% peak PAE in a 55nm SiGe technology", PRIME: Conference on Ph.D. Research in Microelectronics and Electronics, 2014.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

C. García-Rosales, P. López-Ruiz, A. Calvo, S. Alvarez-Martín, N. Ordás, F. Koch, J. Brinkmann, "Oxidation behavior of bulk W-Cr-Ti alloys prepared by mechanical alloying and HIPing", Fusion Engineering and Devices, vol. 89, issues 7-8, pp. 1611-1616, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

Nerea Ordás, Luis Carlos Ardila, Iñigo Iturriza, Fermín Garciandia, Pedro Álvarez, Carmen García-Rosales, "Fabrication of TBMs cooling structures demonstrators using additive manufacturing (AM) technology and HIP", 28th Symposium on Fusion Technology (SOFT 2014), San Sebastián, Spain, 29th September - 3rd October 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Emma Gil, Miren Sarasola, Nerea Ordás, Carmen García-Rosales, Iñigo Iturriza, "Microstructural characterization of ODS ferritic steels at different processing stages", 28th Symposium on Fusion Technology (SOFT 2014), San Sebastián, Spain, 29th September - 3rd October 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Aida Calvo, Nerea Ordás, Iñigo Iturriza, Carmen García-Rosales, "Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes", Póster: 28th Symposium on Fusion Technology (SOFT 2014), San Sebastián, Spain, 29th September - 3rd October 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

G. Erkizia, J. Aldazabal, I. Aldazabal, G.-M. Kim, "In-Silico Simulation of Drug Delivery Systems via Volunteer Computing Platform IberCivis", 24th International Workshop on Computational Micromechanics of Materials, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J. Gil-Sevillano, I. Aldazabal, A. Luque, J. Aldazabal, "Atomistic simulation of the elongation response of a 011 oriented columnar nano-grain bcc Fe polycrystalline sample", 24th International Workshop on Computational Micromechanics of Materials, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

Carmen García-Rosales, "Tungsten as first wall material for ITER and beyond", Conferencia invitada: Scientific-Technological Workshop Induciencia: Production technologies for ITER base-of-design structural and functional materials, Barcelona, 4th June 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

O. Rexfelt, T. Schelenz, M. Karlsson, A. Suescun, "Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?", Transportation Research Part C: Emerging Technlogies, vol. 38, pp. 16–27, January 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

Z. Aretxabaleta, B. Pereda , B. López, "Analysis of the Effect of Al on the Static Softening of C-Mn Steels Using a Physically Based Model", Metallurgical and Materials Transactions A, vol. 45, issue 2 (2014), pp. 934-94.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

J. Arruabarrena, B. López, J.M. Rodriguez-Ibabe, "Influence of Prior Warm Deformation on Cementite Spheroidization Process in a Low-Alloy Medium Carbon Steel", Metallurgical and Materials Transactions A, vol. 45, issue 3 (2014), pp. 1470-1484.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

I. Merideño, F.J. Nieto, N. Gil-Negrete, A. Landaberea, J. Iartza, "Constrained layer damper modelling and performance evaluation for eliminating squeal noise in trams", Shock and Vibration, vol. 2014, article ID 473720, 11 pages, March 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

A. Cranny, A. Beriain, H. Solar, G. Tartarisco, G. Pioggia, "Vital Sign Sensing Technology", Chapter in Book "Systems Design for Remote Healthcare”, Editors: Koushik Maharatna, Silvio Bonfiglio, pp. 55-92, ISBN: 978-1-4614-8841-5 (Print) 978-1-4614-8842-2 (Online).

Publication type: Book Chapter.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

A. Zuzuarregui, M.C. Morant-Miñana, E. Perez-Lorenzo, G. Martínez de Tejada, S. Arana, M. Mujika, "Implementation and characterization of a fully miniaturized biosensor for in-situ endotoxin detection based on electrochemical techniques", IEEE Sensors Journal, vol. 14, no. 1, pp. 270-277, 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

N. Pereira, M. Mujika, S. Arana, T. Correia, A. M. T. Silva, H. T. Gomes, P. J. Rodrigues, R. Lima, "The Effect of a Static Magnetic Field on the Flow of Iron Oxide Magnetic Nanoparticles Through Glass Capillaries", Springer Netherlands, vol. 12, pp. 181-196, 2014. Print ISBN 978-94-007-7768-2, Online ISBN 978-94-007-7769-9.

Publication type: Book Chapter.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

Jacobo Paredes, Sheila Becerro, Sergio Arana, "Label-free interdigitated microelectrode based biosensors for bacterial biofilm growth monitoring using Petri dishes", Journal of Microbiological Methods, vol. 100, pp. 77–83, May 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

J. Paredes, S. Becerro, S. Arana, "Comparison of real time impedance monitoring of bacterial biofilm cultures in different experimental setups mimicking real field environments", Sensors and Actuators B, vol. 195, pp. 667-676, 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

J. Paredes, M. Alonso, C. Schmidt, D. Valderas, B. Sedano, J. Legarda, F. Arizti, E. Gómez, A. Aguinaga, J. L. Del Pozo, S. Arana, "Smart central venous port for early detection of bacterial biofilm related infections", Biomedical Microdevices, 1-10, February 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

P. Fernández-Robredo, A. Sancho, S. Johnen, S. Recalde, N. Gama, G. Thumann, J. Groll, A. García-Layana, "Current Treatment Limitations in Age-Related Macular Degeneration and Future Approaches Based on Cell Therapy and Tissue Engineering", Journal of Ophthalmology, vol. 2014, Article ID 510285, 13 pages, 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

I. Pasciuto, S. Ausejo, J.T. Celigüeta, A. Suescun, A. Cazón, "A comparison between optimization-based human motion prediction methods: data-based, knowledge-based and hybrid approach", Structural and Multidisciplinary Optimization, vol. 49, n. 1, pp. 169-183, January 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

D. González, J. Alkorta, J.M. Martínez-Esnaola, J. Gil Sevillano, "Numerical analysis of the indentation size effect using a strain gradient crystal plasticity model", Computational Materials Science, vol. 82, pp. 314-319, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Luque, J. Aldazabal, I. Aldazabal, J. Gil-Sevillano, "Molecular Dynamics Study of the Mechanical Behaviour andFailure of Nanoporous bcc Iron", Anales de Mecánica de la Fractura 31, vol. 2014, pp. 63-67. ISSN: 0213-3725.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. Martín-Meizoso, J. Aldazabal, J.L. Pedrejón, S. Moreno, "Caracterización de la Zona Afectada por un Oxicorte", Anales de Mecánica de la Fractura 31, vol. 2014, pp. 595-600. ISSN: 0213-3725.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. Luque, J. Aldazabal, I. Aldazabal, J. Gil-Sevillano, "Molecular Dynamics Study of the Mechanical Behaviour andFailure of Nanoporous bcc Iron", XXXI Encuentro del Grupo Español de Fractura, San Lorenzo del Escorial (España), 2-4 abril 2014. Presentación oral.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Martín-Meizoso, J. Aldazabal, J.L. Pedrejón, S. Moreno, "Caracterización de la Zona Afectada por un Oxicorte", XXXI Encuentro del Grupo Español de Fractura, San Lorenzo del Escorial (España), 2-4 abril 2014. Presentación oral.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Sancho, J. Aldazabal, A. Rainer, E.M. de Juan-Pardo, "Tissue engineering: Computer Modeling, Biofabrication and Cell Behaviour", Editores: P.R. Fernandes y P.J. Bartolo, Springer, 2014, ISBN 978-94-007-7072-0.

Publication type: Book Chapter.

Research fields: Biomedical Engineering, Materials, Multiscale Mechanics of Materials, Tissue Engineering

J.M. Rodríguez Ibabe, "Metallurgical aspects of the flat rolling process", The Making, Shaping and Treating of Steels. Flat Products volume, AIST, ISBN: 978-1-935117-36-0, pp. 113-170, 2014.

Publication type: Book Chapter.

Research fields: Materials, Thermomechanical Treatments

N. Gonzalez, M.C. Revilla, B. López, J.M. Rodríguez Ibabe, "Microstructural Features Intervening in Hot Workability of Free Cutting Steels", Mater Sci Forum, vols. 783-786, pp. 777-782, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A. Iza-Mendia, I. Gutiérrez, "Microstructure-Mechanical Properties Relationships for Complex Microstructures in High Strength Steels", Mater Sci Forum, vols. 783-786, pp. 783-788, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

P. Ciáurriz, I. Díaz, J.J. Gil, "Stable Discrete-Time Impedances for Haptic Systems With Vibration Modes and Delay", IEEE Transactions on Control Systems Technology, vol. 22, no. 3, pp. 884-895, May 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

Download

J. González Prada, J. Viñolas, X. Carrera, "Gas damper: potential vehicle performance studied on a full-car model", International Journal of Vehicle Design, vol. 64, nos. 2/3/4, pp. 214-239, 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

Download

M. Aizpun, J. Vinolas, A. Alonso, "Using the stationary tests of the acceptance process of a rail vehicle to identify the vehicle model parameters", Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 228(4), pp. 408-421, 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

R.F. Lagos, A. San Emeterio, J. Vinolas, A. Alonso, M. Aizpun, "The Influence of Track Elasticity when travelling on a Railway Turnout", Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, Paper 208, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

M. Aizpun, A. Alonso, J. Vinolas, "A New Parameter Identification Method for Railway Vehicle Models Using Stationary Tests", Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, Paper 253, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

J. Giner, P. Vila, A. Alonso, L. Baeza, "A Study of the Falling Friction Effect on Contact Parameters Through Exact Contact Models", Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, Paper 1, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

A. Alonso, A. Guiral, J.G. Giménez, "Wheel Rail Contact: Theoretical and Experimental analysis", Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

I. Grossoni, Y. Bezin, A. Alonso , "Modelling Uneven Support at Railway Crossings using a Vehicle-track Coupling System", Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Y. Bezin, I. Grossoni, A. Alonso, "The Assessment of System Maintenance and Design Conditions on Railway Crossing Performance", Comunicación a Congreso. Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance, J. Pombo (ed.), Civil-Comp Press, Stirlingshire, Scotland. Ajaccio, Corsica (France), 8-11 April 2014.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

G. Echegaray, I. Herrera, I. Aguinaga, C. Buchart, D. Borro, "A Brain Surgery Simulator", IEEE Computer Graphics and Applications, vol. 34, no. 3, pp. 12-18, May/June 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Z. Aretxabaleta, B. Pereda, B. López, "Multipass hot deformation behaviour of high Al and Al-Nb steels", Materials Science and Engineering A, vol. 600, pp. 37-46, 2014.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A.M. Martínez, J. Echeberria, A. Di Loreto, M. Zanon, I. Rampin, "Joint development of copper-free low steel brake pads for light vehicles", Eurobrake 2014. Lille (Francia), 13-15 Mayo, 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Rampin, M. Zanon, J. Echeberria, A.M. Martínez, A. Di Loreto, "Development of copper-free low steel brake pads for passenger cars", 2014 World Congress on Powder Metallurgy & Particulate Materials – PM2014. Orlando, Florida, USA, May 18–22 2014.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Pasciuto, S. Ausejo, J.T. Celigüeta, Á. Suescun, A. Cazón, "A hybrid dynamic motion prediction method for multibody digital human models based on a motion database and motion knowledge", Multibody System Dynamics, vol. 32 , no. 1, pp. 27-53, June 2014.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

Alberto Elosegui-Artola, Elsa Bazellières, Michael D. Allen, Ion Andreu, Roger Oria, Raimon Sunyer, Jenniefer J. Gomm, John F. Marshall, J. Louise Jones, Xavier Trepat, Pere Roca-Cusachs, "Rigidity sensing and adaptation through regulation of integrin types", Nature Materials, vol. 13, pp. 631-637, 2014.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Materials, Multiscale Mechanics of Materials, Tissue Engineering

Download

2013

Mikel Maiza, Sergio Beltrán, Klara Westling, Bengt Carlsson, Michela Mulas, Pär-Håkan Bergström, Suvi-Maaret Hyyryläinen, Gorka Urchegui, "DIAMOND: AdvanceD data management and InformAtics for the optimuM operatiON anD control of WWTPs", 11th IWA conference on instrumentation control and automation (ICA2013), 18-20 September, Narbonne, France, 2013.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

F. de las Cuevas, M. Reis, A. Ferraiuolo, G. Pratolongo, L.P. Karjalainen, J. Alkorta, J. Gil Sevillano, "Estructura y comportamiento mecánico de un acero TWIP: Relación de Hall-Petch", Remetallica, no. 19, pp. 17-22, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

M. Rieth, S.L. Dudarev, S.M. Gonzalez de Vicente, J. Aktaa, T. Ahlgren, S. Antusch, D.E.J. Armstrong, M. Balden, N. Baluc, M.-F. Barthe, W.W. Basuki, M. Battabyal, C.S. Becquart, D. Blagoeva, H. Boldyryeva, J. Brinkmann, M. Celino, L. Ciupinski, J. B. Correia, A. De Backer, C. Domain, E. Gaganidze, C. García-Rosales et al., "A brief summary of the progress on the EFDA tungsten materials program", Journal of Nuclear Materials, vol. 442, no. 1-3, suplement 1, pp. S173-S180, November 2013.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

C. García-Rosales, P. López-Ruiz, S. Alvarez-Martín, A. Calvo, N. Ordás, F. Koch, J. Brinkmann, "Oxidation behaviour of bulk W-Cr-Ti alloys prepared by mechanical alloying and HIPing", Proceedings of the 11th International Symposium on Fusion Nuclear Technology-11 (ISFNT-11) Barcelona, Spain, 15-20 September, 2013.

Publication type: Conference Proceedings.

Research fields: Materials, Multiscale Mechanics of Materials

X. Insausti, P.M. Crespo, B. Beferull-Lozano, "In-network computation of the transmition matrix for distributed subspace projection", IEEE Information Theory Workshop, September 9-13, 2013 Sevilla, Spain.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Mikel Hernaez, Iker Alustiza, Pedro M. Crespo, Javier Del Ser, "A decode-and-forward Scheme for multihop wireless networks", IEEE Vehicular Technology Conference, 2013 IEEE 78th, Las Vegas (USA), 2-5 september, 2013. ISSN 1090-3038.

Publication type: Conference Proceedings.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Ana Sancho, Lexuri Vázquez, Elena M De-Juan-Pardo, "Effect of cold storage on collagen-based hydrogels for the three-dimensional culture of adipose-derived stem cells", European Society of Biomaterials (ESB), Madrid, Spain. September 2013. Poster.

Publication type: Conference Proceedings.

Research fields: Biomedical Engineering, Tissue Engineering

N. Remírez de Esparza, N. Cocera, L. Vázquez, I. Ocaña , J.M. Sánchez, "Microstructure and oxidation behaviour of highly porous ceramic matrix composites: Lox M vs. ZM SiC grades", Conferencia invitada en 13th. Int. Conf. of the European Ceramic Society, 23-27 June 2013, Limoges, France.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

J. Abelleira, J. Sánchez-Oneto, J.R. Portela, S.I. Pérez-Elvra, R.Muñoz, R. Lebrero, T. Fernández, M. Esteban-Gutiérrez, M. Garrido-Baserba,T. Lotti, E. Martínez de la Ossa, E. Nebot, "High pressure processes integration for the treatment of sewage sludge", Innovative technologies for the XXI century Wastewater treatment plant and future perspectives. Santander, Spain, May 9-10, 2013.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Sludge and Solid Wastes

Bjorn Olav Hogstad, Carlos A. Gutiérrez, Matthias Patzold, Pedro M. Crespo, "Classes of sum-of-cisoids processes and their statistics for the modelling and simulation of mobile fading channels", Eurasip Journal on Wireless Communications and Networking.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

L. Llanos, B. Pereda, D. Jorge-Badiola, J.M. Rodriguez Ibabe, B. López, "Study of recrystallization in high manganese steels be means of the EBSD technique", Materials Science Forum, 2013, vol. 753, pp. 443-448.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

I. Gutiérrez, A. Iza-Mendia, "Relaciones microestructura-comportamiento mecánico en un acero microaleado con Nb", XIII Congreso Nacional de Tratamientos Térmicos y de Superficie: Tratermat 2013, Eds. J.M. Prado, M.D. Riera, CTM, Barcelona 22-24 Abril 2013. pp. 178-189.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Castro-Hurtado, N. Pérez, T. Tavera, P. Yurrita, G. Gª Mandayo, E. Castaño, "Structural and optical properties of WO3 sputtered thin films nanostructured by laser interference lithography", Applied Surface Science, vol. 276, pp. 229-235 (2013).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Gonzalez-Chavarri, I. Castro-Hurtado, G. G. Mandayo, E. Castaño, "Benzene sensor based on in-situ grown ZnO nanostructures", EUROMAT 2013, Sevilla 8-13 Sept.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

L. Rojo, G.G Mandayo, E. Castaño, "Thin film YSZ solid state electrolyte characterization performed by electrochemical impedance spectroscopy", EGATEK 2013/5th GERG Academic Network Event.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

L.Rojo, G.G Mandayo, E. Castaño, A.M. Gutierrez, J. M. Arraibi, "Zirconium electrolyte optimization of a thin film electrochemical sensor for the measurement of biogas and natural gas quality", EGATEK 2013/5th GERG Academic Network Event.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

T. Tavera, N. Pérez, A. Rodriguez, S. M. Olaizola , "Photoresist analysis for submicrometric material processing with laser interference lithography", EOSMOC 2013, laser world of photonics, Munich 13-15 Myo 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Rodríguez, M- C. Morant-Miñana, A. Arriola, S. M. Olaizola, "Femtosecond Laser Induced Periodic Surface Nanostructuring of Platinum Thin Films", ImagineNano 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Rezola, J. Pey, L.F. Figueiredo, A. Podhorski, S. Schuster, A. Rubio, F.J. Planes, "Selection of human tissue-specific elementary flux modes using gene expression data", Bioinformatics 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

A. Danilewsky, J. Wittge, K. Kiefl, D. Allen, P. McNally, J. Garagorri, M.R. Elizalde, T. Baumbach, B.K. Tanner, "Crack propagation and fracture in silicon wafers under thermal stress", Journal of Applied Cristallography, Vol 46, Part 4 (2013).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

I. Machado, J.A. Teixeira, S. Rodríguez-Couto, "Semi-solid-state fermentation: a promising alternative for neomycin production by the actinomycete Streptomyces fradiae", Journal of Biotechnology 165: 195-200 (2013).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Eneko Azaceta, Jesus Idigoras, Jon Echeberria, Arnost Zukal, Ladislav Kavan, Oscar Miguel, Hans-Jurgen Grande, Juan Antonio Anta, Ramon Tena-Zaera, "ZnO ionic liquid hybrid films: electrochemical synthesis and application in dye-sensitized solar cells", Journal of Materials Chemistry A, vol 1. pp. 10173-10183, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

E. Guillén, E. Azaceta, A. Vega-Poot, J. Idígoras, J. Echeberría, J.A. Anta, R. Tena-Zaera, "ZnO/ZnO Core−Shell Nanowire Array Electrodes: Blocking of Recombination and Impressive Enhancement of Photovoltage in Dye-Sensitized Solar Cells", The Journal Of Physical Chemistry C, 2013, 117(26), pp 13365-13373.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

P. López-Ruiz, N. Ordás, I. Iturriza, M. Walter, E. Gaganidze, S. Lindig, F. Koch, C. García-Rosales, "Powder metallurgical processing of self-passivating tungsten alloys for fusion first wall application", Journal of Nuclear Materials, vol. 442, no. 1-3, pp. S219–S224, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

P. Sathiskumar, K. Balan, T. Palvannan, S. Kamala-Kannan, B.-T. Oh, S. Rodríguez-Couto, "Efficiency of Pleurotus florida laccase on decolorization and detoxification of the Reactive dye Remazol Brilliant Blue R (RBBR) under optimized conditions", Clean-Soil Air Water, vol. 41, vol. 7, pp. 665-672, 2013.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

O. Benzina, D. Daassi, H. Zouari-Mechichi, F. Frikha, S. Woodward, L. Belbahri, S. Rodríguez-Couto, T. Mechichi, "Decolourization and detoxification of two textile industry effluents by the laccase-1-hydroxybenzotriazol system", Environmental Science and Pollution Research, vol. 20, no. 8, pp. 5177-5187, 2013.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

B. Sedano, A.R. Ruddle, I. Unanue, L. Low, D. Astigarraga, I. Ibarra, I. Cerro, A. Galarza, "HEMIS: Electrical Powertrain Health Monitoring for Increased Safety of FEVs", 2013 Prognostics and System Health Management Conference 8-11 September, Milan (Italy).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

A. R. Ruddle, A. Galarza, B. Sedano, I. Unanue, I. Ibarra , L. Low, "Safety and failure analysis of electrical powertrain for fully electric vehicles and the development of a prognostic health monitoring system", HEVC 2013, Hybrid & Electric Vehicle Conference, 6-7 November 2013, Hatfields, London (UK).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

A. de la Sota, S. Beltrán, E. Ayesa, "Optimización por simulación de estrategais de operación para la EDAR de Galindo ", XXXII Jornadas Técnicas AEAS, 12-14 de junio, Donostia-San Sebastian, España (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

F.M. Ibañez, J.M. Echeverria, L. Fontan, "Novel technique for bidirectional series-resistant DC/DC converter in discontinuous mode", Power Electronics, IET, vol. 6, no 5, May 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

I. Lizarralde, T. Fernández, E. Ayesa, P. Grau, "Incorporating water chemistry into the Extended Plant Wide Model (E-PWM)", In proceedings of the Novedar young water researchers workshop. Innovative technologies for the XXI century Wastewater treatment plant and future perspectives. Santander, Spain, May 9-10. (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Fernández-Arévalo, T., Lizarralde, I., Grau, P., Ayesa, E, "Extended Plant-Wide Modelling: New methodology for analysing innovative plant layouts", In proceedings of the Novedar young water researchers workshop. Innovative technologies for the XXI century Wastewater treatment plant and future perspectives. Santander, Spain, May 9-10. (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

S. Astals, M. Esteban-Gutiérrez, T. Fernández-Arévalo, E. Aymerich, J.L. García-Heras, J. Mata-Álvarez, "Anaerobic digestion of sewage sludge: a biodegradability and modelling study", Innovative technologies for the XXI century Wastewater treatment plant and future perspectives. Santander, Spain, May 9-10. (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Sludge and Solid Wastes

A. Sañudo, A. Alonso, J. Nieto, N. Gil-Negrete, "A methodology for the linearization of rubber models subjected to random excitation for frequency domain simulations", Constitutive Models for Rubber VIII- N. Gil-Negrete, A. Alonso (eds.), CRC Press, chapter: Design and applications, pp. 595-600 (2013). ISBN: 978-1-138-00072-8. San Sebastián (Spain), June 25-28, 2013.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

H. Álvarez, D. Borro, "Junction assisted 3D pose retrieval of untextured 3D models in monocular images", Computer Vision and Image Understanding, Vol. 117, No. 10, pp. 1204-1214. October 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

Download

I. Irizar, S. Beltrán, G. Urchegui, G. Izko, O. Fernández, M. Maiza, "Lessons learnt from the application of advanced controllers in the Mekolalde WWTP: good simulation practices in control", 11th IWA conference on instrumentation control and automation (ICA2013), 18-20 September, Narbonne, France, (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

J.V. Odriozola, S. Beltrán, L. Sancho, M. Dalmau, J. Comas, I. Rodríguez-Roda, E. Ayesa, "Model-based optimisation of MBR plants for C and N removal", 11th IWA conference on instrumentation control and automation (ICA2013), 18-20 September, Narbonne, France, (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

S. Beltrán, J.V. Odriozola, L. Sancho, E. Ayesa, "On-line estimation of membrane fouling in MBRs", 11th IWA conference on instrumentation control and automation (ICA2013), 18-20 September, Narbonne, France, (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, New Advanced Technologies for Wastewater Treatment

Z. Aretxabaleta, B. Pereda, S.V. Parker, B. López, "Softening Kinetics in High Al and High Al-Nb Microalloyed Steels", Materials Science Forum 2013, Vol. 762, pp. 140-145, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

L. Llanos, B. Pereda, G. Paul, B. López, "Physical Modelling of the Interaction between Softening and Nb (C,N) Strain-Induced Precipitation in High-Mn Steels", Materials Science Forum 2013, Vol. 762 (2013) pp 298-404.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

S. Beltrán, A. de la Sota, J. M. Villanueva, E. Ayesa, "Model-based optimization of aeration systems in WWTPs", 11th IWA conference on instrumentation control and automation (ICA2013), 18-20 September, Narbonne, France. (2013).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

A. Sañudo, J. Nieto, J. Pérez, A. Alonso, "High frequency modelling and validation of railway dampers", International Journal of Heavy Vehicle Systems, vol. 20, no. 4, pp. 312-326, 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

S. Rodríguez-Couto, "Treatment of textile wastewater by white-rot fungi: still a far away reality", Textiles and Light Industrial Science and Technology 2: 113-119.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

L. Gioia, C. Manta, K. Ovsejevi, J. Burgueño, P. Menéndez, S. Rodríguez-Couto, "Decolouration of different synthetic dyes with the optimised culture broth of a Uruguayan isolated strain of Pycnoporus sanguineus", Journal of Hazardous Material. (2012-Submitted).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Y.J. Lee, G.M. Kim, "Tunable electrospun scaffolds on cell behaviour for tissue regeneration and drug delivery system", OA Tissue Engineering 2013 May 01;1(1):5. Review Paper.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

G.M. Kim, K.H. Trang Le, S.M. Giannitelli, Y.J. Lee, A. Rainer, M. Trombetta, "Electrospinning of PCL/PVP blends for tissue engineering scaffolds", Journal of Materials Science-Materials in Medicine, vol. 24, pp. 1425–1442, 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

Y.J. Lee, A. Elosegui-Artola, K.H. Trang Le, G.M. Kim, "Morphological Cues for Regulation of Cell Adhesion and Motility with Tailored Electrospun Scaffolds of PCL and PCL/PVP Blends", Cellular and Molecular Bioengineering 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

I. Herrera, "Volumetric Visualization Techniques of Rigid and Deformable Models for Surgery Simulation", PhD Thesis Dissertation in October 2013. Ed. Universidad de Navarra (October 2013).

Publication type: Book.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

C. Martínez, S. Ordóñez, D. Guzmán, D. Serafini, I. Iturriza, O. Bustos, "Phase evolution and thermal stability of 2Mg-Cu alloys processed by mechanical alloying", Journal of Alloys and Compounds, 581, pp. 214-245, 25 December 2013.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Federico Ibanez, Jose Martín Echeverria, Luis Fontan, "Novel technique for bidirectional series-resonant DC/DC converter in discontinuous mode", IET Power Electronics, vol. 6, no. 5, pp. 1019-1028, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

I.Castro-Hurtado, G.Gª Mandayo, E.Castaño, "New strategies to enhance gas sensing properties of conductometric formaldehyde gas sensors. A review:from conventional films to nanostructured materials", Thin Solid Films.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Zuzuarregui , S. Arana, E. Pérez-Lorenzo, S. Sánchez-Gómez, G. Martínez de Tejada, M. Mujika, "Novel fully-integrated biosensor for endotoxin detection via polymyxin B immobilization onto gold electrodes", Journal of Sensors and Sensor Systems, vol. 2, pp. 157-164, 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

J. Albizuri, P. Grau, L. Larrea, "Validating the colloid model to optimize the design and operation of both MBBR and IFAS systems", International Conference in Biofilm Reactors, Paris, May 2013. (2012-Submitted).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

G.García-Mandayo, J. Herrán, "Solid State gas sensors for carbon dioxide detection", Chapter 16 in the book: Solid State gas sensors for carbon dioxide detection ,Semiconductor gas sensors, Woodhead Publishing Limited.

Publication type: Book Chapter.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

R. Zubialde, P. Uranga, B. López , J.M. Rodriguez-Ibabe, "Heterogeneity and Microstructural Features Intervening in the Ductile-Brittle Transition of Ferrite-Pearlite Steels", Materials Science and Technology (MS&T) 2013, October 27-31, 2013, Montreal, Quebec, Canada, pp. 313-320.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Castro-Hurtado, G. Gª Mandayo, E. Castaño, "Conductometric formaldehyde gas sensors. A review: from conventional films to nanostructured material", Thin Solid Films, vol. 548, pp. 665-676, 2013.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Gutierrez-Gutierrez, P.M. Crespo, "Asymptotically equivalent sequences of matrices and relative entropy", IEEE Information Theory Workshop, September 9-13, 2013 Sevilla, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Jesús Gutiérrez-Gutiérrez, "Singular value decomposition for comb filter matrices", Applied Mathematics and Computation, vol. 222, pp. 472-477, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

A. Martín-Meizoso, J.M. Martínez-Esnaola, A. Bergara, S. Falconer, "Fatigue crack growth on heterogeneous stress fields: best analythical approach", 2013 Materials Research Society (MRS) Fall Meeting, Boston, Massachusettes, EEUU, 1-6 december 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

F.M. Ibáñez, J. Vadillo, J.M.Echeverria, L.Fontán, "100kW bidirectional DC/DC Converter for a supercapacitor stack", IEEE Innovative Smart Grid Technology Europe 2013(ISGT).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

F.M. Ibáñez, J. Vadillo, J.M.Echeverria, L.Fontán, "Design Methodology of a balancing network for supercapacitors", IEEE Innovative Smart Grid Technology Europe 2013(ISGT).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

P. Ciáurriz, I. Díaz, J.J. Gil, "Bimanual Drive-By-Wire System with Haptic Feedback", 12th IEEE International Symposium on Haptic Audio-Visual Environments and Games (HAVE), Istambul, Turkey, pp. 18-23, October 26-27, 2013.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

M. Alonso-Arce, P. Bustamante, G. Solas, J. Añorga, "A 169 MHz Wireless M-BUS Based Advanced Meter Infrastructure for Smart Metering", The 7th International Conference on Sensor Technologies and Applications (SENSORCOMM 2013), pp. 33-37, ISBN: 978-1-61208-296-7, Barcelona, Agosto 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

M. Alonso-Arce, J. Legarda, B. Sedano, P. Bustamante, "Ultra Low-Power Smart Medical Sensor Node for In-Body Biomonitoring", IEEE 15th International Conference on e-Health Networking, Applications and Services (Healthcom 2013), pp. 465-470, ISBN: 978-1-4673-5800-2/13, Lisboa, October 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

M. Alonso-Arce, J. Legarda, B. Sedano, P. Bustamante, "A Novel Smart Central Venous Catheter (sCVC) for Electrical Bioimpedances Monitoring", Design Proceedings of the XXVIII Conference on the Design of Circuits and Integrated Systems (DCIS 2013), pp. 202-207, ISBN: 978-84-8081-401-0, Donostia-San Sebastián, Noviembre 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

P. Bustamante, M.Alonso-Arce, S. Arrizabalaga, B. Sedano, "An Advanced Meter Infrastructure Proof-of-Concept based on 169 MHz communications", Design Proceedings of the XXVIII Conference on the Design of Circuits and Integrated Systems (DCIS 2013), pp. 398-402, ISBN: 978-84-8081-401-0, Donostia-San Sebastián, Noviembre 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

P. Bretos, J. Goya, N. Merino, J. Añorga, M. Alonso-Arce,S. Arrizabalaga, "Embedded System Remote Management in Home Network using CWMP", Design Proceedings of the XXVIII Conference on the Design of Circuits and Integrated Systems (DCIS 2013), pp. 461-466, ISBN: 978-84-8081-401-0, Donostia-San Sebastián, Noviembre 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

M. Isasa, N. Pérez, T. Tavera, M. Trueba, J. Alkorta, J. Gil Sevillano, "Nanoporous gold periodical linear patterns obtained by laser interference thermal treatment", Thin Solid Films, vol 548, pp. 69-74, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Microelectronics & Microsystems, Multiscale Mechanics of Materials, Optoelectronic Microsystems

Download

I. Mesa, E. Sánchez, J. Díaz, C. Toro, A. Artetxe, M. Graña, F. Guijarro, C. Martínez, J.M. Jiménez, J.A. Alarcón, A. De Mauro, "GoCardio – A novel approach for mobility in cardiac monitoring", InMed Conference, Conference Venue, University of Piraeus 80, Karaoli & Dimitriou St. 185 34 Piraeus GREECE, 18-19 July 2013. Special Edition on Innovation in Medicine and Healthcare, vol. 6, no. 1, pp. 110-120: imed13-010.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

C. García-Rosales, P. López-Ruiz, A. Calvo, S. Alvarez-Martín, N. Ordás, F. Koch, J. Brinkmann, "Oxidation behavior of bulk W-Cr-Ti alloys prepared by mechanical alloying and HIPing", 11th International Symposium on Fusion Nuclear Technology (Barcelona, September 15-20, 2013).

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

Download

N. Ordás, A. Bereciartu, C. García Rosales, A. Moroño, M. Malo, E.R. Hodgson, J. Abellá, S. Colominas, L. Sedano, "Testing of porous SiC with dense coating under relevant conditions for Flow Channel Insert application", 11th International Symposium on Fusion Nuclear Technology (Barcelona, September 15-20, 2013).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

N. Galarza, D. de Miguel, N. Ordás, E. Moreno, I. Iturriza, B. Rubio, A. Gorrotxategi, P. Nation, J.M. Guillemary, F. Samaniego, "Quality evaluation of HIP joints using ultrasonic testing", 11thInternational Symposium on Fusion Nuclear Technology (Barcelona, September 16-20, 2013).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M. Trueba, N. Rodríguez, I. Iparraguirre, M.R. Elizalde, I. Ocaña, J.M. Sánchez, J.M. Martínez-Esnaola , "In-situ mechanical characterisation of WC-Co hardmetals using micro-beam testing", Poster. 18th Plansee Seminar 2013, 2-7 Junio, Reutte, Austria.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

I. Andreu, T. Luque, A. Sancho, B. Pelacho, F. Prósper, M.R. Elizalde, D. Navajas, "Local heterogeneous viscoelastic properties of healthy and infarcted heart extracellular matrix and its correlation with histology", 5th European Cell Mechanics Meeting (Cell Mech 2013).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J. Aldazabal, I. Aldazabal, "Computer Modelling of Atomic Movements/Diffusion on Oxide Dispersion Strengthened (ODS) Materials", Euromat 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J. Díaz, S. Arrizabalaga, P. Bustamante, I. Mesa, J. Añorga, J. Goya, "Towards Large-Scale Data Analysis: Challenges in the Design of Portable Systems and Use of Cloud Computing", Proceedings of the 10th International Conference on Wearable Micro and Nano Technologies for Personalized Health, Tallinn Stonia, 18-19 July. Edited by Berbd Blobel, Peter Pahrow and Lissa Parv. IOS Press, 2013, vol. 189, pp. 38-43, ISNN 0926-9630.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

I. Mesa, E. Sánchez, J. Díaz, C. Toro, A. Artetxe, M. Graña, F. Guijarro, C. Martínez, J.M. Jiménez, J.A. Alarcón, A. De Mauro, "GoCardio – A novel approach for mobility in cardiac monitoring", InMed: Innovation In Medicine and Healthcare, Piraeus, Grecia, 18-19 July 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

J. Paredes, A. Aguinaga, J.L. del Pozo, S. Arana, "Dielectric impedimetric detection method for bacterial biofilm cultures under different growth conditions", Biomedicacl Engineering Society (BMES) Annual Meeting, september 25-28, 2013 SeattleUSA.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

J. Paredes, S. Becerro, S. Arana, "Early Detection of biofilm-related infections by impedance monitoring in central venous port prototypes", Biomedical engineering Society (BMES) Annual Meeting, September 25-28, 2013 Seattle USA.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

I. Ocaña, M.R. Elizalde, M. Trueba, D. González, J.M. Martínez-Esnaola, M.T. Hernandez, D. Pantuso, M. Haverty, G. Xu, "Assessment of fracture and Elastoplastic properties of thin and very thin films", Nanoscale Multilayers Madrid 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

MR. Elizalde, M. Trueba, N. Rodríguez, I. Iparraguirre, D. González, I. Ocaña, JM. Martínez-Esnaola, JM. Sánchez-Moreno, "Small scale deformation, microbeams", Winterev 2013. Fracture, Fatigue and Damage Characterisation of Hard Materials - III.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

C.M. Moreno Téllez, J.M. Sánchez , O.F. Higuera Cobos, "Characterising ?-AlTiN coating and assessing its performance during Ti-6Al-4V milling", Ingeniería e Investigación, vol. 33, núm. 2, aug. 2013 (9-15). ISSN: 0120-5609.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

P. López-Ruiz, N. Ordás, I. Iturriza, M. Walter, F. Koch , C. García-Rosales, "Manufacturing and oxidation behavior of bulk self-passivating tungsten-based alloys", ISFNT-11, 16-20 September, 2013. Barcelona, Spain. Poster.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J. M. Sánchez*, M. Aristizabal, M. Arizmendi, J. Fernandez, F. Ibarreta, R. Martinez, "Sinterability, Microstructure and Tribological Behaviour of WC-Ni-Co-Cr Hardmetals", Poster. 18th Plansee Seminar 2013, 2-7 Junio, Reutte, Austria..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Iparraguirre, N. Rodríguez, F. Ibarreta, R. Martínez , J.M. Sánchez, "Precipitation of M7C3 carbides during sintering of TiCN-WC-Ni-Co-Cr Alloys Used in Hot Rolling Applications", Presentación oral. 18th Plansee Seminar 2013, 2-7 Junio, Reutte, Austria..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Betzwar Kotas, B.Weiss, H. Danninger, J. Sanchez, K. Mingard, "Fatigue Testing of Hardmetals in the Gigacycle Range", Presentación oral. 18th Plansee Seminar 2013, 2-7 Junio, Reutte, Austria..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J.M. Sánchez, I. Iparraguirre, N. Rodríguez, "Parallel beam glancing X-ray diffraction (PBG-XRD): a new technique for measuring surface residual stresses in coated hardmetals", Poster. 18th Plansee Seminar 2013, 2-7 Junio, Reutte, Austria..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Iparraguirre, N. Rodríguez , J.M. Sánchez, "Microstructure and abrasive wear resistance of TiC-WC-Co-Ni-Cr cermets obtained by liquid phase sintering", presentación oral .Euro PM2013 Congress to be held in Gothenburg, Sweden, 15-18 September 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Ortego, D. Valderas, "Potentials and comparisons between subtractive atching and injekt printing technology for the fabrication of NFC coil antennas", DCIS 2013 San Sebastian SPAIN, 25-27/11/2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

S. Beltrán, I. Irizar, E. Ayesa, "Data Manager – Simulator for the Galindo WWTP", Seminario final del proyecto NOVEDAR_Consolider: “Concepción de la EDAR del siglo XXI” Implementación de tecnologías innovadoras para el tratamiento de aguas residuales y lodos de depuradora. 14 November, Madrid, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

J.M. Sánchez, "Herramientas de corte: estado del arte y del mercado", Conferencia Invitada: 19 CMH. Congreso de Máquinas-Herramienta y Tecnologías de Fabricación, AFM-INVEMA. Asociación Española de Fabricantes de Herramientas, 12-14 Junio, 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

N. Ordás, N. Galarza, E. Moreno, P. Nation, I. Iturriza, C. García-Rosales, J.M. Guilemary, F. Samaniego, "Charazterization of HIP joints for ITER first wall involving SS, Cu, CuCrZr and Be", 11thInternational Symposium on Fusion Nuclear Technology (Barcelona, September 16-20, 2013).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

F. Castro, A. Veiga, S. Sainz, E. Urionabarrenetxea, D. Jorge, "Influence of sintering cycle and chemical composition on the amount of martensite obtained after cooling of PM nickel steels", European Congress and Exhibition on Powder Metallurgy, Göteborg, Sweden (2013).

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Veiga, S. Sainz, E. Hryha, L. Nyborg , F. Castro, "Controlled densification of low alloy PM steels during sintering ", EuroPM2013, Special Interest Seminar, Sept. 2013, Göteburg, Sweden.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Martin-Villate, J.M. Echeverria, J.P. Fossati, J. Vadillo, "Modeling and Simulation of Hierarchical Control for AC Inductive Microgrids", ICREPQ’13 20-22 de marzo de 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

L. Fontán, A. Martín Villate, J. P. Fossati, A. Galarza, L. Galo, I. Cerro, L. Arrizubieta, "Control Jerárquico/Distribuido y Sistema de Comunicaciones de la Micorred i-Sare", Microrredes con Generación Distribuida de Renovables (MIGEDIR).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

E. Rodriguez, N. Raj Karki, D. Galar, D. Valderas, S. Niska, "Fault detection of Railway EMC problems using MATLAB models", CM 2013 and MFPT 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 18-20 June 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

S. Azpiazu, G. de Miguel, J. Goya, G. Solas, S. Arrizabalaga, J. Mendizabal, "GPS and EGNOS positioning and integrity determination algorithm for on-board railway applications", DCIS 2013: Design of Circuits and Integrated Systems , San Sebastian (SPAIN) 25-27 november 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

F. Castro, S. Sainz, A. Veiga, "Comparing Prelloying and Master Alloy Approach for Obtaining Hardenable High Performance Low Alloy PM steels", EuroPM2013, Special Interest Seminar, Sept. 2013, Göteburg, Sweden.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Sesma, G. Sanchez, A. Rivas, S. Ávila-Sánchez, "A two-dimensional computational parametric analysis of the sheltering effect of fences on a railway vehicle standing on a bridge end experiencing crosswinds", Journal of Wind and Industrial Aerodynamics, Proceedings of the Institution of Mechanical Engineers - Part F: Journal of Rail and Rapid Transit.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

I. Díaz, J.J. Gil, M. Louredo, "Bone Drilling Methodology and Tool Based on Position Measurements", Computer Methods and Programs in Biomedicine, vol. 112 (2), pp. 284-292, November 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

Download

A. Alonso, A. Guiral, L. Baeza, S. Iwinicki, "Wheel-rail contact: experimental study of the creep forces-creepage relationships", 12th IAVSD 2013, 24th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks. Qingdao (China). August 19-23, 2013 .

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

J.A. Santamaría, J. Alkorta, J. Gil Sevillano, "Mechanical properties of PbTe Processed by HPT (High-pressure Torsion)", Materials Science & Technology 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J.A. Santamaría, J. Alkorta, J. Gil Sevillano, "Mechanical and thermal properties of PbTe processed by high-pressure torsion", Euromat 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M.A. Landeira Freire, J.C. Ramos, E. Sánchez, "Robot-Assisted Surgical Platform for Controlled Bone Drilling: Experiments on Temperature Monitoring for Assessment of Thermal Bone Necrosis", MEDICON 2013, XIII Mediterranean Conference on Medical and Biological Engineering and Computing. Sevilla (Spain). September 25-28, 2013.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

E. Aymerich, M. Esteban-Gutierrez, L. Sancho, "Analysis of the stability of high-solids anaerobic digestion of agro-industrial waste and sewage sludge", Bioresource Techonology Vol 144, September 2013, pp. 107-114.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

Download

A. Pan, A. Dias, A. Rodriguez, S.M. Olaizola, "Fast Fourier Analysis of Laser Induced Periodic Structures generated by femtosecond pulses in low carbon steel", OPTOEL 2013, Alcala de Henares, Madrid 10 -12 de Julio.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

N. Darwish, A. Arriola, P. Franco, J.J. Jaramillo, T. Tavera, S.M. Olaizola, M. Moreno, "Towards an Integrated Optical Biosensing Multiplatform", OPTOEL 2013, Alcala de Henares, Madrid 10 -12 de Julio.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

J. Gonzalez-Chavarri, I. Castro-Hurtado, G.G. Mandayo, E. Castaño, "Straightforward ZnO nanostructures fabrication for the measurement of toxic gases", 9th Spanish conference on electron devices, Valladolid 12-14 de Febrero 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

N. Jovanovic, S. Gross, A. Arriola, N. Charles, P. G. Tuthill, B. Norris, P. Stewart, J.S. Lawrence, M.J. Withford, "Improved performance characteristics for the integrated photonic pupil remapping interferometer Dragonfly", 9th Spanish conference on electron devices, Valladolid 12-14 de Febrero 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Arriola, S. Gross, N. Jovanovic, N. Charles, P.r G. Tuthill, S.M. Olaizola, A. Fuerbach, M.J. Withford, "Fabrication of ultra-low bend loss optical waveguides", CLEO Europe, Munich, Germany (2013).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Benavente-Babace, D. Gallego-Perez, S.J. Hansford, S. Arana, E. Perez-Lorenzo, M. Mujika, "A versatile microfabricated platform for single-cells studies", Medicon2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

M.Gomez, M. Mujika, S. Arana, D. Hansford, "Microchannel modification to enhance the sensitivity in biosensors", Medicon2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Rodriguez, M.C. Morant, A. Arriola, S.M. Olaizola, "Surface nanostructuring of Platinum thin films with ultrashot pluses", EUROMAT 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

U. Alvarado, A. Beriain, K. Granhaug, N. Andersen, D. Ramos-Valido, C. Luján-Martínez, G. Bistué, "A passive wake-up receiver for autonomous nodes in wireless sensor networks", Conference on Design of Circuits and Integrated Systems (DCIS), Nov. 2013, San Sebastián, Spain (ISBN 978-84-8081-401-0).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

D. Ramos-Valido, S.L. Khemchandani, C. Luján-Martínez, U. Alvarado, J. Del Pino, "Integrated 868 MHz low power detectors for wake-up receivers in 65nm CMOS technology", Conference on Design of Circuits and Integrated Systems (DCIS), Nov. 2013, San Sebastián, Spain (ISBN 978-84-8081-401-0).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

C. Luján-Martínez, A. Torralba, R. Carvajal, J. Ramírez-Angulo, U. Alvarado, J. Del Pino, "Combining bulk-driven and RC-coupling for ultra-low voltage analog design", Conference on Design of Circuits and Integrated Systems (DCIS), Nov. 2013, San Sebastián, Spain (ISBN 978-84-8081-401-0).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

A. Brazález, A. Bilbao, "Spanish pilot site. eCall for P2W", HeERO International Conference, 21.11.2013.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, ITS and Simulators

T. Schelenz, A. Suescun, M. Karlsson, L. Wikström, "Decision making algorithm for bus passenger simulation during the vehicle design process", Transport Policy, vol. 25, pp. 178-185, January 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

G. Vélez, L. Matey, A. Amundarain, A. Suescun, J.A. Marín, C. de Dios, "Modeling of Shotcrete Application for Use in a Real-Time Training Simulator", Computer-Aided Civil and Infrastructure Engineering, vol. 28, no. 6, pp. 465–480, July 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, ITS and Simulators

Download

E. Urionabarrenetxea, J.M. Martín, A. Rivas, I. Iturriza, F. Castro, "Experimental study and simulation of the gas flow in the atomisation chamber during close-coupled gas atomisation", Ponencia oral. International Powder Metallurgy Congress and Exhibition Euro PM2013 held in Gothenburg, Sweden, 15-18 September, 2013. Conference proceedings, vol. 2, pp. 257-262, EPMA, Shrewsbury, UK, (ISBN 978-1-899072-42-2), 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

D. Caballero, I. Zeberio, L. Fontán, M. Martínez-Iturralde, "A Calculation of the magnetic characteristics of surface mounted PMSMs under heavy load conditions considering the cross-magnetizing effect", International Review of Electrical Engineering (IREE), 2013, vol. 8, no. 4, pp. 1181-1188. August 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

J.B. González-Díaz, J.A. Arregi, A. Martínez-de-Guerenu, F. Arizti , A. Berger, "Quantitative magneto-optical characterization of diffusive reflected light from rough steel samples", Journal of Applied Physics, vol. 113, no. 15, pp. 153904, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

Download

M. Satrústegui, M. Martínez-Iturralde, A. Rivas, J.C. Ramos, "Algebraic model to predict the hydraulic behaviour of an open self ventilated electrical machine", International Review on Modelling and Simulations (IREMOS), vol. 6, no. 5, part A, pp. 1446-1451, october 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

J. Jiménez, J.A. Malumbres, I. Elósegui, M. Martínez-Iturralde, "Coupled electromagnetic and thermal design of miniaturized permanent magnet linear motors for sliding door applications", International Review on Electrical Engineering (IREE), vol. 8, no. 5, pp. 1416-1426, october 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

V. Deniau, H. Fridhi, M. Heddebaut, J. Rioult, J. Rodriguez, I. Adín, "Analysis and modelling of the EM interferences produced above a train associated to the contact between the catenary and the pantograph", EMC Europe 2013, Brugge, 2-6 Septiembre 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

H. Fridhi, V. Deniau, J.P. Ghys, M. Heddebaut, J. Rodriguez, I. Adín, "Analysis of the coupling path between transient EM interferences produced by the catenary-pantograph contact and on-board railway communication antennas", ICEAA 2013.Torino (Italy) 9-13, September.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

A. Bertelsen, J. Melo, E. Sánchez, D. Borro, "A review of surgical robots for spinal interventions", International Journal of Medical Robotics and Computer Assisted Surgery, vol. 9, no. 4, pp. 407-422. December 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

Jon Pey, Luis Tobalina, Joaquín Prada J de Cisneros, Francisco J Planes, "A network-based approach for predicting key enzymes explaining metabolite abundance alterations in a disease phenotype", BMC Systems Biology, vol. 7, no. 62.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

Jon Pey, Kaspar Valgepea, Angel Rubio, John E Beasley, Francisco J Planes, "Integrating gene and protein expression data with genome-scale metabolic networks to infer functional pathways", BMC Systems Biology , vol. 7, no. 134, 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

M. Dalmau, I. Rodríguez-Roda, E. Ayesa, J. Odriozola, L. Sancho, J. Comas, "Development of a decision tree for the integrated operation of nutrient removal MBRs based on simulation studies and expert knowledge", Chemical Engineering Journal 217 (1), 174-184 (2013).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

Download

E. Meabe, S. Déléris, S. Soroa, L. Sancho, "Performance of anaerobic membrane bioreactor for sewage sludge treatment: Mesophilic and thermophilic processes", Journal of Membrane Science, vol. 446, pp. 26-33, 2013.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

Download

S. Astals, M. Esteban-Gutiérrez, T. Fernández-Arévalo, E. Aymerich, J.L. García-Heras, J. Mata-Alvarez, "Anaerobic digestion of seven different sewage sludges: a biodegradability and modelling study", Water Research, vol. 47, no. 16, pp. 6033-6043, 2013.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

Download

D. Daassi, T. Mechichi, M. Nasri, S. Rodríguez-Couto, "Decolorization of the metal textile dye Lanaset Grey G by immobilized white-rot fungi", Journal of Environmental Management, vol. 129, pp. 324-332, 2013.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

B. Sedano, A. R. Ruddle, I. Unanue, L. Low, D. Astigarraga, I. Ibarra, I. Cerro , A. Galarza , "HEMIS: Electrical Powertrain Health Monitoring for Increased Safety of FEVs", Chemical Engineering Transactions, vol. 33, pp. 781-786, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

G.L. Frecassetti, A. Vargas, M.Leyh, J. F. Sevillano, I. Vélez, "On the design of an e-band link for the backhaul of future networks", Future Network & Mobile Summit 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

M. Turrillas, I. Vélez, J.F. Sevillano, A. Irizar, A. Cortés, "A radix 2^7 variable-length FFT for DVB-T/H receivers", Conference on Design of Circuits and Integrated Systems (DCIS), Nov. 2013, San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Martín-Villate, J. Vadillo, J.P. Fossati, L. Arrizubieta, I. Cerro, "AC Inductive Smart Grid Simulation Model", International Conference on Renewable Energies and Power Quality (ICREPQ’13). Bilbao (Spain), 20th to 22th March, 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

F. Raposo, R. Borja, J.A. Cacho, J. Mumme, K. Orupõld, S. Esteves, J. Noguerol-Arias, S. Picard, A. Nielfa, P. Scherer, I. Wierinck, E. Aymerich, C. Cavinato, D.C.Rodriguez, N. García-Mancha, P.N.T. Lens, V. Fernández-Cegrí, "First international comparative study of volatile fatty acids in aqueous samples by chromatographic techniques: evaluating sources of error ", Trends in Analytical Chemistry 51, 127-143 (2013).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Industrial Water Systems, Treatment and Management of Sludge and Solid Wastes

G. García Mandayo, J. González-Chavarri, I. Castro-Hurtado, E. Castaño, T. Geiling, M. Hoffmann, E. Hammes, P. Ryser, H. Knapp, R. Heslop, H. Jones, P. Fitzpatrick, R.Bell, "System to control indoor air quality in energy efficient buildings", COST Action TD1105 EuNetAir, International Meeting on New Sensing Technologies and Methods for Air-Pollution Monitoring, Copenaguen, Denmark, 3-4 October, 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J.M. Zambrano, M. Gil-Martínez, S. Nájera , I. Irizar, "Evaluation of a new control strategy for ATAD technology based on Quantitative Feedback Theory", 11th International IWA Conference on Instrumentation, Control and Automation - ICA 2013, Narbonn- France, September.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

A. Beriain , A. Jiménez, H. Solar , R. Berenguer, J.A. Montiel Nelson, J.M. Monzón-Verona, S. García-Alonso, J. Santana-Cabrera, "A very low power 8 bit MEMS pressure sensor suitable for batteryless RFID applications", Conference on Design of Circuits and Integrated Systems (DCIS), nov. 2013, San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

F.J. Planes, "Meta-Proteomics data analysis of a Napththalene degrading bacterial community based on Metabolic Networks", 5TH Congress of european Microbiologists, FEMS 2013, Leipzig, July 21-25, 2013.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Bioinformatics

M. Rieth, S.L. Dudarev, S.M. Gonzalez de Vicente, J. Aktaa, T. Ahlgren, S. Antusch, D.E.J. Armstrong, M. Balden, N. Baluc, M.-F. Barthe, W.W. Basuki, M. Battabyal, C.S. Becquart, D. Blagoeva, H. Boldyryeva, J. Brinkmann, M. Celino, L. Ciupinski et al., "Recent progress in research on tungsten materials for nuclear fusion applications in Europe", Journal of Nuclear Materials 432 (2013) 482–500.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Alberdi, N. Gil-Negrete, L. Kari, "Indirect energy flow measurement in magneto-sensitive vibration isolator systems", Applied Acoustics, vol.74, no. 4, pp. 575-584, April 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

Download

Marisol Gonzalez-Huarriz, Guillermo Aldave, Datta Ravi, Angel Rubio, Ricardo Diez-Valle, Miguel Marigil, Patricia Jauregi, Beatriz Vera, Arlet Acanda de la Rocha, Sonia Tejada-Solís, Marta M Alonso, "CELL BIOLOGY AND SIGNALING", In proceeding of: 4th Quadrennial Meeting of the World Federation of Neuro-Oncology held in conjunction with the 18th Annual Meeting of the Society for Neuro-Oncology, November 21-24, San Francisco, California, vol. 15, suppl. 3, CB-023.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Bioinformatics

Download

M. Trueba, N. Rodríguez, I. Iparraguirre, M.R. Elizalde, I. Ocaña, J.M. Sánchez, J.M. Martínez-Esnaola , "In-situ mechanical characterisation of WC-Co hardmetals using micro-beam testing", International Conference on Refractory Metals and Hard Materials, 18th Plansee Seminar 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

J. Palacio, A. Jorge-Peñas, A. Muñoz-Barrutia, C. Ortiz-de-Solorzano, E. de Juan-Pardo, J.M. García Aznar, "Numerical estimation of 3D mechanical forces exerted by cells on non-linear materials", Journal of Biomechanics, vol. 56, no. 1, pp. 50-55, January 2013.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

D. Jorge-Badiola, J.L. Lanzagorta, I. Gutiérrez, "Discussion on the microstructural transients during strain reversal based on the effective equivalent strain concept", Journal of Materials Science 48 (2013) pp 1480-1491.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A. Iza-Mendia, I. Gutiérrez, "Generalization of the existing relations between microstructure and yield stress from ferrite–pearlite to high strength steels", Materials Science and Engineering A Vol. 561 (2013) pp. 40–51.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

M.H. Bocanegra-Bernal, A. Aguilar-Elguézabal and J. Echeberria, "Carbon nanotubes (CNTs) and mechanical properties of Al2O3 and zirconia toughened alumina (ZTA) composites reinforced by them: A review", Recent Research Developments in Materials Science, vol. 9 (2012), pp. 45-116. Ed. S.G. Pandalai, Research Signpost.

Publication type: Book Chapter.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Bertelsen, "Planning and Registration Techniques for Image-Guided Robotic Spinal Surgery", PhD Thesis Dissertation in December 2012. Ed. Universidad de Navarra (January 2013), (ISBN 978-84-8081-342-6).

Publication type: Book.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

G. Echegaray, "Rigid and Deformable Collision Handling for a Haptic Neurosurgery Simulator", PhD Thesis Dissertation in December 2012. Ed. Universidad de Navarra (January 2013), (ISBN 978-84-8081-347-1).

Publication type: Book.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

A. Pradera, F. Jacobsen, C. Svendsen, A. Rivas, N. Gil-Negrete, "Practical Computational Aeroacoustics for Complex Confined Scattering Geometries in Low Mach Number Flows", Acta Acustica united with Acustica, vol. 99, pp. 130-138, 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

Download

A. Guiral, A. Alonso, L. Baeza, J.G. Giménez, "Non-steady state modelling of wheel-rail contact problem", Vehicle System Dynamics, vol. 59 (1), pp. 91-108, January 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

B. López, I. Gutiérrez, "Assessment of the methodologies used to determine softening and recrystallization kinetics by means of torsion tests", Materials Science and Engineering A Vol. 568 (2013) pp. 206-211.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

I. Gutiérrez, "Effect of microstructure on the impact toughness of Nb-microalloyed steel: Generalisation of existing relations from ferrite–pearlite to high strength microstructures", Materials Science and Engineering A Vol. 571 (2013) pp. 57-67.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

M. Aizpun, J. Vinolas, A. Alonso, "Using the stationary tests of the acceptance process of rail vehicle to identify the vehicle model parameters", Proceedings of the Institution of Mechanical Engineers - Part F: Journal of Rail and Rapid Transit.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

J. Aldazabal, J.L. Pedrejón, I. Ocaña, A. Martín-Meizoso, J.M. Martínez-Esnaola, "Estudio de la resistencia a fatiga y tenacidad de aceros templados de grano fino y ultrafino empleados para muelles", 30 Encuentro del Grupo Español de Fractura, 13-15/03/2013, Toledo Anales de Mecánica de la Fractura 30, Vol. (2013) 333-337. ISSN: 0213-3725.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Martín-Meizoso, J.M. Martínez-Esnaola, "Estimación del crecimiento de grieta por fatiga en una viga rectangular sometida a flexión con una grieta en un lateral", Anales de Mecánica de la Fractura 30, Vol. (2013) 229-234. ISSN: 0213-3725. 30 Encuentro del Grupo Español de Fractura, 13-15/03/2013, Toledo.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M. Trueba, N. Rodríguez, I. Iparraguirre, M.R. Elizalde, I. Ocaña, J.M. Sánchez Moreno, J.M. Martínez-Esnaola, "Caracterización in-situ de las propiedades mecánicas locales de metal duro mediante el ensayo de microvigas", Enviado a Anales de Mecánica de la Fractura 30, Vol. (2013) 507-512. ISSN: 0213-3725. 30 Encuentro del Grupo Español de Fractura, 13-15/03/2013, Toledo.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

G. Viteri, A. Garin, P. Slon, J. Etxano, G.A. Baquero, J. Pla, P. Domínguez, J.L. Zubieta, R. Garcia-Eulate, "Depression in elderly: a DTI study of white matter abnormalities with two control groups", Poster Proceedings of the European Congress of Radiology (ECR 2013), C-1378, DOI: 10.1594/ecr2013/C-1378. Viena, Austria. March 7-11, 2013.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

A. Alonso, N. Gil-Negrete, J. Nieto, J.G. Giménez, "Development of a rubber component model suitable for being implemented in railway dynamic simulation programs", Journal of Sound and Vibration, vol. 332, pp. 3032-3048, 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

Download

A. Alberdi-Munain, N. Gil-Negrete, L. Kari, "Modelling energy flow through magneto-sensitive vibration isolators", International Journal of Engineering Science, vol. 65, pp. 22-39, 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

Download

J. Gutiérrez-Gutiérrez, "Entries of continuous functions of large Hermitian tridiagonal 2-Toeplitz matrices", Linear Algebra and its Applications, vol. 439, pp. 34-54, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

J. Gutiérrez-Gutiérrez, "Binomial coefficients and powers of large tridiagonal matrices with constant diagonals", Applied Mathematics and Computation, vol. 219, no. 17, pp. 9219-9222, 2013 .

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

X. Insausti, F. Camaro, P.M. Crespo, B. Beferull-Lozano, J. Gutiérrez-Gutiérrez, "Distributed Pseudo-Gossip Algorithm and Finite-Length Computational Codes for Efficient In-Network Subspace Projection ", IEEE Journal of Selected Topics in Signal Processing, vol. 7, no. 2, pp. 163-174, April 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

I. Castro-Hurtado, C. Malagù, S. Morandi, N. Pérez, G. Gª Mandayo, E. Castaño, "Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres", Acta Materialia.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Paredes, S. Becerro, F. Arizti, A. Aguinaga, J. del Pozo, S. Arana, "Interdigitated microelectrode biosensor for bacterial biofilms growth monitoring by impedance spectroscopy technique in 96-well microtiter plates", Sensors & Actuators: B. Chemical.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

A. Mancisidor, C. Luno-Bilbao, N. Vielma, J.M. Sanchez, I. Iturriza, "Effect of sintering atmosphere on densification, mechanical properties and diamond stability of prealloyed diamond impregnated composites obtained by free sintering", Powder Metallurgy, vol. 56, no. 5, pp. 362-373, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

Alexander Arriola, Simon Gross, Nemanja Jovanovic, Ned Charles, Peter G. Tuthill, Santiago M. Olaizola, Alexander Fuerbach, Michael J.Withford, "Low bend loss waveguides enable compact, efficient 3D photonic chips", Optics Express, vol. 21, no. 3, pp. 2978-2986, 2013.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

A. Mancisidor, C. Luno-Bilbao, N. Vielma, J.M. Sanchez, I. Iturriza, "Effect of sintering atmosphere on densification, mechanical properties and diamond stability of prealloyed diamond impregnated composites obtained by free sintering", Proceeding of European Congress on Powder Metallurgy, EuroPM2013, (Congress & Exhibition), Gothenburg (Sweden), 15th-18th September, 2013. EPMA Keynote Paper Award.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Becerro, J. Paredes, S. Arana, "Interdigitated biosensor for multiparametric monitoring of bacterial biofilm development", ImagineNano 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Rodriguez, M.C. Morant, A. Arriola, S. M. Olaizola, "Femtosecond laser induced periodic surface nanostructuring of planetarium thin films", ImagineNano 2013.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

A. García de la Yedra, J.L. Pedrejón, A. Martín-Meizoso, "Thermo-mechanical fatigue tests on MarM-247 nickel-based superalloy using the direct resistance method", Materials at High Temperatures. Vol. 30, Issue 1 (April 2013) pp. 19-26. ISSN: 0960-3409.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

N. Isasti, D. Jorge-Badiola, M.L. Taheri, P. Uranga, "Phase Transformation Study in Nb-Mo Microalloyed Steels Using Dilatometry and EBSD Quantification", Metallurgical and Materials Transactions A, 2013. Vol. 44, no. 8, 2013, pp. 3552-3563.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

P. Uranga, I. Gutiérrez, B. López, "Determination of recrystallization kinetics from plane strain compression tests", Materials Science and Engineering A , Vol. 578 (2013) pp. 174-180.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

M. Hernaez, P.M. Crespo, J. del Ser, "Reliable and high QoS wireless communications over harsh environments", Journal of Telecommunications and Information Technology, 1, 2013, pp. 32-40.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

J. Seifert, F. Herbst, P. H. Nielsen, F.J. Planes, M. Ferrer, M. Bergen, "Bioinformatic progress and applications in metaproteogenomics for bridging the gap between genomic sequences and metabolic functions in microbical communities", Journal of Proteomics 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. Arruabarrena, P. Uranga, B. López, J.M. Rodriguez-Ibabe, "Mejora de la esferoidización de aceros de medio carbono mediante las aplicaciones en tibio de bajas deformaciones", XIII Congreso Nacional de Tratamientos Térmicos y de Superficie Tratermat 2013. Eds. J.M. Prado, M.D. Riera, CTM, Barcelona 22-24 Abril 2013. pp. 166-177.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

N. Isasti, B. Pereda, B. López, J.M. Rodriguez-Ibabe, P. Uranga, "Effects of combining Nb and Mo in HSLA Steels: From austenite conditioning to final microstructure", 2nd International Symposium on Mo and Nb Alloying in High Performance Steels, Metallurgy for More Sustainable Steels. Organized by CBMM and IMOA. Jeju Island, Korea, 24-26 April 2013. Ponencia Invitada.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

Carlos Casanueva, Asier Alonso, Ibon Eziolaza, José Germán Giménez, "Simple flexible wheelset model for low-frequency instability simulations", Proceedings of the Institution of Mechanical Engineers - Part F: Journal of Rail and Rapid Transit, vol. 228, no. 2, pp. 169-181, 2104.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

J. Alkorta, "Limits of simulation based high resolution EBSD", Ultramicroscopy, vol. 131, pp. 33-38, 2013.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

S. Wurster, N. Baluc, M. Battabyal, T. Crosby, J. Du, C. García-Rosales, A. Hasegawa, A. Hoffmann, A. Kimura, H. Kurishita, R.J. Kurtz, H. Li, S. Noh, J. Reiser, J. Riesch, M. Rieth, W. Setyawan, M. Walter, J.-H. You, R. Pippan, "Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials", Journal of Nuclear Materials 442 (2013) S181–S189.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Alonso, A. Guiral, J.G. Giménez, "Wheel Rail Contact: Theoretical and Experimental analysis", International Journal of Railway Technology, vol. 2, no. 4, pp. 15-32, 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

J. Pey, P. de Atauri, X. Aguirre, E. San José-Eneriz, C.M. Olabarri, A. Rezola, A. Rubio, F. Prosper, M. Cascante, F.J. Planes, "On the use of Flux Balance Analysis for drug target prediction in cancer", CASEIB2012: XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica. San Sebastian, Spain, November 19-21, 2012. Oral presentation.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Rezola, J. Pey, A. Rubio, F.J. Planes, "Interpreting high-throughput expression data of lung cancer subtypes in light of metabolic pathways", CASEIB2012: XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica. San Sebastian, Spain, November 19-21, 2012. Oral presentation.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

L. Tobalina, J. Pey, J. Prada, F.J. Planes, "Detecting key enzymes responsible for metabolite accumulation using carbon flux paths and connectivity curves", CASEIB2012: XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica. San Sebastian, Spain, November 19-21, 2012. Oral presentation.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

I. Alustiza, M. Hernaez, X. Insausti, P.M. Crespo, "Teaching information theory via a simulation tool for communications systems", IEEE Global Engineering Education Conference (EDUCON), pp. 138-145, March 13-15, 2013, Berlin, Germany.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

J. Bilbao, A. Calvo, I. Armendariz, P.M. Crespo, "Cooperative Network coding scheme for multimedia content distribution over noisy environments", IEEE International Symposium on Broadband Multimedia systems and broadcasting 2013, june 5-7, Brumel University, London, United Kingdom.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

M. Hernaez, P.M. Crespo, J. del Ser, "On the Design of a Novel Joint Network-Channel Coding Scheme for the Multiple Access Relay Channel", IEEE Journal on Selected Areas in Communications, vol. 31, no. 8, pp. 1368-1378, 2013.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

J.J. Gil, I. Díaz, P. Ciáurriz, M. Echeverría, "New driving control system with haptic feedback: design and preliminary validation tests", Transportation Research Part C: Emerging Technologies, vol. 33, pp. 22-36, Agosto 2013.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

Download

B. Pereda, B. López, J.M. Rodriguez Ibabe, "Role of Mo on static recrystallization kinetics in coarse grained Nb microalloyed steels", 5th Int. Conf. on Recrystallization and Grain Growth, Sydney (Australia), Materials Science Forum, 2013, vol. 753, pp. 453- 458. Ponencia invitada.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Jon Pey, Francisco J. Planes, John E. Beasley, "Refining Carbon Flux Paths using atomic trace data", Bioinformatics, vol. 30, no. 7, november 21, 2013, pp. 975-980.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

M. Presa, A. Iza-Mendia, "Experimental study of the processing window in stainless steels and Ni-based alloys by DSC", CALPHAD XLII International Conference on Computer Coupling of Phase Diagrams and Thermochemistry. San Sebastián 26-31 May 2013.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

2012

Petra Van Damme, Marta Lasa, Bogdan Polevoda, Cristina Gazquez, Alberto Elosegui-Artola, Duk Soo Kim, Elena De Juan-Pardo, kimberly Demeyer, Kristine Hole, Esther Larrea, Evy Timmerman, Jesús Prieto, Thomas Arnesen, Fred Sherman, Kris Gevaert, Rafael Aldabe, "N-terminal acetylome analyses and functional insights of the N-terminal acetyltransferase NatB", Proc. of the National Academy of Sciences of the United Sates of America, vol. 109, no. 31, pp. 12449-12454, Jul 31, 2012.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

Download

J.M. Rodríguez-Ibabe, P. Uranga, B. López, "Some aspects regarding microstructural heterogeneities during steel processing", Materials Science Forum Vols. 706-709 (2012) pp 157-164.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

A. Rezola, J. Pey, L.F. de Figueiredo, A. Podhorski, S. Schuster, A. Rubio, F.J. Planes, "Interpreting high-throughput expression data of human tissues in light of elementary flux modes", Metabolic Engineering (2012).

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

C. Klinkenberg, C. Bilgen, J.M. Rodríguez-Ibabe, B. Lopez, P. Uranga, "New Trends and Technologies in Thin-Slab Direct Rolling: Improved Microstructure & Mechanical Behavior", Materials Science Forum Vols. 706-709 (2012) pp 2760-2765.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

J. Gil Sevillano, F. de las Cuevas, "Internal stresses and the mechanism of work hardening in twinning-induced plasticity steels", Scripta Materialia.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

G. San-Vicente, I. Aguinaga, J.T. Celigüeta, "Cubical Mass-Spring Model design based on a tensile deformation test and nonlinear material model", IEEE Transactions on Visualization and Computer Graphics, Vol. 18, No. 2, pp. 228-241. February 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

M.J. Puerto, J.J. Gil Nobajas, H. Álvarez, E. Sánchez, "Influence of User and Grasping Position on Haptic Rendering", IEEE/ASME Transactions on Mechatronics, Vol. 17, No 1, pp. 174-182, February 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

A. Alberdi, N. Gil-Negrete, L. Kari, "Direct energy-flow measurement in magneto-sensitive vibration isolator systems", Journal of Sound and Vibration, vol. 331, pp. 1994-2006. April 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

A. Aguirre, A.Lozano-Rodero, M. Villamañe, B. Ferrero, L.Matey, "Olympus: An intelligent interactive learning platform for procedural tasks", Proceedings of the International Conference on Computer Graphics Theory and Applications (GRAPP 2012), pp. 543-550. Rome, Italy. February 24-26, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics

H. Álvarez, "Study of Augmented Reality Methods for Real Time Recognition and Tracking of Untextured 3D Models in Monocular Images", PhD Thesis Dissertation in December 2011. Ed. Universidad de Navarra, (January 2012), (ISBN 84-8081-154-4).

Publication type: Book.

Research fields: Applied Mechanics, Computer Graphics

Download

J. Hernantes, I. Díaz, D. Borro, J.J. Gil, "Effective Haptic Rendering Method for Complex Interactions", Chapter in the book: Haptics Rendering and Applications (ISBN 978-953-307-897-7), pp. 115-130. Ed. InTech, Rijeka, Croacia. January 2012..

Publication type: Book Chapter.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

J.M. Cabrero, C. Blanco, K.G. Gebremedhin, A. Martín-Meizoso, "Assessment of phenomenological failure criteria for wood", European Journal of Wood and Wood Products November 2012, Volume 70, Issue 6, pp 871-882. ISSN: 0018-3768 (print version); ISSN: 1436-736X (electronic version).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

T. Jauss, A.N .Danilewsky, J. Wittge, A. Cröll, J. Garagorri, M.R. Elizalde, D. Allen, P. McNally, "Influence of mechanical defects on the crystal lattice of silicon", Crystal Research and Technology 47 (3), 253-260 (2012).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

M. Aristizabal, L.C. Ardila, F. Veiga, M. Arizmendi, J. Fernández, J.M.Sánchez, "Comparison of the friction and wear behaviour of WC-Ni-Co-Cr and WC-Co hardmetals in contact with steel and high temperatures ", Wear 280-281 (2012) 15-21.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Bertelsen, D. Borro, "2D-3D Registration with Multiple Fixed Images", The Source, Ed. Kitware. January 2012 .

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

S. Rodríguez-Couto, "Laccases for Denim Bleaching: An Eco-Friendly Alternative", The Open Textile Journal, 5, 1-7 (2012).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

B. López y J.M. Rodriguez Ibabe, "Microstructure evolution in metal forming processes", "Chapter in the book: Recrystallisation and grain growth in hot working of steels, Editores J. Lin, D. Balint y M. Pietrzyk, Editorial: Woodhead Publishing Limited, UK , ISBN 978-0-85709-074-4, Pag: 67-113, 2012.

Publication type: Book Chapter.

Research fields: Materials, Thermomechanical Treatments

A. Martínez de Guerenu, K. Gurruchaga, F. Arizti, I. Gutiérrez, "Non-destructive magnetic techniques applied to the characterisation of microstructure, texture and mechanical properties in low carbon steels", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

M. X. Zambrano, A. Martínez-de-Guerenu, F. Arizti, "Inspección de cables de acero mediante técnicas de flujo magnético disperso", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

K. Gurruchaga, A. Martínez-de-Guerenu, F. Arizti, "Altzairuen mikroegitura eta textura karakterizatzeko teknika magnetiko ez-suntsitzaileak (Técnicas magnéticas no destructivas para caracterizar la microestructura y textura de aceros)", I Materialen Zientzia eta Teknologia Kongresua (1º Congreso de Ciencia y Tecnología de Materiales), Arrasate- Mondragón, España, 3-4 Mayo, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

J.A. Arregi, A. Martínez-de-Guerenu, O. Idigoras, J.B. González-Díaz, F. Arizti, A. Berger, "Elipsometria Magneto-Optiko Orokortua (GME) lagin magnetiko ez-lau eta zimurtsuetan (Generalized Magneto-optical Ellipsometry (GME) for magnetic samples with increased roughness)", I Materialen Zientzia eta Teknologia Kongresua (1º Congreso de Ciencia y Tecnología de Materiales), Arrasate- Mondragón, España, 3-4 Mayo, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

A. Baquero, J. Marin, A. Garin, D. Borro, M.R. García-Eulate, J. Pla, "Prevention of depression in elderly: factors in clinical research", Poster Proceedings of the American Association for Geriatric Psychiatry Annual Meeting (AAGP 2012), Vol. 20, No. 3, Supplement 1, pp. S65-S66 (ISSN: 1064-7481). Washington, DC, USA. March 16-19, 2012..

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

B. Fierz, J. Spillmann, I. Aguinaga , and M. Harders , "Maintaining Large Time Steps in Explicit Finite Element Simulations Using Shape Matching", IEEE Transactions on Visualization and Computer Graphics, Vol. 18, No. 5, pp. 717-728. May 2012..

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

C. Revilla Gómez, J.M. Rodríguez Ibabe, "Estudio de la Evolución del Daño Durante el Conformado en Caliente de Aceros Resulfurados", Anales de Mecánica de la Fractura 29, Vol I (2012) 177-182..

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

A. Lasaosa, A. Luque, J. Aldazabal, J.M. Martínez-Esnaola, J. Gil Sevillano, "Estudio Atomístico del Comportamiento a Fractura del Sistema Fe-Cr", Anales de Mecánica de la Fractura 29, Vol II (2012) 455-460.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Martín Meizoso, C. Blanco, "Análisis de Sensibilidad del Método de la Escalera para el Cálculo del Límite de Fatiga", Anales de Mecánica de la Fractura 29, Vol II (2012) 505-510.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

I. Ortego, N. Sanchez, J. Garcia, F. Casado, D. Valderas, J. I. Sancho, "Inkjet Printed Planar Coil Antenna Analysis for NFC Technology Applications", International Journal of Antenas and Propagation Volume 2012 (2012), Article ID 486565, 6 pages.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Embedded Systems and Networks

J. Pey , A. Rubio , C. Theodoropoulos , M. Cascante , F. J.Planes, "Integrating tracer-based metabolomics data and metabolic fluxis in a linear fashion via Elementary Carbon Modes ", Metabolic Engineering (2012).

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

R. Lagos, A. Alonso, J. Viñolas, X. Pérez, "Rail vehicle passing through a turnout: Analysis of differing turnout designs and wheel profiles", .

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

J. Garagorri, M. R. Elizalde, M. C. Fossati, D Jacques, B. K. Tanner, "Slip band distribution in rapid thermally annealed silicon wafers", .

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

J. Arruabarrena, P. Uranga, B. López, J.M. Rodríguez Ibabe, "Zementitaren esferoidizazio-zinetikak aleazio baxu eta karbono edukiera ertaineko altzairuetan: Transformazio osteko deformazioaren eragina", Materialen Zientzia eta Teknologiaren, I Kongresua, 3-4 mayo 2012, pp. 13-18, Arrasate.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

N. Isasti, D. Jorge-Badiola, P. Uranga, "Fase-transformazioaren analisia niobio eta niobio-molibdeno altzairu mikroaleatuetan", Materialen Zientzia eta Teknologiaren I. Kongresua, Arrasate, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. Uranga, B. López, J.M. Rodriguez Ibabe, "Mikroegitura-heterogeneotasunak altzairu mikroaleatuen prozesaketan", Materialen Zientzia eta Teknologiaren I. Kongresua, Arrasate, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A.Yunquera, D. Jorge-Badiola, A. Iza-Mendia, "Ale-mugen ingeniaritza altzairu herdoilgaitz austenitiko bati aplikatuta", Materialen Zientzia eta Teknologiaren I. Kongresua, Arrasate, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

J.M. Rodriguez Ibabe, "Metalurgiatik Materialen Zientziara: joan-etorriko bidaia", Materialen Zientzia eta Teknologiaren I. Kongresua, Arrasate, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Cortés, I. Vélez, M. Turrillas, J. F. Sevillano, "Fast Fourier Transform processors: Implementing FFT and IFFT cores for OFDM communication systems", Chapter in Book “Fourier Transform - Signal Processing”, Editorial INTECH. ISBN 978-953-51-0453-7.

Publication type: Book Chapter.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

Lizarralde, F. Claeys, R. Ordoñez, L. Sancho , P. Grau, "Water Network Cost Optimization in a Paper Mill Based on a New Library of Mathematical Models.", Water Science and Technology 65 (11), 1929-1938 (2012)..

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M.S. Roriz, S. Rodríguez-Couto, "White-Rot Fungi as Promising Bioremediation Agents", "Chapter in the book: Fungi: Types, Environmental Impact and Role in Disease. Arias Vázquez, M.S., Paz Silva, A. (eds.). Nova Science Publishers, Hauppauge, NY. (2012 - In Press).

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

I. Castro-Hurtado J. Herrán; G. Gª Mandayo; E. Castaño, "SnO2 -nanowires grown by catalytic oxidation of tin sputtered thin films for formaldehyde detection", Thin Solid Films 520 (2012) 4792-4796.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

N. Pérez, T. Tavera, A. Rodríguez, M.l Ellman, I. Ayerdi, S. M. Olaizola, "Fabrication of sub-micrometric metallic hollow-core structures by laser interference lithography", Applied Surface Science.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

I. Gurutzeaga, B. Sedano, A. Fabo, S. Fernández, "Geometrically optimum ultra wide band 180º hybrids", Microwave and Optical Technology Letters, Vol. 54, No. 4, April 2012, pp 909-914.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

F.M. Ibanez, J. Vadillo, J.M. Echeverria, A. Galarza, L. Fontán, "Design and implementation of a high-current test bech for batteries and supercapacitors characterization", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

R. Lach, G.M. Kim, R. Adhikari, G. H. Michler , W. Grellmann, "Indentation Methods for Characterising the Mechanical andFracture Behaviour of Polymer Nanocomposites", Indentation Methods for Characterising the Mechanical and Fracture Behaviour of Polymer Nanocomposites, Nepal Journal of Science and Technology Vol. 13, No. 2 (2012) 115-122.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Biorobotics and Surgical Simulation

K. Tomasena, L. Zamora-Carreras, M. Losada, M. Gams, J. F. Sevillano, I. Vélez, "Ubiquitous care system to support independent living", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Alonso, A. Irizar, A. Cortés, J.A. Paredes, M. Turrillas, "Hardware-in-the-loop based fast system verification", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. Mendizabal-Samper, S. Urcelayeta, J. M. Blanco, J. R. Martin, J. F. Sevillano, A. Cortes, "Fault injection and simulation for fault tolerant software", 5Oth Anniversary Conference - Engineering: Science and Technology, Donostia-San Sebastián, España, 31 Mayo - 1 Junio, 2013.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

M. Turrillas, I. Vélez, J. F. Sevillano, A. Irizar, A.C. Oria, "An Area–Efficient Radix 2^8 FFT Algorithm for DVB-T2 Receivers", DCIS 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Ferraiuolo, A. Smith, J. Gil-Sevillano, F. de las Cuevas, P. Karjalainen, G. Pratalongo, H. Gouveia, M. Mendes Rodrigues, "Metallurgical Design of high strength austenitic Fe-C-Mn Steels with excellent formability (Metaldesign)", ISBN 978-92-79-22205-4, European Union, 2012.

Publication type: Book.

Research fields: Materials, Multiscale Mechanics of Materials

Download

C. Buchart, A. Amundarain, D. Borro, "Hybrid GPU Local Delaunay Triangulation through Points Consolidation", Chapter in the book: 3-D Surface Geometry and Reconstruction: Developing Concepts and Applications (ISBN 978-1-4666-0113-0), pp. 91-113, Ed. IGI Global, Hershey, PA, USA. 2012.

Publication type: Book Chapter.

Research fields: Applied Mechanics, Computer Graphics

I. Adín, J. Mendizabal, J. del Portillo, "Impact of Electromagnetic Environment on Reliability Assessment for Railway Signalling Systems", "Chapter in the book : Railway Safety, Reliability, and Security.

Publication type: Book Chapter.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Villaro, J.Mendizábal Samper, J. Melendez, "Fault Injection for on-board ERTMS/ETCS Safety Assessment", "Chapter in the book: Railway Safety, Reliability, and Security.

Publication type: Book Chapter.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

I. Gutierrez, A. Iza-Mendia, "Les Aciers Inoxidables Duplex", «Les Aciers Inoxidables Duplex», Chapitre 1, Procédé : formabilité à chaud: Eds: I. Alvarez-Armas, S. Degallaix-Monreuil, Hermès/Lavoisier, France, 2012. ISBN: 9782746224575.

Publication type: Book Chapter.

Research fields: Materials, Thermomechanical Treatments

L. Matey, "Mixed Reality Applications for Industry", .

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

I. Mesa ,A. Rubio,J. Diaz, J. Legarda ,B. Sedano, "Reducing the Number of Channels and Signal-features for an Accurate Classification in an EMG Pattern Recognition Task", BIOSIGNALS 2012 - Proceedings of the International Conference on Bio-inspired Systems and Signal Processing, Vilamoura, Algarve, Portugal, 1-4 February, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J.Y-C. Liu, R. Berenguer and F. Chang , "Millimeter-Wave Self-Healing Power Amplifier with Adaptive Amplitude and Phase Linearization in 65-nm CMOS", IEEE Transactions on Microwave Theory and Techniques, Vol. 60, Issue 5, pp. 1342-1352, May 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. Gutiérrez-Gutiérrez, "Tridiagonal matrices in comb ?lters", 2012 SIAM Conference on Applied Linear Algebra, Valencia (Spain), June 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

E. Fernandez, A. Beriain, H. Solar, I. Rebollo, A. García-Alonso, J. Sosa, J.M. Monzón, S. García-Alonso, J.A. Montiel-Nelson, R. Berenguer , "A Low Power Voltage Limiter for a Full Passive UHF RFID Sensor on a 0.35mm CMOS Process", Microelectronics Journal, Vol. 43, Issue 10, pp. 708-713, October 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

X. Insausti, P. M. Crespo, B. Beferull-Lozano, "In-network computation of the Transition Matrix for Distributed Subspace Projection", IEEE International Conference on Distributed Computing in Sensor Systems, Hangzhou, China, 16-17 May 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

X. Insausti, P. M. Crespo, B. Beferull-Lozano, "Distributed Subspace Projection in Wireless Sensor Networks using Computational Codes", IEEE International Conference on Distributed Computing in Sensor Systems, Hangzhou, China, 16-17 May 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

L. Gutiérrez, I. Aguinaga, F. Ramos, M. Harders, "Speeding Up the Simulation of Deformable Objects by Mesh Improvement", Proceedings of the 25th International Conference on Computer Animation and Social Agents. Singapore. May 9-11, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

G. Echegaray, D. Borro, "A Methodology for Optimal Voxel Size Computation in Collision Detection Algorithms", Virtual Reality. 2012. .

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Rubilar, G. R. Tortella, R. Cuevas, M. Cea, S. Rodríguez-Couto , M. C. Diez, "Adsorptive removal of pentachlorophenol by Anthracophylum discolor in a fixed-bed column", Water, Air, & Soil Pollution 223, 2463-2472 (2012).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents, Mathematical Modelling and Simulation of Environmental Processes and Technologies

A.C. Leff, M. Grimes, N. Isasti, C. Winkler, P. Uranga, M.L. Taheri, "Quantification of Compositional Effects on Transformation Kinetics in High Strength Low Alloy Steels Using In Situ TEM", 2012 TMS Annual Meeting & Exhibition, 11-15 Marzo 2012, Orlando, FL.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

J. L. Lanzagorta, D. J. Badiola, I. Gutiérrez, "Efecto de las variables de proceso en el comportamiento mecánico y microestructural durante las inversiones cíclicas de la deformación", Tecnun 50th Anniversary Conference. San Sebastian, 31 Mayo-1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. López-Ruiz, N. Ordás, I. Iturriza, F. Koch, S. Lindig, M. Walter ,C. García-Rosales, "Self-passivating tungsten based alloys obtained by hip for application in fusion reactors beyond ITER (DEMO)", Proceedings of the Euro PM2012 - Basel, Switzerland, (2012) Comunicación oral en el congreso Euro PM2012 - Basel, Switzerland, September 16-19, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

I. Gutierrez, "Desarrollo de nuevos aceros: ejemplos y pasos en la secuencia de innovación", Tecnun 50th Anniversary Conference. San Sebastian, 31 Mayo-1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

P. López-Ruiz, N. Ordás, I. Iturriza, F. Koch, S. Lindig, M. Walter , C. García-Rosales, "Self-passivating tungsten based alloys for application in fusion reactors beyond ITER", oral en el congreso: Energy 2012 - Madrid, September 17-20, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Iza-Mendia, I. Gutiérrez , "Hot Workability of Duplex Stainless Steels", Tecnun 50th Anniversary Conference. San Sebastian, 31 Mayo-1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

E. Gil, N. Ordás, I. Iturriza, M. Sarasola , C. García-Rosales, "Development of nanostructured ODS RAF steels by HIPing of gas atomized powders with and without mechanical alloying", Presentado como póster en el Workshop: Oxide - dispersion - strengthened alloys for nuclear applications, Oxford UK, Sept 24-26 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

P. Uranga, B. López, J.M. Rodríguez-Ibabe, "Novel strategies to achieve microstructural homogeneity in near-net-shape technologies", Tecnun 50th Anniversary Conference. San Sebastian, 31 Mayo-1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Beriain, I. Rebollo, I. Fernández, J.F. Sevillano , R. Berenguer , "A passive UHF RFID pressure sensor tag with a 7.27 bit and 5.47pj capacitive sensor interface", IEEE MTT-S International Microwave Symposium, IMS2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Z. Aretxabaleta, B. Pereda, B. López, "Cinéticas de ablandamiento de aceros con alto contenido en Al", XII Congreso Nacional de Materiales, Alicante. 30 Mayo – 1 Junio, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

F.M. Ibanez, J. Vadillo, J.M. Echeverria, L. Fontán, "25kw DC/DC converter applied to a supercapacitor stack", IEEE International conference ESARS, October 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

L. Llanos, B. Pereda, D. Jorge-Badiola, B. López, "Estudio de las cinéticas de recristalización en aceros con alto contenido en Mn mediante EBSD", XII Congreso Nacional de Materiales, Alicante. 30 Mayo – 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

E. Fernández, H. Solar, J. de Nó, I. Gutiérrez , R. Berenguer , "A 150nW CMOS Novel Temperature Sensor for Remote Patient Monitoring base don an Auto-Resonant Active Inductor Architecture", IEEE International Symposium on Circuits and Systems, Seoul (Korea), 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

N. Isasti, D. Jorge-Badiola, B. López, M.L. Taheri, P. Uranga, "Análisis de las transformaciones de fase en aceros microaleados con niobio y niobio-molibdeno", XII Congreso Nacional de Materiales, Alicante. 30 Mayo – 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Beriain, I. Rebollo, I. Fernández, J.F. Sevillano , R. Berenguer , "A Passive UHF RFID pressure sensor tag with a 7.27bit and 5.47pJ capacitive sensor interface", IEEE International Microwave Symposium (IEEE-MTT), Montreal (Canada) 17 - 22 June 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

N. González Cia, C. Revilla Gómez, J.M. Rodriguez-Ibabe, "Parámetros de ductilidad, daño y cristalografía durante el conformado en caliente de aceros resulfurados", XII Congreso Nacional de Materiales, Alicante. 30 Mayo – 1 Junio, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M. de Gracia, A. Larrea, R. Novak , I. Irizar, "Real Time Process Control with the AqquaScan System – Full Scale Studies", WEFTEC 2013, Chicago IL – USA, Oct 5-9, 2013. (2012-Submitted).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

A. Mancisidor, C. Luno-Bilbao, I. Iturriza, "Tresna diamantatuen fabrikaziorako matrize metalikoen garapena hauts metalurgiaren bidez", (Congress & Exhibition), Mondragrón (Spain); 3th-4th May 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Esteban-Gutiérrez, E. Aymerich, "A new tool to predict the methane potential of solid organic waste co-digestion", AD13 - 13th World Congress on Anaerobic Digestion: Recovering (bio) Resources for the World, June 25-28 2013, Santiago de Compostela (Spain). (2012-Submitted).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

C. Luno-Bilbao, N. Vielma, A. Mancisidor, J.M. Sanchez , I. Iturriza, "Improvement of diamond tool metallic bonds through new alloying strategies", IV Congreso Nacional de Pulvimetalurgia”, Sevilla (Spain); 20th-22th June 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Lizarralde, C. F. Osborne, C. Buckley, K. M. Foxon, P. Grau , C. J. Brouckaert, "Guidelines for the Optimum Start-up Procedure of an Anaerobic Digester Based on a Mathematical Model", AD13 - 13th World Congress on Anaerobic Digestion: Recovering (bio) Resources for the World, June 25-28 2013, Santiago de Compostela (Spain). (2012-Submitted).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

C. Luno-Bilbao, N. Vielma, A. Mancisidor, J.M. Sanchez , I. Iturriza, "Key metallurgical phenomena involved in the sintering of prealloyed powders designed for diamond impregnated tools", International PM Conference, Yokohama, Japan (2012).

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Lizarralde, C. J. Brouckaert, G. A. Ekama , P. Grau, "Incorporating water chemistry into the steady-state models for wastewater treatment processes: case study anaerobic reactor in the SANI® process", AD13 - 13th World Congress on Anaerobic Digestion: Recovering (bio) Resources for the World, June 25-28 2013, Santiago de Compostela (Spain). (2012-Submitted).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

I.Iparraguirre, F.Ibarreta, R.Martinez ,J.M.Sanchez, "Sinterización en fase líquida de cermets basados en TiCN-WC-Cr-Ni para aplicaciones de laminación en caliente", IV Congreso Nacional de Pulvimetalurgia”, Sevilla (Spain); 20th-22th June 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Aristizabal, I. Iturriza, J.M. Sánchez, "Densification, microstructure and wear properties of WC-Ni-Co-Cr alloys used in hot rolling applications", International PM Conference, Yokohama, Japan (2012)..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Bueno, S. Saccarola, S. Sainz, F. Castro, "Sinter-hardening response from a Cr-containing iron based powder during industrial sintering", IV Congreso Nacional de Pulvimetalurgia, Sevilla 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Veiga, S. Sainz, F. Castro, "Influencia de la adición de níquel en la microestructura de los aceros PM sinterizados con polvos tipo Distaloys", IV Congreso Nacional de Pulvimetalurgia, Sevilla 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, S. Sainz, A. Veiga, P. Ortiz, "The master alloy concept and its consequences", International Conference on Powder Metallurgy and Particulate Materials, Nashville, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, A. Veiga, F. Baumgaertner, J. Heyde, S. Saccarola, S. Bueno, "Endogas sintering of a Cr-containing PM steel", International Conference on Powder Metallurgy and Particulate Materials, Nashville, 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F.M. Ibanez, J. Vadillo, M. Martínez-Iturralde, J.M. Echeverria, "30kW DC-DC Converter with regenerative mode for Electric Cars", Journal of Power Electronics, pISSN: 1598-2092 eISSN: 2093-4718.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

A. Muniategui, J. Pey, F. Planes, A. Rubio, "Joint analysis of miRNA and mRNA expression data", Briefings in Bioinformatics, June 12, 2012, pp. 16.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

A. Muniategui, R. Nogales-Cadenas, M. Vázquez, X.L. Aranguren, X. Agirre, A. Luttun, F. Prosper, A. Pascual-Montano, A. Rubio, "Quantification of miRNA-mRNA interactions", PLOS ONE; 2012 February page16.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

J. Paredes, S. Becerro, F. Arizti, A. Aguinaga, J. Del Pozo, S. Arana, "Real time monitoring of the impedance characteristics of Staphylococcal bacterial biofilm cultures with a modified CDC reactor system", Biosensors & Bioelectronics, volume 38, issue 1, October–December 2012, Pages 226-232.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

Download

F.M. Ibáñez, J. Vadillo, J.M.Echeverria, A. Galarza, L.Fontán, "Design and implementation of a high-current test bench for batteries and supercapacitors characterization", TECNUN 50th Anniversary Conference – Engineering: science and techology.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Suescun, A., "Una nueva estrategia para el control activo de la basculación en vehículos ferroviarios análisis, desarrollo y experimentación en vía", PhD Thesis Dissertation in May 1996. Ed. Universidad de Navarra (March 2012), (ISBN 84-8081-155-2).

Publication type: Book.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

I. Ocaña, D. González, I. Castro, M.R. Elizalde, J.M. Martínez-Esnaola, "Development of New Techniques for Mechanical Characterization of Materials for Microelectronics", 50th Anniversary Conference. Engineering: Science and Technology. Ed. Servicio de Publicaciones de la Universidad de Navarra (Pamplona) ISBN:978-84-8081-290-0 31 de Mayo - 1 de Junio 2012. San Sebastián (Spain) .

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M. Trueba, I. Ocaña, M.R. Elizalde, J.M. Martínez Esnaola, "Mechanical assessment of thin films through microbeam testing", Poster presentation. 50th Anniversary Conference. Engineering: Science and Technology. Ed. Servicio de Publicaciones de la Universidad de Navarra (Pamplona) ISBN:978-84-8081-290-0 31 de Mayo - 1 de Junio 2012. San Sebastián (Spain).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

L. Iturrioz, M. Trueba, I. Ocaña, M.R. Elizalde , J.M. Martínez Esnaola , "Caracterización de películas delgadas mediante ensayo de membranas", Poster presentation. 50th Anniversary Conference. Engineering: Science and Technology. Ed. Servicio de Publicaciones de la Universidad de Navarra (Pamplona) ISBN:978-84-8081-290-0 31 de Mayo - 1 de Junio 2012. San Sebastián (Spain) .

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M. Trueba, I. Ocaña, M.R. Elizalde, J.M. Martinez-Esnaola, M.T. Hernandez, M. Haverty, G. Xu, D. Pantuso, "Fracture Assessment of Thin Films Through Testing of Microbeams", Oral Presentation Proceedings of the 1st International Conference of the International Journal of Structural Integrity, Sergio M O Tavares Ed. ISBN: 978-989-723-015-8. June 25-28, 2012. Oporto (Portugal).

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

L. Gutiérrez, I. Aguinaga, M. Harders, F. Ramos, "Speeding up the simulation of deformable objects through mesh improvement", Computer Animation and Virtual Worlds, Vol. 23, No. 3-4, pp. 425–433. May-August 2012..

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

S. Beltrán, M. Maiza, A. de la Sota , J.M. Villanueva , E. Ayesa , "Advanced data management for optimising the operation of a full scale WWTP", Water Science & Technology, 66 (2), 314-320 (2012).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

J. Melo, E. Sánchez, I. Díaz, "Adaptive Admittance Control to Generate Real-Time Assistive Fixtures for a Cobot in Transpedicular Fixation Surgery", IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob), pp. 1170-1175. Roma (Italy). June 24-28, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

M. Aristizabal, I. Iparraguirre, F. Ibarreta, R. Martinez, J.M.Sanchez, "Wear Resistance of WC-Ni-Co-Cr Cermets in contact with steel at high temperatures", 6th Iberian Congress on Tribology 2011, Friction and wear of materials, Mostoles, 16-17 June, Madrid (2011)29-38..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

I. Iparraguirre, M. Aristizabal, N. Rodríguez, F. Ibarreta, R. Martínez, J. M. Sánchez, "TiCN-WC-Cr-Ni Based Cermets Produced by Liquid Phase Sintering for Hot Rolling Applications", Proceedings of Euro PM2011 - Hard Materials, S. 17, nº 160, Barcelona, Oct., (2011).

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Louredo, M., Díaz, I. , Gil, J.J., "A Robotic Bone Drilling Methodology Based on Position Measurements", IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob), pp. 1155-1160. Roma (Italy). June 24-28, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

J. Melo, A. Bertelsen, D. Borro, E. Sánchez, "Implementation of a cooperative human-robot system for transpedicular fixation surgery", Proceedings of the 50th Anniversary Conference. Engineering: Science and Technology. San Sebastián, Spain. May 31 – June 1, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

M. Aristizabal, J.M. Sánchez, N. Rodríguez, F. Ibarreta, R. Martínez, "Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides", Corrosion Science, 53 (2011) 2754-2760.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Rodríguez-Couto, J.L. Toca Herrera, "Applications of Laccases", Advances in Environmental Research. Daniels, J.A. (ed.). Nova Science Publishers, Hauppauge, NY. ISBN 978-1-61470-743-1, vol. 22, pp. 219-232 (2012).

Publication type: Book Chapter.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

S Vervynckt, K. Verbeken, B. López, J.J. Jonas, "Modern HSLA steels and role of non recrystallization temperature", International Materials Reviews Vol. 57 no. 4 (2012) 187-207.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

R. D’Errico, M. Bottazzi, F. Natali, E. Savioli, S. Bartoletti, A. Conti, D. Dardari, N. Decarli, F. Guidi, F. Dehmas, L. Ouvry, U. Alvarado, N. Hadaschik, C. Frankek, A. Zhangk, Mhanna, M. Sacko, Y. Wei, A. Sibille, "An UWB-UHF Semi-Passive RFID System for Localization and Tracking Applications", IEEE International Conference on RFID-Technology and Applications (IEEE RFID – TA) Grenoble (France) 5-7 November 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

J. García, A. Arriola, F. Casado, X. Chen, J.I. Sancho, D. Valderas, "Coverage and Read Range Comparison of Linearly and Circularly Polarized RFID UHF Tag Antennas", IET Microwaves, Antennas & Propagation, vol. 6, no. 9, pp. 1070, 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

C. De Dios, F. Ordás, J. Marín, L. Matey, A. Suescun, G. Vélez, T. Schelenz, "Simulador de máquina de proyección de hormigón", Ingeopres, No. 214, pp. 64-69. May 2012..

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics, ITS and Simulators

A Martín-Meizoso, C. Blanco, J.M. Cabrero ,K.G. Gebremedhin, "Failure Criteria for Wood Under Multiaxial Loading", Invited Plenary Lecture. In “Fracture Mechanics for Durability, Reliability and Safety”, pp. 459-470.19th European Conference on Fracture (ECF19), Kazan, Russia, 26-31 August, 2012. ISBN: 978-5-905576-18-8, .

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

C. Blanco, A Martín Meizoso, "Sensitivity analysis of the staircase method to determine the fatigue limit", Fracture Mechanics for Durability, Reliability and Safety ,pp. 97-105, 19th European Conference on Fracture (ECF19), Kazan, Russia, 26-31 August, 2012, ISBN: 978-5-905576-18-8.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

C. Atkinson, J.M. Martínez-Esnaola, M.R. Elizalde, "Contact Mechanics: A review and some applications", Materials Science and Technology, Vol. 28, Num. 9-10, October 2012, pp. 1079-1091(13).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Bilbao, A. Brazález, I. García, M. Tybel , N. Aguiriano , "Virtual Instrument Cluster for enhancing the configurability of an automotive simulator", Simulation: Transactions of the Society of Modeling and Simulation International, Vol. 88, No. 8, pp. 957-971. August 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection, ITS and Simulators

S. Rodriguez-Couto, "A promising inert support for the decolouration of textile wastewater by the white-rot fungus Trametes pubescens", Journal of Hazardous Materials 233/234, 158-162 (2012) .

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

T. Gomez-Acebo, F. Castro, "Modelling of Diffusion at High Pressure", CALPHAD XLI, Berkeley, California, USA, June 3-8, 2012, Comunicación Oral.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

T. Schelenz, A. Suescun, L. Wikström, M. Karlsson, "Passenger-centered design of future buses using agent-based simulation", Proceedings of the Transport Research Arena (TRA 2012), pp. 1662-1671. Athens, Greece. April 23-26, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection, ITS and Simulators

H. Álvarez, I. Leizea, D. Borro, "A Survey on Optical Tracking for Augmented Reality", Tutorials Proceedings of the XXII Congreso Español de Informática Gráfica (CEIG'12), pp.31-40. Jaén, Spain. September 11-14, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics

D. Borro, "Desarrollos de imagen médica, simulación, y biorrobótica en el Ceit", Invited Speaker in the Special Session “Simulación y Visualización Médica” of the XXII Congreso Español de Informática Gráfica (CEIG'12). Jaén, Spain. September 11-14, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

J. Arruabarrena, P. Uranga, B. López , J.M. Rodríguez Ibabe, "Carbide spheroidization kinetics in a low alloy medium carbon steel: Relevance of deformation after transformation (2012)", Iron & Steel Technology, vol. 9, no. 10, 2012, pp. 122-128.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

I. Iparraguirre, F. Ibarreta, R. Martinez, J.M. Sanchez, "Densification, Microstructure and Thermal Properties of TiCN-WC-Ni-Co-Cr Alloys Used in Hot Rolling Applications", Proc. Euro PM2012, Vol. 2. Hard Materials and Diamond Tooling, Basel, 16-19 Sept. 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

P. López-Ruiz, N. Ordás, I. Iturriza, F. Koch, S. Lindig, M. Walter, C. García-Rosales, "self-passivating tungsten based alloys OBTAINED BY HIP for application in fusion reactors beyond ITER (DEMO)", Euro PM2012, Vol. 2. Hot Isostatic Pressing, Basel, 16-19 Sept. 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Fuente, J.M. Martín, I. Iturriza, F. Castro, "Multiphase nickel aluminides produced by hot isostatic pressing of NANOstructured powders obtained by mechanical alloying ", Euro PM2012, Vol. 2. Hot Isostatic Pressing, Basel, 16-19 Sept. 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Pasupathy, J.M. Martín, A. Rivas, I. Iturriza, F. Castro, "Experimental Characterization of Water Jets for Melt Atomization and their Impact on Powder Properties", PM world Congress, Yokohama, 14-18 October 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Z. Aretxabaleta, B. Pereda, S.V. Parker, B. López, "Influence of Nb on the Critical Temperatures during Multipass Deformation of High Al Steels", 4th International Conference in Thermomechanical Processing of Steels, TMP2012, 10-12 September 2012, Sheffield, UK..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Alberdi, N. Gil-Negrete, L. Kari, "Influence of carbon black and plasticisers on the dynamic properties of isotropic magneto-sensitive natural rubber", Plastics, Rubber and Composites, vol. 41(7), pp. 310-317. 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

E. Gómez, A. Alonso, J.G. Giménez, J. Vinolas, "Railway dynamometric Wheelset: A comparison of existing solutions and a proposal for the reduction of measurement errors", "Workshop on High-Speed and Intercity Railways (vol. 2) 261 - 284, ISSN 1876-1100 Editorial Springer.

Publication type: Book Chapter.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Y. Bezin, A. Alonso, "Assessment of Railway Track Conicity and the Question of Limit Radius", First International Conference on Railway Technology: research, development and Maintainance, RW2012. Las Palmas de Gran Canaria (Spain). 18-20 Abril 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

J. Echeberria, N. Rodríguez, J. Vleugels, K. Vanmeensel, A. Reyes-Rojas, A. Garcia-Reyes, C. Domínguez-Rios, A. Aguilar-Elguezabal, M.H. Bocanegra-Bernal, "Hard and tough multi- and single-walled carbon nanotube reinforced zirconia toughened alumina composites prepared by spark plasma sintering", Carbon 50 (2012) 706-717.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M.H. Bocanegra-Bernal, A. Reyes-Rojas, A, Aguilar-Elguezábal, E. torres-Moye, J. Echeberria, "X-ray diffraction evidence of a phase transformation in zirconia by the presence of graphite and carbon nanotubes in zirconia toughened alumina composites", Journal of Refractory Metals and Hard Materials 35 (2012) 315-318.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M.H. Bocanegra-Bernal, A, Aguilar-Elguezábal, J. Echeberria, "High Temperature Oxidation of silicon nitride based ceramics: A review. ", .

Publication type: Book Chapter.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J.L. Lanzagorta, D. Jorge-Badiola, I Gutiérrez, "Modelling Mechancial Behaviour in Multi-Stage Strain Reversal", 14th International Conference Metal Forming, September 16-19 (2012) Krakow, Poland..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

J.L. Lanzagorta, D. Jorge-Badiola, I. Gutiérrez , "Modelo Mecánico Aplicable a Inversiones Cíclicas de la Deformación", Proceedings XIII Congreso Nacional de Propiedades Mecánicas en Sólidos PMS2012, Alcoy, (2012), pp. 43-48..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

D. Jorge-Badiola, A. Iza-Mendia, "Review on the EBSD characterization of hot worked microstructures in steels", International Symposium on Plastic Deformation and Texture Analysis Alcoy (Spain), September 24-25th, 2012. Invited Conference.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Merideño, F.J. Nieto, N. Gil-Negrete, A. Landaberea, J. Iartza, "Numerical vibro-acoustic analysis of railway wheels with and without damping solutions", Noise Control Engineering Journal, vol. 60, no. 4, pp. 458-472, August 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration, Railway Dynamics and Road Infrastructure

C. Revilla, P. Uranga, B. López , J.M. Rodriguez Ibabe, "Control of Carbide Distributions by Modifying Heating Rates in Induction Tempering Treatments", Proceedings of the Materials Science and Technology (MS&T) 2012, Steel Product Metallurgy and Applications Symposium, October 7-11, 2012, Pittsburgh, PA, USA. pp. 1069-1076.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M. Khodaian, J. Perez, B.H. Khalaj, P. Crespo, "Adaptive access and rate control of CSMA for energy, rate, and delay optimization", EURASIP Journal on Wireless Communications and Networking 2012, 2012:27.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

M. Hartshorne, A. Leff, N. Isasti, C. Winkler, P. Uranga , M.L. Taheri, "Quantification of Compositional Effects on Transformation Kinetics in Nb Microalloyed Steels Using In Situ TEM", Materials Science and Technology (MS&T) 2012 , October 7-11, 2012, Pittsburgh, PA, USA.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

H. Álvarez, I. Leizea, D. Borro, "A new marker design for a robust marker tracking system against occlusions", Computer Animation and Virtual Worlds, Vol 23, No 5, pp. 503-518, September/October 2012..

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

Download

A. Iza-Mendia, M.A. Altuna, B. Pereda, I. Gutiérrez, "Precipitation of Nb in Ferrite After Austenite Conditioning. Part I: Microstructural characterization", Metallurgical and Materials Transactions A, December 2012, Vol 43, Issue 12, pp 4553-4570.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

M.A. Altuna, A. Iza-Mendia, I. Gutiérrez, "Precipitation of Nb in Ferrite After Austenite Conditioning. Part II: Strengthening Contribution in HSLA Steels", Metallurgical and Materials Transactions A. December 2012, Vol 43, Issue 12, pp 4571-4586.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

A. Arriola, A. Rodriguez, N. Perez, T. Tavera, Michael J. Withford, A. Fuerbach, S.M. Olaizola, "Fabrication of high quality sub-micron Au gratings over large areas with pulsed laser interference lithography for SPR sensors", Optical Materials Express Vol. 2, Iss. 11, pp. 1571–1579 (2012).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

Download

L.Rojo, I. Castro-Hurtado, E. Castaño, "Impedance spectroscopy of an YSZ thin film solid electrolyte fabricated by RF magnetron sputtering.", VIII International Workshop on Semiconductor Gas Sensor.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

P. Rodríguez-Franco, A. Arriola, N. Darwish, H. Keshmiri, T. Tavera, S.M. Olaizola, M. Moreno, "Fabrication of broad area optical nanostructures for high throughput chemical sensing", IMCS 2012 - The 14th International Meeting opn chemical sensors 20-23 May 2012 Nuremberg (Germany).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

A. Arriola, A. Rodriguez, T. Tavera, N. Perez, M. Withford, A. Fuerbach , S.M. Olaizola, "Fabrication of thin metallic 1D grating as a constituent of a refractive index sensor for biomedical applications", CUDOS Anual Workshop, 31/1-3/2 2012, Shoal Bay (Australia).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

I.Castro-Hurtado, G.Gª Mandayo, J.Gonzalez de Chávarri, E.Castaño, I.Gracià, C.Cané, E. Figueras, M.Salleras , "SnO2 NWs-based sensor prototype for low temperature formaldehyde detection", IMCS 2012 - The 14th International Meeting opn chemical sensors 20-23 May 2012 Nuremberg (Germany).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J.G. Chávarri, I. Castro-Hurtado, G. Gª Mandayo, E. Castaño, "In-situ grown nanostructured zinc oxide layer for conductometric gas microsensors", MME 2012- The 23rd Micromechanics and Microsystems Europe Workshop, September 2012, Ilmenau (Germany).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

L.Rojo, E. Castaño, "Electrochemical sensor for the measurement of biogas nad natural gas quality", GERG Academic Network Event, 14-15 June 2012 (Brussels).

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

I. Castro-Hurtado; G. Garcia-Mandayo; E. Castaño, "New strategies to enhance gas sensing properties of conductometric formaldehyde gas sensors:from thin films to nanostructured materials", VIII International Workshop on Semiconductor Gas Sensor.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Gutierrez-Gutierrez, P. Crespo, "Block Toeplitz Matrices: Asymptotic Results and Applications", Foundations and Trends® in Communications and Information Theory: Vol. 8: No 3, pp 179-257 (2012).

Publication type: Book.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

E. Sarasketa-Zabala, L. Otaegi, L.M. Rodriguez-Martinez, M.A. Alvarez, N. Burgos, F. Castro, I. Villarreal, , "High temperature stability of porous metal substrates under highly humidified hydrogen conditions for metal supported Solid Oxide Fuel Cells ", Solid State Ionics, 222-223, 16-22 (2012)..

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Cordón, S. Sainz, S. C. Costa, I. Barreno, I. Urrutibeascoa, X. Gómez, "Durability improvement for heater head on gas fired small Stirling Engines ", 15th International Stirling Engine Conference (ISEC), Dubrovnik, Croatia, 2012..

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Louredo, I. Díaz, J.J. Gil, "DRIBON: A Mechatronic Bone Drilling Tool", Mechatronics, vol. 22, pp. 1060-1066. December 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Haptic and Interfaces with Force Reflection

B. O. Hogstad, G. Rafiq, M. Pätzold, P. M. Crespo, "On the error sequences of M-ary FSK modulation schemes over Nakagami-m fading channels", 2012 International Conferences on Advanced Technologies for Communications, Hanoi, Vietnam, Oct. 10-12, 2012, pp. 92-97.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. Pey, L.F. de Figueiredo, A. Podhorski, A. Rubio, F. J. Planes, "Gene expression data at the light of Elementary Flux Modes", XI Jornadas de Bioinformática (JBI2012). Barcelona, Spain, January 23-25, 2012. Poster.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

D. Iyer, J. Díaz, G. Zouridakis, "Consistency of the auditory evoked response: The presence of aberrant responses and their effect on N100 localization ", Journal of Neuroscience Methods.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

G. Pimentel, C. Capdevila, M. J. Bartolomé, J. Chao, M. Serrano, A. García-Junceda, M. Campos, J. M. Torralba, J. Aldazabal, "Aceros ODS FeCrAl avanzados para aplicaciones estructurales de alta temperatura en sistemas de generación de energía", Revista de Metalurgia Vol.48(4) 2012 Paginas 303-316 ISSN 0034-8570.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

S. Bueno, S. Saccarola, A. Karuppannagounder, A. Veiga, S. Sainz, F. Castro, "Lean Cr-containing powders for obtaining high performance PM steel grades. Powder Metallurgy ", Powder Metallurgy, vol. 55 (2), pp. 92-94, 2012..

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J. Gil Sevillano, "On the limits of strain hardening by plastic deformation", International Symposium on Plastic Deformation and Texture Analysis Alcoy (Spain), September 24-25th, 2012. Invited Conference.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M.C. Revilla, B. López , J.M. Rodriguez Ibabe, "Efecto de las características geométricas de las inclusiones en la ductilidad en caliente en aceros resulfurados", 19ª Conferencia de Laminación IAS, Rosario (Argentina), 2012, Conference proceedings, pp. 1-9. Keynote Invitada .

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M. Hartshorne, A. Leff, N. Isasti, C. Winkler, Sheng-Yen Li, R. Arroyave, P. Uranga, M.L. Taheri,, "Quantification of the effects of Mo and V on the Transformation Kinetics in Nb Microalloyed Steels Using In Situ TEM", 2012 MRS Fall Meeting, November 25-30, 2012, Boston, MA, USA.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Beriain, I. Rebollo, I. Fernández, J.F. Sevillano , R. Berenguer , "A Passive UHF RFID pressure sensor tag with capacitive sensor interface", 50th Anniversary Conference- Engineering: Science and Technology, Donostia-San Sebastian, España, 31 mayo- 1 junio 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

J. Melo, A. Bertelsen, D. Borro, E. Sánchez., "Nuevo Asistente Robótico para Cirugía: Arquitectura y Algoritmos de Control", Revista Dyna, Ingeniería e Industria, Vol. 87, No. 6, pp. 647-654. November/December 2012.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

A. Garín, A. Baquero, A.,J. Marín, M.R. García-Eulate, J. Pla, D. Borro, "Early-onset and Late-onset Major Depressive Disorder in the Elderly: A DTI Study with Tract-based Spatial Statistics", Proceedings of the XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2012). San Sebastián, Spain. November 19-21, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

G. Echegaray, I. Herrera, I. Aguinaga, C.Buchart, D. Borro, "Towards a Multimodal Neurosurgery Simulator: Brain Haptic Physical Simulation and Visualization", Proceedings of the XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2012). San Sebastián, Spain. November 19-21, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

A. Bertelsen, M. Echeverría, E. Gómez,D. Borro, "Distortion Correction and Calibration of Intra-operative X-ray Images using a constrained DLT Algorithm", Proceedings of the XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2012). San Sebastián, Spain. November 19-21, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

C. Buchart, A. Bertelsen, D. Borro, "viewitLib – A Framework for the Development of Software for Medical Images Visualization", Proceedings of the XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2012). San Sebastián, Spain. November 19-21, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Becerro, S., J. Paredes, S. Arana., "Monitorización impedimétrica del desarrollo de biocapas bacterianas mediante biosensores basados en microelectrodos interdigitados para aplicaciones biosanitarias", XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, San Sebastián, 19-21 Noviembre 2011..

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, Micro and Nano Systems

A. Zuzuarregui Olasagasti, P. Ansorena Legarra, E. Pérez-Lorenzo, M. Mujika Garmendia, "Optimización de un sistema de funcionalización de bio-receptores proteicos para su implementación en un biosensor electroquímico", XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, San Sebastián, 19-21 Noviembre 2011..

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, Micro and Nano Systems

A. Benavente Babace, A. Ubarrechena Bengoechea, E. Pérez Lorenzo, M. Mujika Garmendia, "Caracterización de flujos en microchips destinados a atrapar células individuales", XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, San Sebastián, 19-21 Noviembre 2012..

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, Micro and Nano Systems

L. Rojo, G. Gª Mandayo , E. Castaño , "Thin film YSZ solid state electrolyte characterization performed by electrochemical impedance spectroscopy", 6ª Jornadas Franco-Españolas, Marsella, 22-23 Noviembre 2012.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

J. Gonzalez-Chavarri, I. Castro-Hurtado, G. Gª Mandayo, E. Castaño, "Conductometric gas microsensors using novel material growth techniques for sensitivity enhancement", 6ª Jornadas Franco-Españolas, Marsella, 22-23 Noviembre 2012.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Fuente, J.M. Martín, I. Iturriza, F. Castro, "Aluminuros de níquel multifásicos producidos por prensado isostático en caliente de polvos nanoestructurados obtenidos por aleado mecánico", IV Congreso Nacional de Pulvimetalurgia, Sevilla (Spain), 20th-22th June 2012.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Alonso, G. Giménez, "Desarrollo de una nueva metodología para el análisis de estabilidad de vehículos ferroviarios", XIX Congreso Nacional de Ingeniería Mecánica. Castellón (Spain). November 14-16, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Aizpun, M., Viñolas, J., "Influencia de la cadena de tracción y las fuerzas tractoras en los modelos dinámicos ferroviarios", XIX Congreso Nacional de Ingeniería Mecánica. Castellón (Spain). November 14-16, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

I. Díaz, J.J. Gil, D. Borro, E. Sánchez, "JIHAP: A Virtual Serious Game for Neurological Robotic Rehabilitation", Proceedings of the XXX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2012). San Sebastián, Spain, November 19-21, 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

C. Hernández M. Auset ,C. Rodriguez , J. Malfeito ,E.Gonzalez , L. Larrea , "Proceso ELFA®: Condiciones operacionales para nitritación completa en soportes móviles plásticos", Retema, nº 156, 30-38.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

Larrea L. , "Pasado, presente y futuro de las tecnologías de eliminación de nutrientes . Ingeniería civil", .

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, New Advanced Technologies for Wastewater Treatment

U. Alvarado, A. Juanicorena, I. Adín, B. Sedano, I. Gutiérrez, J. de Nó, "Energy Harvesting Technologies for Low-Power Electronics", European Transactions on Telecommunications. Agosto 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

D. Batstone, Y. Amerlinck, G. Ekama, R. Goel, P. Grau, B. Johnson, I. Kaya, J-P. Steyer, S.Tait, I.Takács, P.A. Vanrolleghem, C.J. Brouckaert, E. Volcke, "Towards a generalized physicochemical framework", Water Science & Technology: vol. 66, no. 6, pp. 1147–1161 (2012).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

B.K. Tanner, M.C. Fossati, J. Garagorri, MR Elizalde, D. Allen, P.J. McNally, D. Jacques, J. Wittge , A.N. Danilewsky, "Prediction of the propagation probability of individual cracks in brittle single crystal materials", Applied Physics Letters Vol. 101, 041903 (2012).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

S. Beltrán , M. Maiza , A. de la Sota , J.M. Villanueva, E. Ayesa , "Advanced data management for optimising the operation of a full scale WWTP", IWA World Water Congress and Exhibition 2012.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M. Maiza , A. Bengoetxea , P. Grau , W. De Keyser , I. Nopens, D. Brockman , J. F. Steyer , F. Claeys , G. Urchegi , E. Ayesa , "AddControl: plant virtualization for control solutions in WWTP", IWA World Water Congress and Exhibition 2012.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

M. Esteban , E. Aymerich , "Biometanización vs compostaje en la gestión de fangos de EDAR y residuos agroalimentarios: estudio de un caso en Navarra", III Jornadas de la Red Española de Compostaje, 2012.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

T. Fernández, P. Grau, J. Abelleira, A. Donoso-Bravo, S. Pérez-Elvira, J.M. Lema, J.L. Campos, S. Suárez, A. Mosquera-Corral, E. Ayesa, "Simulation based analysis of new layouts for eco-efficient sewage treatment plants", Proceedings of the Ecotechnologies for Wastewater Treatment: Technical, Environmental & Economic Challenges. EcoSTP. Santiago de Compostela, Spain, June 25-27. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

C. Hernández, C. Rodríguez, E. González, L. Larrea, "Optimum Operational conditions for robust MBBR complete nitritation", Proceedings of the Ecotechnologies for Wastewater Treatment: Technical, Environmental & Economic Challenges. EcoSTP. Santiago de Compostela, Spain, June 25-27. (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, New Advanced Technologies for Wastewater Treatment

S. Contreras, M.S. Yalfani , S. Rodríguez-Couto, "Eliminación de ácido clofíbrico mediante la combinación de Procesos de Oxidación Avanzada y la degradación por hongos", X Reunión de la Mesa Española de Tratamiento de Aguas (META). Almería (Spain), 4-6 October 2012. (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

L. Gioia, P. Menéndez, C. Manta, K. Ovsejevi, J. Burgueño , S. Rodríguez-Couto, "Optimización del cultivo de Pycnoporus sanguineus en desechos forestales para la producción de lacasa y aplicación de esta enzima en la degradación de colorantes sintéticos", XXI Congreso Latino Americano de Microbiología (ALAM). Santos (Brazil), 28 October-1 November 2012. (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

J. Alferes , I. Irizar, "Evaluation of performance robustness of anaerobic digestion controllers: a benchmark study using ADM1", WWTmod 2012, Quebec – Canada, Feb 26-28, 2012. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

J. Alferes, P. A. Vanrolleghem, I. Irizar, "Design procedure for anaerobic digestion controllers aimed at feasible full-scale application", The IWA World Water Congress & Exhibition, Busan – Korea, Sept 16-21, 2012. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

I. Irizar, A. Larrea, K. Connery, R. Novak , M. de Gracia, "A practical encounter with model-based optimum design of wastewater treatment systems – applied to High Purity Oxygen aeration", WEFTEC 2012, New Orleans - USA, Sept 29-Oct 3, 2012. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

S. Nájera, M. Gil-Martínez, J.A. Zambrano, I. Irizar, "Control Robusto de Proceso ATAD para mejorar la calidad de fango tratado", XXXIII Jornadas de Automática, Vigo – España, Sept. 5-9, 2012. (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

S. Nájera, M. Gil-Martínez, J.A. Zambrano, I. Irizar, "Estabilización y pasteurización óptimas en digestores ATAD mediante estrategias de control robusto QFT", I International Congress on Water, Waste and Energy Management, Salamanca – Spain, May 23-25, 2012. (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Treatment and Management of Sludge and Solid Wastes

I. Lizarralde, L. Sancho, E. Ayesa , P. Grau, "Adding water chemistry to the WESTforINDUSTRY model library", i-SUP 2012 conference. Innovation for sustainable production. Bruges 6-9 May (2012 - Poster).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Industrial Water Systems

I. Lizarralde, M. de Gracia, L. Sancho, P. Grau , "Model-based optimization and risk assessment of water networks in food industry", i-SUP 2012 conference. Innovation for sustainable production. Bruges 6-9 May. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Industrial Water Systems

I. Lizarralde, F. Claeys, R. Ordóñez, M. de Gracia, L. Sancho, P. Grau , "New Mathematical model library for water network optimisation in a paper mill.", TAPPSA Berg Conference. Optimisation of Energy & Resources. (2012 - Platform presentation).

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies, Treatment and Management of Industrial Water Systems

I. Herrera, C. Buchart, D. Borro, "Adding Refined Isosurface Rendering and Shadow Mapping to vtkGPUVolumeRayCastMapper", The VTK Journal. 2012 January-December (April 2012) (Available with source code: http://hdl.handle.net/10380/3388.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

T. García, M. Revenga-Parra, L. Añorga*, S. Arana, F. Pariente, E. Lorenzo**, "Disposable DNA biosensor based on thin-film gold electrodes for selective Salmonella detection", Sensors & Actuators: B. Chemical.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems, Micro and Nano Systems

S. Beltrán, M. Maiza, A. De la Sota, J. M. Villanueva, E. Ayesa, "Advanced Data Manager for the Galindo Bilbao WWTP", InfoEnviro Vol. 75. Pp61-65 (2012).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M. Ortiz-Estevez, A. Aramburu, A. Rubio, "Getting DNA copy numbers without control samples", Algorithms for Molecular Biology, vol. 7, no. 19, 2012.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

M. Hernaez, P.M. Crespo, J. del Ser, "A Flexible Channel Coding Approach for Short-Length Codewords", IEEE Communications Letters, Vol:16, no, 9, pp. 1508-1511, September 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

H. García-Vázquez, Sunil L. Khemchandani, D. Ramos-Valido, A. Juanicorena, C. Luján-Martínez, J. del Pino, "A Fully integrated RF Front-End for DVB-SH", Microwave and Optical Technology Letters, vol. 54, no. 8, pp. 1944-1949, 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

H. Solar, E. Fernández, A. Juanicorena, U. Alvarado, G. Bistué, D. Valderas, "A wireless sensor platform for skin temperature and sweat index monitoring", Congreso 50 aniversario TECNUN.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

I. Beraza, I. Adin, J. del Portillo, B. Sedano, N. Perez, J. Mendizábal, "EMC precertification laboratory for railway communication equipment", Technologies Applied to Electronics Teaching (TAEE), pp. 222-227, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

C. Casanueva, A. Alonso, J.G. Giménez, "The Influence of Bearing Flexibility in High Speed Vehicles", Proceedings of the First International Conference on Railway Technology: research, development and Maintainance (RW2012), J. pombo (editor), Civil-Comp Press, Stirlingshire, Scotland. Las Palmas de Gran Canaria (Spain), 18-20 Abril 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

X. Insausti, P.M. Crespo, B. Beferull, "Distributed Computation of the Transition Matrix for Subspace Projection in Wireless Sensor Networks", ACM/IEEE Conference on Information Processing in Sensor Networks. Beijing, China (2012).

Publication type: Conference Proceeding.

Research fields: Integrated Circuits Design & Antennas, Railway Dynamics and Road Infrastructure

A. Erdozain, P.M. Crespo, B. Beferull-Lozano, "Multiple Description Analog Joint Source-Channel Coding to Exploit the Diversity in Parallel Channels", IEEE Transactions on Signal Processing, vol. 60, no. 11, pp. 5880-5892, Nov. 2012.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Download

G. Rafiq, B. O. Hogstad, M. Pätzold, "On the First and Second Order Statistics of the Capacity of N*Nakagami-m Channels", EURASIP Journal on Wireless Communications and Networking, 2rd review process.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

I. Alustiza, A. Erdozain, P. M. Crespo, B. Beferull-Lozano, "Multiple Description Analog Joint Source-Channel Coding for Parallel Channels with Side Information", 20th European Signal Processing Conference, Bucarest, Romania, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

I. Alustiza, A. Erdozain, P. M. Crespo, B. Beferull-Lozano, "Bandwidth-Reduction Analog Mappings for AWGN Channels with Side Information", 20th European Signal Processing Conference, Bucarest, Romania, 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

X. Insausti, P.M. Crespo, B. Beferull, "A Novel Gossip Algorithm for Subspace Projection using Computational Codes in Wireless Sensor Networks", ACM/IEEE Conference on Information Processing in Sensor Networks. Beijing, China (2012).

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

A. Erdozain, P. M. Crespo, B. Beferull, "Optimum distortion exponent in parallel fading channels by using analog joint source-channel coding schemes", Data Compression Conference, Snowbird (Utah, USA), April 2012.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

2011

L. Vázquez, A. Sancho, E.M. de Juan-Pardo, "Caracterización de biomateriales basados en colágeno para experimentos tridimensionales in-vitro", Proceedings del XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2011), pp.93-95, Cáceres, España, Noviembre 16-18, 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Tissue Engineering

J.M. Rodriguez Ibabe, P. Uranga, B. López , "Microstructural homogenisation in near net shape technologies", Meform 2011. Werkstoffkennwerte für die Simulation von Umformprozessen, 2011, pp. 155-171, Freiberg (Alemania).

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Rampin, M. Zanon, S. Saccarola, F. Castro, "Influence of selected alloying elements on the hardenability and fatigue strength of recently developed sinterhardening PM steels", EuroPM 2011 - Sintered Steels: Fatigue and Durability.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J. F. Osma, U. Moilanen, J. L. Toca-Herrera, S. Rodríguez-Couto , "Morphology and laccase production of white-rot fungi grown on wheat bran flakes under semi-solid-state fermentation conditions", FEMS Microbiology Letters 318 (1), 27-34 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

J. Rech, G. Kermouche, W. Grzesik, C. García-Rosales, A. Khellouki, V. García Navas, "Characterization and modeling of the surface integrity induced by belt finishing", Materials Processing Technology 208 (2008) 187-195.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

J.T. Celigüeta, "Aplicación de las técnicas de síntesis modal al análisis dinámico de sistemas mecánicos con componentes móviles", PhD Thesis Dissertation in September 1985. Ed. Universidad de Navarra. (February 2011), (ISBN 84-8081-139-0).

Publication type: Book.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

C. Buchart, "Study of Parallel Techniques Applied to Surface Reconstruction from Unorganized and Unoriented Point Clouds", PhD Thesis Dissertation in December 2010. Ed. Universidad de Navarra. (ISBN 84-8081-142-0).

Publication type: Book.

Research fields: Applied Mechanics, Computer Graphics

Download

D. Borro, "Colisiones en Estudios de Mantenibilidad con Restitución de Esfuerzos sobre Maquetas Digitales Masivas y Compactas", PhD Thesis Dissertation in July 2003. Ed. Universidad de Navarra. (February 2011), (ISBN 84-8081-143-9).

Publication type: Book.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

G. San Vicente, "Designing deformable models of soft tissue for virtual surgery planning and simulation using the Mas-Spring Model", PhD Thesis Dissertation in February 2011. (March 2011), (ISBN 84-8081-144-7).

Publication type: Book.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

C. Blanco, J.M. Carrero, K.G. Gebremedhin, A. Martín-Meizoso, "Criterios de fallo de la madera bajo carga multiaxial", Anales de Mecánica de la Fractura, nº 28, vol. 1, 2011.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. García de la Yedra, A. Martín-Meizoso, R. Rodríguez Martín, J.L. Pedrejón, "Thermomechanical fatigue behaviour and life prediction of C-1023 nickel based superalloy", Anales de Mecánica de la Fractura, nº 28, vol. 1, 2011.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. Lasaosa, A. Luque, J. Aldazabal, J.M. Martínez-Esnaola, J. Gil Sevillano, "Estudio del comportamiento mecánico de la intercara cobre-carbono mediante dinámica molecular", Anales de Mecánica de la Fractura, nº 28, vol. 2, 2011.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

J. F. Osma, J.L. Toca-Herrera, S. Rodríguez-Couto, "Environmental, scanning electron and optical microscope image analysis software for determining volume and occupied area of solid-state fermentation fungal cultures", Biotechnology Journal Volume 6, Issue 1, pages 45–55. January 2011.

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

S. Ausejo, "A New Robust Motion Reconstruction Method based on Optimization with Redundant Constraints and Natural Coordinates", PhD Thesis Dissertation in April 2006. Ed. Universidad de Navarra (March 2011), (ISBN 84-8081-152-8).

Publication type: Book.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

J. Hernantes, "Interacción en Sistemas Hápticos Multisensoriales: Respuesta de Colisión y Mejoras de Usabilidad", PhD Thesis Dissertation in December 2008. Ed. Universidad de Navarra (March 2011), (ISBN 84-8081-151-X).

Publication type: Book.

Research fields: Applied Mechanics, Computer Graphics, Haptic and Interfaces with Force Reflection

Download

J. Gutiérrez-Gutiérrez, I. Iglesias, A. Podhorski, "Geometric MMSE for one-sided and two-sided vector linear predictors: From the finite-length case to the infinite-length case", Signal Processing, vol. 91, pp. 2237-2245, 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

B.K. Tanner, J. Wittge, D. Allen, M.C. Fossati, A.N. Danilewsky, P. McNally, J. Garagorri, M.R. Elizalde, D. Jacques, "Thermal slip sources at the extremity and bevel Edge of silicon wafers", Journal of Applied Crystallography, Vol. 44, pp. 489-494 (2011).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

G. Ferrero, H. Monclús, L. Sancho, J. M. Garrido, J. Comas, I. Rodríguez-Roda. , "A knowledge-based control system for air-scour optimisation in membrane bioreactors", Water Science and Technology 63 (9), 2020-2031 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

A. Manteca, M. Mujika, S. Arana, "GMR sensors: Magnetoresistive behaviour optimization for biological detection by means of superparamagnetic nanoparticles", Biosensors and Biolectronics 26 (2011) 3705-3709.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Microelectronics & Microsystems, Biologic Microsystems, BioMEMS

P. Ansorena, A. Zuzuarregui, E. Pérez, M. Mujika, S. Arana, "Comparative analysis of QCM and SPR techniques for the optimization of immobilization sequences", Sensors & Actuators B - Chemical, 155 (Julio 2011) 667-672.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

J. Garagorri, E. Gorostegui, D. Allen, P. J. McNally, J. Wittge, M. C. Fossati, D. K. Bowen, B. K. Tanner, A. N. Danilewsky, D.Jacques, M.R .Elizalde, "Prediction of Catastrophic Silicon Wafer Breakage", EUROMAT2011, European Congress and Exhibition on Advanced Materials and Processes, Sept 2011 Montpellier, France.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

M. Balden, P. Starke, C. García-Rosales, C. Adelhelm, P. Sauter, I. López-Galilea, N. Ordás, A. Centeno, C. Blanco, J.M. Ramos Fernández, M. Martínez Escandell, "Compilation of erosion yields of metal-doped carbon materials by deuterium impact from ion beam and low temperature plasma", Journal of Nuclear Materials. October 2011, vol. 417, 612-615.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

J. Pey, J. Prada, J. E. Beasley, F. J. Planes, "Path finding methods accounting for stoichiometry in metabolic networks", Genome Biology (in press) Pey et al. Genome Biology 2011, 12:R49.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

Download

E. Gorostegui, B. Devincre, J. Gil-Sevillano, M.R. Elizalde, "A constitutive model for single crystal silicon derived from Dislocation Dynamics simulations", EUROMAT2011, European Congress and Exhibition on Advanced Materials and Processes, Sept 2011 Montpellier, France.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

P. López-Ruiz, N. Ordás, C. García-Rosales, F. Koch, S. Lindig, "Manufacturing of self-passivating W-CR-SI Alloys by mechanical alloying and hip", Fusion Engineering and Design.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

G. Liu, R. Berenguer, Y. Xu , "A mm wave configurable VCO using MCPW based tunable inductor in 65nm CMOS", IEEE Transactions on Circuits and Systems II, vol. 58, no. 12, pp. 842-846, December 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

P. López-Ruiz, N. Ordás, C. García-Rosales, S. Lindig, F. Koch, "Self-passivating bulk tungsten-based alloys manufactured by powder metallurgy ", POSTER “13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications” del 9 al 13 de mayo 2011 in Rosenheim, Alemania.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

P. López-Ruiz, N. Ordás, S. Lindig, F. Koch, C. García-Rosales, "Powder metallurgical processing of self-passivating tungsten alloys for fusion first wall application", POSTER: "15th International Conference on Fusion Reactor Material" del 16 al 22 de octubre en Charleston, USA.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Bereciartu, N. Ordás, C. García-Rosales, L. Sedano, "Manufacturing of porous SiC with dense coating for Flow Channel Inserts application", POSTER: 15th International Conference on Fusion Reactor Material” del 16 al 22 de octubre en Charleston, USA.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

J.M. Rodríguez Ibabe, P. Uranga, B. López, "Different roles of microalloying in thin slab direct rolling technologies", The 6th International Conference on High Strength Low Alloy Steels (HSLA Steels'2011), Pekin (China) Junio 2011.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

N. Pérez, T. Tavera, A. Rodríguez, M. Ellman, I. Ayerdi, S. M. Olaizola, "Fabrication of submicrometric metallic hollow-core channels by laser interference lithography", EMRS, Niza. 9-13 mayo 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

I. Castro-Hurtado, "Tin oxide nanowires grown by catalytic oxidation of tin sputtered thin films for the detection of toxic gases", EMRS, Niza. 9-13 mayo 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Manteca, M. Mujika, S. Arana, "Development of a novel method for the specific capture and magnetoresistive detection of food pathogens", Biosensors & Bioelectronics, 26, pp 3705-3709, 2011.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

G. G. Mandayo, J. Herrán, I. Castro-Hurtado, E. Castaño, "Performance of CO2 impedimetric sensor prototype for air quality monitoring", Sensors 11,5047-5057 (2011).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

N. Rodríguez, J.M. Sánchez, M. Aristizabal, "Consolidation of (Ti,Mo)(C,N)-Ni Cermets by Glass Encapsulated Hot Isostatic Pressing", Mat. Sci. and Eng. A, 528 (2011), 4453-4461.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

T. Gómez-Acebo, F. Castro, "Diffusion in Fe-Ni PM alloys: microstructureand DICTRA simulations", CALPHAD XL, Río de Janeiro, May 22-29, 2011, Comunicación Oral.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

G. Vélez, L. Matey, A. Amundarain, F. Ordás, J.A. Marín, "Real-Time Modelling and Rendering of Sprayed Concrete", Proceedings of the V Ibero-American Symposium in Computer Graphics (SIACG 2011), pp. 141-146. Faro, Portugal. June 1-3, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics

N. Pérez, A. Rodríguez, S.M. Olaizola, "Patterning and optical properties of materials at the nanoscale", Chapter 3 in the book: Fabrication and Characterization in the Micro-Nano Range, New Trends for two and three Dimensional Structures, Vol. 10, Lasagni, Fernando A.; Lasagni, Andrés F. (Eds.), 1st Edition., 201. ISBN 978-3-642-17781-1.

Publication type: Book Chapter.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Download

J.M. Rodríguez-Ibabe, P. Uranga, B. López, "Different Roles of Microalloying in Thin Slab Direct Rolling Technologies", Journal of Iron and Steel Research International, Vol. 18, Sup. 1-1, May 2011, pp. 459-465. .

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

C. García-Mateo, B. López, J. M. Rodriguez-Ibabe, "Warm Forged Medium Carbon V Steel", Journal of Iron and Steel Research International, Vol. 18, Sup. 1-2, May 2011, pp. 822-826.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

M. Rieth, J. L. Boutard, S. L. Dudarev, T. Ahlgren, S. Antusch, N. Baluc, M.-F. Barthe, C. S. Becquart, L. Ciupinski, J. B. Correia, C. Domain, J. Fikar, E. Fortuna, C.-C. Fu, E. Gaganidze, T. L. Galán, C. García-Rosales, B. Gludovatz, K. Heinola, N. Hols, "Review on the EFDA Programme on Divertor Materials Technology and Science", Journal of Nuclear Materials.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

J. Alkorta, J.M. Martínez-Esnaola, J. Gil Sevillano, "Towards a safe procedure to measure the elastic modulus in instrumented indentation", Philosophical Magazine 91, 1400-1408 (2011).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials, Thermomechanical Treatments

J. Gil Sevillano, "A Twist on heavily drawn wires", Wire Journal International nº 1, 58-70 (2011).

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. Bereciartu, N. Ordás, C. García-Rosales, A. Moroño, M. Malo, E. R. Hodgson, J. Abellà, L. Sedano, "Manufacturing and Characterization of Porous SiC for Flow Channel Inserts in Dual-Coolant Blanket Designs", Fusion Engineering and Design.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

D. Borro, J. Serván, J.M. Cordero, J., Sánchez, F. Mas, L. Matey, "Sistema de manos libres para ayuda de ensamblaje en Aeronáutica", Revista Dyna, Ingeniería e Industria, Vol. 86, No. 3, pp. 328-335. Junio-Julio, 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Computer Graphics

F.M. Ibanez, J.M. Echeverria, J. Vadillo, F. Martín, L. Fontán, "Battery response analyzer using a high current DCDC converter as an electronic load", Renewable Energy & Power Quality Journal (RE&PQJ)” with ISSN: 2172-038X.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

O. Moreno-Arotzena, E. de Juan-Pardo, S. Arana, "PDMS vs. COC in microfluidic systems for controlled in-vitro studies of 3D cell migration", Proceedings of II International Conference on Tissue Engineering (2011), pp. 175-180. IST Press, Edited by P.R. Fernandes, P.J. Bártolo, J. Folgado, H.C. Rodrigues, R.B. Ruben, H. Almeida and M.R. Dias. ISBN 978-989-8481-02-3.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

C. Casanueva, A. Alonso, I. Eciolaza, J.G. Giménez, "Estabilidad Dinámica en Vehículos con Ejes Flexibles y Ancho Variable", First European Forum on Running Gears. Madrid (Spain). 7-9 Junio 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

F.M. Ibanez, J.M. Echeverria, J. Vadillo, F. Martín, L. Fontán, "Battery Response Analyzer using a high current DCDC converter as an electronic load", International Conference on Renewable Energy and Power Quality (ICREPQ’11) – Gran Canaria, España.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

A. Martínez de Guereñu, M. Soto, F. Arizti, "Analysis of the frequency band to derive the magnetic Barkhausen noise signal using a configurable and computer-aided system for the simultaneous measurements of magnetic hysteresis loops and Barkhausen noise", 9th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM). University of Liberec, Czech Republic, 27-30 June, 2011. Proceedings of the 9th International Conference on Barkhausen Noise and Micromagnetic Testing.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

I. Castro-Hurtado, J. Herrán, G. G. Mandayo, E. Castaño, "Studies of the structural properties and thickness influence of NiO thin films on formaldehyde detection", Thin Solid Films 520, 947-952, (2011).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

K. Gurruchaga, A. Martínez de Guereñu, F. Arizti, I. Gutiérrez, "Caracterización de microestructura, textura y propiedades mecánicas en aceros a través de técnicas magnéticas no destructivas", 12º Congreso Español de Ensayos No Destructivos. Valencia, España, 15-17 Junio, 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

A. Rodriguez, A. Arriola, T. Tavera, N. Perez, S.M. Olaizola, "Enhanced depth control of ultrafast laser micromachining of microchannels in soda-lime glass", Microelectronic Engineering 98 (2012) 672-675.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems, Optoelectronic Microsystems

Download

M. X. Zambrano, A. Martínez de Guereñu, F. Arizti, "Desarrollo de un sistema de ensayos no destructivos para inspección de cables de acero", 12º Congreso Español de Ensayos No Destructivos. 12º Congreso Español de Ensayos No Destructivos. Valencia, España, 15-17 Junio, 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

G. Erkizia, E.M. de Juan-Pardo, G.-M. Kim, J. Aldazabal, "Computer simulation of manufacture and degradation of scaffolds", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011. .

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

G. Erkizia, E. de Juan-Pardo, I. Aldazabal, G.-M. Kim and J. Aldazabal, "Computer Simulation of Manufacture and degradation of Scaffolds", Termis2011, Granada (España), 7-10 Junio 2011..

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

G.-M. Kim, L. Muerza-Cascante, G. Erkizia, J. Aldazabal, E.de Juan-Pardo, "Well-Defined Patented Electrospun Nanofibrous Scaffolds for Nanomedicine", International Conference on Tissue Engineering 2011, Lisboa (Portugal), 2-4 Junio 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

G. Erkizia, E. de Juan-Pardo, G.-M. Kim, J. Aldazabal, "Computer simulation of manufacture, degradation and drug release of electrospun fibres", International Conference on Tissue Engineering 2011, Lisboa (Portugal), 2-4 Junio 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

G. Erkizia, G.-M. Kim, E. de Juan-Pardo, E. Imbulzqueta, E. Garbayo, M.J. Blanco-Prieto, "Computer Modelling of Drug Delivery Via PLGA Microparticles ", Euro Biomat 2011, Jena (Alemania), 13-14 Abril 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

G. Erkizia, E. de Juan-Pardo, G.M. Kim, A. Estella-Hermoso de Mendoza, E. Garbayo, M.J. Blanco-Prieto, "Computer Simulation of PLGA Micro/Nano Particles Degradation", Euro Biomat 2011, Jena (Alemania), 13-14 Abril 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Materials, Biorobotics and Surgical Simulation, Multiscale Mechanics of Materials

L. Gutiérrez, I. Aguinaga, B. Fierz, F. Ramos, M. Harders, "Pitting a New Hybrid Approach for Maintaining Simulation Stability after Mesh Cutting Against Standard Remeshing Strategies", Proceedings of the Computer Graphics International 2011 (CGI 2011). Ottawa, Canada. June 12-15, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

A. Luque, J. Aldazabal, JM. Martínez-Esnaola, A. Martín-Meizoso, J. Gil Sevillano, R. S. Farr, "Diffusional Monte Carlo model of liquid-phase sintering", Mathematics and Computers in Simulation, 81 (2011), 2564-2580.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

A. Bertelsen, D.Borro, "An ITK-Based Framework for 2D-3D Registration with Multiple Fixed Images", Insight Journal. 2011 January-June (May 2011) .

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

Download

M.Dominguis, H.de Rosario, J. J.Gil, J. Tenas, J. S. Solaz, "Development of an Integrated Upper Limb Vehicle Control: Haptic Drive-by-wire Device", 13th EAEC European Automotive Congress, Valencia, Spain, June 13-16, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

I. Pasciuto, A. Valero, S. Ausejo, J.T. Celigüeta, "A Hybrid Dynamic Motion Prediction Method with Collision Detection", Proceedings of the First Symposium on Digital Human Modeling (Paper awarded with "Best oral presentation" prize). Lyon, France, June 14-16, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

Download

A. Alonso, A. Guiral, E. Gomez, "Experimental determination of wheel rail contact forces", 9th International Conference on Contact Mechanics. Chengdu (China). 27-30 agosto 2012.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

A. Erdozain, P.M. Crespo, "Reconstruction of Aperiodic FRI Signals and Estimation of the Rate of Innovation Based on the State Space Method", Signal Processing, vol. 91, pp. 1709-1718, Agosto 2011.

Publication type: Scientific Journal.

Research fields: Information Theory, Coding & Compression Schemes for Communication Systems, Railway Dynamics and Road Infrastructure

A. Erdozain, P.M. Crespo, B. Beferull, "Analog Joint Source-Channel Multiple Description Coding Scheme over AWGN Parallel Channels", International Conference on Acoustics, Speech and Signal Processing (ICASSP 2011), Praga, Mayo 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

J.L. Lanzagorta, A. Martín-Meizoso, "3-point bending of bars and rods made of materials obeying a Ramberg-Osgood criterion", World Journal of Mechanics, 2011, 1, pp. 71-77.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials, Thermomechanical Treatments

D. Jorge-Badiola, J. L. Lanzagorta, I. Gutiérrez, "Combined Model to Describe Both the Mechanical and Microstructural Transients under a Reversal of Strain", Metallurgical and Materials Transactions A; Volume 42, Number 9 / September 2011 .

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

J. del Portillo, J.Mendizabal, I. Adín, J. Melendez, J. de No, U. Alvarado, "Functional, Thermal and EMC Analysis for a safety critical analogue design applied to a transportation system", Simultech 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. C. Rodríguez, L. Lozada, C. Tojal, T. Gómez-Acebo, F. Castro, "Thermodynamic aspects of liquid phase sintering B-containing P/M stainless steels", Solid State Phenomena Vols. 172-174 (2011) pp 1164-1170.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

Download

J. Pey, C. Theodoropoulos, A. Rezola, A. Rubio, M. Cascante, F.J. Planes, "Do elementary flux modes combine linearly at the "atomic" level? Integrating tracer-based metabolomics data and elementary flux modes", Biosystems (in press).

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation

J. Gutiérrez-Gutiérrez, P.M. Crespo, "Asymptotically Equivalent Sequences of Matrices and Multivariate ARMA Processes", IEEE Transactions on Information Theory, vol. 57, no. 8, pp. 5444-5454, August 2011. .

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

S. Bruni, J. Vinolas, M. Berg, O. Polach, S. Stichel, "Modelling of suspension components in a rail vehicle dynamics context", 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks - IAVSD 2011, Manchester (United Kingdom), 14-19 august 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

J. G. Prada, R.M. Goodall, J. Viñolas, "Potential ride performance of gas damper in the railway field", 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks - IAVSD 2011, Manchester (United Kingdom), 14-19 august 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Y. Bezin, A. Alonso, M. Zacher, B. Eickhoff, S. Iwnicki, J. Viñolas, "A study of the boundary conditions for the evaluation of railway track conicity", 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks - IAVSD 2011, Manchester (United Kingdom), 14-19 august 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

J.G. Prada, A. Alonso, J. Viñolas, X. Carrera, K. Reybrouck, J.G. Giménez, "Gas Dampers: model development and potential ride performance evaluation", Vehicle System Dynamics, Vol. 49, Nos. 1–2, January–February 2011, 199–218.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

C. Luno-Bilbao, I. Iturriza, G. Peña, A. Mancisidor, M. Sarasola, "Dry Cutting Diamond Impregnated Tools Based On Water Atomized Powders", European PM Conference, Barcelona, Spain (2011).

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

R. Genc, S. Rodríguez Couto, "Production of a Biopolymer at reactor scale: a Laboratory Class Experience", Journal of Chemical Education 88, 1175-1177 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

M. Pérez-Bahillo, N. Gubeljak, D. A. Porter, B. López, J. Predan, A. Martín-Meizoso, "Tensile Test Models for Low-Carbon Microalloyed Steels with High Niobium Contents", Technical Gazette, Vol. 18, nº 4, Dic. 2011. ISSN: 1330-3651.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

F. Osma, J.L. Toca-Herrera, S. Rodriguez-Couto, "Cost Analysis In Laccase Production", Journal of Environmental Management 92 (11), 2907-2912 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

Download

M. de Gracia, E. Huete, S. Beltrán, P. Grau, E. Ayesa, "Automatic characterisation of primary, secondary and mixed sludge inflow in terms of the mathematical generalised sludge digester model", Water Science and Technology 64 (3), 557–567 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

S. Gutiérrez, I. Sancho, L. Fontán, J. De Nó, "Effect of Protrusions in HVDC Cables", IEEE Transactions on Dielectrics and Electrical Insulation, vol 19 (2), pp 1774-1781.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

T. Fernández, P. Grau, S. Beltrán, E. Ayesa, "Integrated simulation of mass and energy for optimising operational strategies in WWTPs", Proceedings in the 8th IWA Symposium on Systems Analysis and Integrated Assessment (Watermatex 2011). 20-22 June, Donostia-San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

S. Beltrán, M. Maiza, A. De la Sota, J.M. Villanueva, J.V. Odriozola, E. Ayesa, "Model-based optimization of aeration systems in WWTPs", Proceedings in the 8th IWA Symposium on Systems Analysis and Integrated Assessment (Watermatex 2011). 20-22 June, Donostia-San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

I. Lizarralde, F.Claeys, R. Ordóñez, M. de Gracia, L. Sancho, P. Grau , "Water Network Optimization in a Paper Mill Based on a New Library of Mathematical Models", Proceedings in the 8th IWA Symposium on Systems Analysis and Integrated Assessment (Watermatex 2011). 20-22 June, Donostia-San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M. Maiza, A. Bengoechea, P. Grau, W. De Keyser, I. Nopens, D. Brockmann, J.P. Steyer, F. Claeys, G. Urchegui, E. Ayesa , "A multi-layer modelling software framework supporting the design of automatic control solutions in WWTPs", Proceedings in the 8th IWA Symposium on Systems Analysis and Integrated Assessment (Watermatex 2011). 20-22 June, Donostia-San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies

J.V. Odriozola, I. Lizarralde, A. Salterain, P. Grau, E. Ayesa, "Framework for the Numerical Solution of Biological Processes Described by the PWM Methodology", Proceedings in the 8th IWA Symposium on Systems Analysis and Integrated Assessment (Watermatex 2011). 20-22 June, Donostia-San Sebastián, Spain.

Publication type: Conference Proceeding.

Research fields: Environmental Engineering, Mathematical Modelling and Simulation of Environmental Processes and Technologies

N. Pérez, F.J. Sanza, A. Rodríguez, S.M. Olaizola, "Dependence of the order and crack density of polystyrene opals on volume fraction, humidity and temperature", Crystal Research and Technology, 46, No. 10, 1044-1050 (2011).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Alonso, G. Giménez, E. Gómez, "Yaw Damper Modelling and its influence on Railway Dynamic Stability", Vehicle System Dynamics, vol 49(9), pp. 1367-1387. 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

E. Gómez, J. G. Gimenez, A. Alonso, "Method for the reduction of measurement error associated to the wheel rotation in raylway dynamometric wheelsets", Mechanical Systems and Signal Processing, vol. 25 (8), pp. 3062-3077. November 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

S. Bruni, J. Vinolas, M. Berg, O. Polach, S. Stichel, "Modelling of Suspension Components in a rail vehicle dynamics context", Vehicle System Dynamics, vol 49 N7, pp. 1021-1072. July 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

I. Sesma, J. Vinolas, A. San Emeterio, J.G. Giménez, "A comparison of crosswind calculations using a full vehicle and a simplified 2D model", Proceedings of the Institution of Mechanical Engineers - Part F: Journal of Rail and Rapid Transit.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

Download

S. Rodríguez-Couto, "Production of laccase and decolouration of the textile dye Remazol Brilliant Blue R in temporary immersion bioreactors", Journal of Hazardous Materials 194, 297-302 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

N. Enayatzamir, F. Tabandeh, S. Rodríguez-Couto, B. Yakhchali, H. A. Alikhani, L. Mohammadi, "Biodegradation pathway and detoxification of the diazo dye Reactive Black 5 by Phanerochaete chrysosporium", Bioresource Technology 102, 10359–10362 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Bioprocesses for the Treatment of Industrial Effluents

G. Erkizia, E. de Juan-Pardo, G.-M. Kim, J. Aldazabal, "Computer simulation of manufacture, degradation and drug release of electrospun fibres", Proceedings of II International Conference on Tissue Engineering (2011), pp 83-88. IST Press, Edited by P.R. Fernandes, P.J. Bártolo, J. Folgado, H.C. Rodrigues, R.B. Ruben, H. Almeida and M.R. Dias. ISBN 978-989-8481-02-3.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Materials, Multiscale Mechanics of Materials, Tissue Engineering

A. Oregi, A.Elósegui, A.Gil-Rodrigo, I.G. Zubeldia, J. Lecanda, E. de Juan-Pardo, "Stiffening of tumor microenvironment is necessary for the activation of EMT under the effect of TGFß. 27.P2", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

L. Macri Pellizzeri, A. Sancho, O. Iglesias, B. Pelacho, E.de Juan-Pardo, F. Prósper, "Effect of substrate rigidity on iPS differentiation", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

A. Elosegui, A. Gil-Rodrigo, A. Oregi, R. Aldabe, E.de Juan-Pardo, "Development of computational tools for the quantification of key parameters involved in cell mechanics of tumor cells", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

A. Elosegui, A. Gil-Rodrigo, A. Oregi, C. Gazquez, R. Aldabe and E.M. de Juan-Pardo, "The non-acetylation of actin and tropomypsin disrupts the actin cytoskeleton in mammalian cells", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

A. Gil-Rodrigo, A. Elosegui, A. Oregi, R. Aldabe and E.M. de Juan-Pardo, "High-throughput measurements of cell traction forces of cancer cells", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

J. Arruabarrena, P. Uranga, B. López, J.M. Rodríguez Ibabe, "Carbide spheroidization kinetics in a low alloy medium carbon steel: Relevance of deformation after transformation", Proceedings of the Materials Science and Technology Conference, MS&T 2011, October 16-20, 2011, Columbus, Ohio, pp. 698-705.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

I. Castro-Hurtado, J. Herrán, N. Perez, S.M. Olaizola, G. García Mandayo, E. Castaño, "Toxic gases detection by NiO sputtered thin films", Sensor Letters 9, 1-5.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A.C. Leff, M. Grimes, M. Hartshorne, C.Winkler, P. Uranga, M.L. Taheri, "Direct Observation of the Effect of Solutes on Complex HSLA Steel Microstructures via In Situ TEM", Proceedings of the Materials Science and Technology Conference, MS&T 2011, October 16-20, 2011, Columbus, Ohio..

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

N. Isasti, D. Jorge-Badiola, M.L. Taheri, B. López, P. Uranga, "Effect of composition and deformation on coarse grained austenite transformation in Nb-Mo microalloyed steels", Metallurgical and Materials Transactions A, 2011, Vol. 42, no. 12, pp. 3729-3742.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

T. Tavera, N.Pérez, A. Rodríguez, P. Yurrita, S.M. Olaizola, E. Castaño, "Periodic patterning of silicon by direct nanosecond laser interference ablation", Applied Surface Science 258 (2011) 1175– 1180.

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

Jose A. Malumbres, Jorge Jimenez, Miguel Martinez-Iturralde, "Thermal Analysis of Surface-Mounted Permanent-Magnet Linear Motors Using A Lumped Parameter Thermal Model", 8th International Symposium on Linear Drives for Industry Applications (LDIA 2011), 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

H. Álvarez, I. Aguinaga, D. Borro, "Providing Guidance for Maintenance Operations Using Automatic Markerless Augmented Reality System", Proceedings of the 10th IEEE International Symposium on Mixed and Augmented Reality (ISMAR 2011), pp. 181-190 (ISBN: 978-1-4577-2184-7/10). Basel, Switzerland. October 26-29, 2011..

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Computer Graphics

Jorge Jimenez, Jose A. Malumbres, Miguel Martinez-Iturralde, "Analytical Computation of Asymmetrical Magnetic Circuits of Surface Mounted Permanent-Magnet Linear Motors with Distributed and Concentrated Winding", 8th International Symposium on Linear Drives for Industry Applications (LDIA 2011), 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

U. Alvarado, G. Bistué, I. Adín, "Low Power RF Circuit Design in Standard CMOS technology", "Lecture Notes in Electrical Engineering, 104, Ed. SPRINGER, ISBN 978-3-642-22986-2.

Publication type: Book.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

A. García de la Yedra, A. Martín-Meizoso, R. Rodríguez-Martín, J.L. Pedrejón, "Thermo-mechanical fatigue behaviour and life prediction of C-1023 nickel based superalloy", International Journal of Engineering, Science and Technology. Vol. 3, No. 6 (2011) pp. 88-101.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

C. García-Rosales, "Materials challenges for magnetically confined fusion devices", International Symposium on Plasmas and fusion energy: Basic science and technology. Madrid, 11 y 12 de abril de 2011.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A.J. Keung, E.M. de Juan-Pardo, D.V Schaffer, S. Kumar, "Rho GTPases Mediate the Mechanosensitive Lineage Commitment of Neural Stem Cells", Stem Cells 29, Issue 11 (2011) 1886–1897.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Tissue Engineering

L. Rancel, M. Gómez, S. F. Medina, I. Gutierrez, "Measurement of bainite packet size and its influence on cleavage fracture in a medium carbon bainitic steel", Materials Science and Engineering A, 2011, Vol. 530, pp. 21-27.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

S. Ausejo, A. Suescun, J.T. Celigüeta, "An Optimization Method for Overdetermined Kinematic Problems Formulated with Natural Coordinates", Multibody System Dynamics, Vol. 26, No. 4, pp. 397-410. 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Simulation of Mechanical Systems

I. Díaz, J.J. Gil, E. Sánchez, "Lower-Limb Robotic Rehabilitation. Literature Review and Challenges", Journal of Robotics, Vol. 2011, Article ID 759764, 11 pages, 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Haptic and Interfaces with Force Reflection

J. Del Ser, D. Manjarres, P.M. Crespo, S. Gil-Lopez, J. García-Frías, "Fusion of Distributed Decisions over the Gaussian Multiple Access Channel using Concatenated BCH-LDGM Codes", EURASIP Journal on Wireless Communications and Networking, vol. 2011, Article ID 825327, 12 pages, 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

J.M. Rodríguez-Ibabe, P. Uranga, B. López, "Some aspects regarding microstructural heterogeneities during steel processing", Procs. of the International Conference on Processing and Manufacturing of Advanced Materials, Thermec’2011, August 1-5, 2011, Quebec, Canada. Keynote.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

C. Klinkenberg, C. Bilgen, J.M. Rodríguez-Ibabe, B. Lopez, P. Uranga, "New Trends and Technologies in Thin-Slab Direct Rolling: Improved Microstructure & Mechanical Behavior", Procs. of the International Conference on Processing and Manufacturing of Advanced Materials, Thermec’2011, August 1-5, 2011, Quebec, Canada.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

M. Olasolo, P. Uranga, J.M. Rodriguez-Ibabe, B. López, "Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel", Materials Science and Engineering A 528 (2011) 2559–2569.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

Z. Aretxabaleta, B. Pereda, S.V. Parker, B. López, "Static Softening Behaviour in High Aluminum Steels", Procs. of the International Conference on Processing and Manufacturing of Advanced Materials, Thermec’2011, August 1-5, 2011, Quebec, Canada.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

R. Farr, A. Luque, A. Hoddle, "Theory for the failure stress of a quasi-equilibrium, brittle polycrystal with a small void fracion", Materials Science and Engineering A 528 (2011) 1694–1701.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

J. G. de Chavarri, J. Mendizabal Samper, A. Villaro, S. Urcelayeta, J.M. Blanco, A. Galarza, "R2wAC: Recursive Redundancy with Active Comparison", ESREL 2011, Troyes, Francia. Advances in Safety, Reliability and Risk Management: Chapter 72, pp. 580-584, 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Embedded Systems and Networks

Download

A. Jimenez, J. F. Sevillano, F. Arizti, R. Berenguer, I. Rebollo, "Nonius based time-to-digital converter for low-power RFID sensory systems", 2011 IEEE International Conference on RFID-Technology and Applications (RFID-TA), Sitges (Spain) , Sep. 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

J.S. Gutiérrez, I. Sancho, L. Fontán, J.A. Malumbres, "Influence of Voids within Electric Fields in HVDC cables", Jicable International Conference on Insulated Power Cables, Versailles, France. 20-23 junio 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

M. Rieth, J.L. Boutard, S.L. Dudarev, T. Ahlgren, S. Antusch, N. Baluc, M.F. Barthe, C.S. Becquart, L. Ciupinski, J.B. Correia, C. Domain, J. Fikar, E. Fortuna, C.C. Fu, E. Gaganidze, T.L. Galán, C. García-Rosales, B. Gludovatz, H. Greuner,, K. Heinola, N, "Review on the EFDA Programme on tungsten materials technology and science", Journal of Nuclear Materials 417 (2011) 463–467.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

Download

A. Jimenez, J.F. Sevillano, R.Berenguer, I. Rebollo, "Recursive Successive Approximation Time-to-Digital Converter for low-power RFID tag sensors", 26th Conference on Design of Circuits and Integrated Systems (DCIS), Grande Real Santa Eulália, Albufeira (Portugal), Nov. 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

M.H. Bocanegra-Bernal, J. Echeberria, J. Ollo, A. García-Reyes, C. Domínguez-Ríos, A. Reyes-Rojas, A. Aguilar-Elguezabal, "A comparison of the effects of multi-wall and single-wall carbon nanotube additions of the properties of zirconia toughened alumina composites", Carbon 49 (2011) 1599-1607.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F.M. Ibanez, J. Vadillo, J.M. Echeverria, L. Fontán, "High Current Rectifier topology applied to a 4kW bidirectional DC-DC converter", IEEE IAS International Conference – October 2011- Orlando, USA.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Industrial and Power Systems

Download

A. Pradera, G. Keith, F. Jacobsen, A. Rivas, N. Gil-Negrete, "Practical Computational Aeroacoustics for Compact Surfaces in Low Mach Number Flows", Acta Acustica united with Acustica, vol. 17(1), pp. 14-23. January/February 2011.

Publication type: Scientific Journal.

Research fields: Applied Mechanics, Noise and Vibration

J.L. Lanzagorta, A. Martín-Meizoso, "Flexión no lineal de materiales metálicos cuyo comportamiento se describe mediante una ley de Hollomon", Deformación Metálica, 320 (2011) 16-22.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials, Thermomechanical Treatments

A. Donoso-Bravo, S. Pérez-Elvira, E. Aymerich, F. Fdz-Polanco, "Assessment of the influence of thermal pretreatment time on the macromolecular composition and anaerobic biodegradability of the sewage sludge", Bioresource Technology 102 (2), 660-666 (2011).

Publication type: Scientific Journal.

Research fields: Environmental Engineering, Treatment and Management of Sludge and Solid Wastes

J. Alkorta, J. Gil Sevillano, "Assessment of elastic anisotropy and incipient plasticity in Fe3C by nanoindentation", Journal of Materials Research.

Publication type: Scientific Journal.

Research fields: Materials, Multiscale Mechanics of Materials

H. Solar, G. Bistué, J. Legarda, E. Gernández, R. Berenguer, "Behavioural Model for Fully Integrated High Performance Linear CMOS Power Amplifiers ", IET Microwave, Antennas & Propagation, Volume 5, Issue 7, pp. 795-803, July 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

J.L. González, H. Solar, I. Adín, D. Mateo, R. Berenguer , "A 16kV HBM RF ESD Protection Co-design for a 1 mW CMOS Direct Conversion Receiver operating in the 2.4 GHz ISM Band", IEEE Transactions on Microwave Theory and Techniques, Vol. 59, Issue 9, pp. 2318-2330, September 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

M. Losada, L. Zamora, U. Alvarado, I. Vélez, "Performance of an IEEE 802.15.4a Ranging System in Multipath Indoor Environments", IEEE International Conference on UWB, Bologna (Italy), Sept. 2011..

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Digital Signal Processing and Digital Implementation, Integrated Circuits Design & Antennas

M. Hernáez, P.M. Crespo, "A novel Scheme for Message-Forwarding in Ad-Hoc Wireless Networks", IEEE Vehicular Technology Conference (VTC2011-Spring) 15-18 May 2011, Budapest, Hungary.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

M. Hernáez, P.M. Crespo, J. del Ser, "Joint Non-Binary LDPC-BICM and Network Coding with Iterative Decoding for the Multiple Access Relay Channel", IEEE Vehicular Technology Conference (VTC2011-Spring) 15-18 May 2011, Budapest, Hungary.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

J. Pey, A. Rubio, J. E. Beasley, P. Crespo, F. J. Planes, "Exploring the Connectivity Structure in Metabolic Networks: Going Beyond Graphs Via Discrete Optimization", Exploring the Connectivity Structure in Metabolic Networks: Going Beyond Graphs Via Discrete Optimization, IEEE International Workshop on Statistical Signal Processing 2011 (SSP'11) Niza 28-30 June.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Bioinformatics

X. Insausti, P.M. Crespo, B. Beferull, "Concurrent and Distributed Projection through Local Interference for Wireless Sensor Networks", The 3rd International ICST Conference on Mobile Lightweight Wireless Systems, May 2011, Bilbao, Spain.

Publication type: Conference Proceeding.

Research fields: Information Theory, Coding & Compression Schemes for Communication Systems, Railway Dynamics and Road Infrastructure

S. Gutierrez, I. Sancho, L. Fontan, M. Martinez-Iturralde, "Influence of Irregularities within Electric Fields in High Voltage Cables", IEEE 2011 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, Cancun, Mexico, October, 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Instrumentation, Sensor and Non Destructive Testing Technologies

S.D’Souza, S. Pamarti, B. Agarwal, T. Sowlati, H. Zarei, R. Berenguer, F. Chang , "A Programmable Baseband Anti-Alias Filter for a Passive-Mixer-Based, SAW-less, Multi-Band, Multi-Mode WEDGE Transmitter", IEEE International Symposium on Circuits and Systems, Rio de Janeiro (Brazil) 15th – 18th May 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

J. Y. Liu, A. Tang, N.Y. Wang, Q.J. Gu, R. Berenguer, H.H. Hsieh, P.Y. Wu, C. Jou, F. Chang , "A V-band Self-Healing Power Amplifier with Adaptive Feedback Bias Control in 65nm CMOS", IEEE Radio Frequency Integrated Circuit Symposium (RFIC), Baltimore (USA) 5 - 7 June 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

E. Fernández, A. Beriain, H. Solar, A. García-Alonso, J. Sosa, J.M. Monzón, S. García-Alonso, J.A. Montiel-Nelson, R. Berenguer , "Low Power Voltage Limiter Design for a Full Passive UHF RFID Sensor", IEEE Midwest Symposium Circuit and Systems (MWSCAS), Seoul (Korea), 7-10 August 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

J. Gutiérrez-Gutiérrez, "Powers of complex persymmetric or skew-persymmetric anti-tridiagonal matrices with constant anti-diagonals", Applied Mathematics and Computation, vol. 217, pp. 6125-6132, 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

Q. Zhu, R. Berenguer, Y. Xu , "Ultra low power 900MHz/225MHz transceiver based on injection locking for a semi-active RFID sensor node", IEEE Midwest Symposium Circuit and Systems (MWSCAS), Seoul (Korea), 7-10 August 2011.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

A. Arriola, M.J. Withford, A. Rodriguez, A. Fuerbach, S.M. Olaizola, "Inscribed waveguides in borosilicate glass using ultrashort laser pulses for biosensing applications", VII Reunión española de optoelectrónica, Santander, 29jun-1Jul 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Rodríguez, A. Arriola, T. Tavera, N. Pérez, S.M. Olaizola, "Femtosecond laser micromachining of soda-lime glass for microfluidic applications", VII Reunión española de optoelectrónica, Santander, 29jun-1Jul 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Rodríguez, A. Arriola, T. Tavera, N. Pérez, S.M. Olaizola, "Optimization of the Laser Ablation Process of Soda-lime Glass for the Definition of Deep Microfluidic Channels", 37th International Conference on Micro and Nano Engineering, 19-23 September 2011, Berlin, Germany..

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Rezola, L.F. de Figueiredo, M. Brock, J. Pey, A. Podhorski, C. Wittmann, S. Schuster, A. Bockmayr, F.J. Planes, "Exploring metabolic pathways in genome-scale networks via generating flux modes", Bioinformatics, vol. 27, no. 4, 2011, pp 534-540.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

P. Rodríguez-Franco, A. Arriola, N. Darwish, H. Keshmiri, T. Tavera, S.M. Olaizola, M. Moreno, "Holographic lithography for photonic crystal surface emitting lasers", UK Semiconductors 2011, 6-7 July 2011, Sheffield, United Kingdom.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

M.C. Fuentes, I. Ayerdi, F.J. Gracia, "Topological and Electrical Analysis of Flexible Platinum Electrodes on Biocompatible PDMS Substrates", 5th European Conference of the International Federation for Medical and Biological Engineering, Budapest, Hungría, 14-18 Septiembre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

M.C. Fuentes, I. Ayerdi, F.J. Gracia, "”Skin-like” Microimplants: Towards a Cochlear Atraumatic Surgery", Workshop en Microsistemas y Nanotecnología. Asamblea Anual IBERNAM, Las Palmas de Gran Canaria, España, 2-3 Noviembre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

P. Ansorena, E. Pérez-Lorenzo, M. Mujika, S. Arana, "Optimization of a SAM for the Detection of TNF alpha using the Surface Plasmon Resonance Technique", 2nd International Bio-Sensing Technology Conference. Amsterdam, The Netherlands, 10-12 Octubre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Zuzuarregui, S. Sánchez-Gómez, E. Pérez-Lorenzo, M. Mujika, S. Arana, I. Moriyón, "Novel Electrochemical Sensor for Endotoxin Detection", 2nd International Bio-Sensing Technology Conference. Amsterdam, The Netherlands, 10-12 Octubre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

A. Zuzuarregui, E. Pérez-Lorenzo1, M. Mujika, S. Arana, S. Sánchez, G. Martínez de Tejada , "Desarrollo de un biosensor electroquímico para la detección de endotoxinas", XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, Cáceres, 16-18 Noviembre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

S. Beltrán, T. Fernández, J.V. Odriozola, M. Sainz, E. Ayesa, "Mathematical modelling and automatic control of WWTP", capitulo en libro: "Environmental Decision Support Systems (EDSSs). A tool for Wastewater Management in the XXI Century" M. Garrido and M. Poch (Eds.). Pags 83-116. ISBN:/978-84-8458-360-8/.

Publication type: Book Chapter.

Research fields: Environmental Engineering, Automatic Control of Environmental Engineering Technologies, Mathematical Modelling and Simulation of Environmental Processes and Technologies

M. Gomez, M. Mujika, S. Arana, D. Hansford, "Diseño de un bioMEMS con un sensor magnetorresistivo integrado", XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, Cáceres, 16-18 Noviembre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

S. Becerro, A. Benavente, J. Paredes, S. Arana, "Desarrollo de un sistema de multiplexado para la realización de medidas multiparamétricas en cultivos microbiológicos en laboratorio", XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica, Cáceres, 16-18 Noviembre 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Biologic Microsystems

E. de Juan Pardo, "Tissue Engineering and Regenerative Medicine: What can engineers do in this field? ", Korea-Spain Joint Conference (Chonnam National University Hwasun Hospital-University of Navarra), Gwangju, South Kore, May 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Tissue Engineering

P. López-Ruiz, N. Ordás, C. García-Rosales, S. Lindig, F. Koch, "Self-passivating bulk tungsten-based alloys manufactured by powder metallurgy", Physica Scripta T145, 2011.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders, Multiscale Mechanics of Materials

M.M. Alonso, R. Diez-Valle, L. Manterola, A. Rubio, D. Liu, "Genetic and Epigenetic Modifications of Sox2 Contribute to the Invasive Phenotype of Malignant Gliomas", PLoS ONE 6, vol. 6, no. 11, e26740, 2011.

Publication type: Scientific Journal.

Research fields: Biomedical Engineering, Bioinformatics

Download

F. Castro, S. Sainz, B. Lindsley, K.S. Narasimhan, W.B. James , "Microstructure and properties of Hybrid-Alloy Chromium Steels", EuroPM 2011 - Sintered Steels: Mechanical Properties.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, L. Lozada, "Thermodynamic Interpretation of Microstructural and Liquid Phase Development for a B-Containing PM Stainless Steel", EuroPM 2011 - Sintered Steels: Mn Containing Alloys.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

M. Pasupathy, J.M. Martín, I. Iturriza, F. Castro, "Effect of the Atomizer Geometrical Configuration of the Particle Size and Shape of Water Atomized Powders", EuroPM 2011 - Powder Manufacturing: Atomisation.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

A. Fuente, J. M. Martín, F. Castro, "Relationship between Microstructure and Hardness in Dual Phase Nickel Aluminides Prepared by Different Processing Routes", EuroPM 2011 - Non Ferrous & Special Materials.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Saccarola, M. Zanon, A. Karuppannagounder, F. Castro, "Influence of selected alloying elements on the hardenability and fatigue strength of recently developed sinterhardening PM steels", Advances in Powder Metallurgy and Particulate Materials 2011.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

S. Bueno, S. Saccarola, A. Karuppannagounder, A. Veiga, S. Sainz, F. Castro, "Lean Cr-Containing Powders for Obtaining High Performance PM Steel Grades", EuroPM 2011 - Sintered Steels: Mechanical Properties.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

L. Lozada, F. Castro, "Controlled densification of boron-containing stainless steels", Advances in Powder Metallurgy and Particulate Materials 2011.

Publication type: Scientific Journal.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

J.I. Sancho, J. Mendizabal, I. Gurutzeaga, A. Villaro, I. Adín, G. Bistué, "HF Antenna Design Optimization for Railway Spot Signalling Systems", Microwave and Optical Technology Letters, Vol. 53, No. 12, pp 2742-2746 December 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

Download

I. Suberviola, I. Mayordomo, J. Mendizabal, "Experimental Results of Air Target Detection With a GPS Forward-Scattering Radar", IEEE Geoscience and Remote Sensing Letters , Aug. 2011.

Publication type: Scientific Journal.

Research fields: Electronics & Communications, Integrated Circuits Design & Antennas

C. García-Mateo, B. López, J. M. Rodríguez-Ibabe, "Warm Forged Medium Carbon V Steel", Procs. of the 6th International Conference on High Strength Low Alloy Steels, HSLA’2011, Beijing, China, 2011, CD-Rom.

Publication type: Conference Proceeding.

Research fields: Materials, Thermomechanical Treatments

A. Bertelsen, J. Melo, E. Sánchez, D. Borro, "Implementation of a cooperative human-robot system for transpedicular fixation surgery", Proceedings of the XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2011), pp. 303-306. Cáceres, Spain. November 16-18, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics, Haptic and Interfaces with Force Reflection

G. Echegaray, I. Herrera, C. Buchart, D. Borro, "Towards a Multimodal Neurosurgery Simulator: Drilling Simulation and Visualization Using Real Patient Data", Proceedings of the XXIX Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2011), pp. 423-426. Cáceres, Spain. November 16-18, 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Biomedical Engineering, Biorobotics and Surgical Simulation, Computer Graphics

P.M. Crespo, "Capacity, Diversity-Multiplexing Gain, and Distortion Exponents in MIMO wireless Channels", MOBILIGHT 2011: 3rd International ICST Conference on Mobile Lightweight Wireless Systems, 9-11 Mayo, Bilbao.

Publication type: Conference Proceeding.

Research fields: Electronics & Communications, Information Theory, Coding & Compression Schemes for Communication Systems

E. Gómez, A. Alonso, J.G. Giménez, J. Viñolas, "Railway dynamometric wheelsets: a comparison of existing solutions and a proposal for the reduction of measurement errors", The First International Workshop on High Speed and Intercity Railway, IWHIR 2011. Hong Kong and Shenzen (PRC). 19-22 July 2011.

Publication type: Conference Proceeding.

Research fields: Applied Mechanics, Railway Dynamics and Road Infrastructure

F. Castro, "Microstructural development during sintering of high performance PM iron-based alloys", VI Congreso Internacional de Materiales, Bogotá, Colombia 27-30 Noviembre.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, "Alloy design and sintering of PM steels for high performance applications ", Institutsseminar im SS 2011 - Bochum, April 2011.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

F. Castro, "Sinter Hardening of PM Steels", Advanced in Powder Metallurgy & Particulate Materials - 2011.

Publication type: Conference Proceeding.

Research fields: Materials, Consolidation of Metallic and Ceramic Powders

C. García-Mateo, B. López, J. M. Rodriguez-Ibabe, "Effect of deformation temperature on microstructure and mechanical behaviour of warm working vanadium microalloyed steels", Journal of Materials Science (2011), Vol. 46, pp. 3725–3737.

Publication type: Scientific Journal.

Research fields: Materials, Thermomechanical Treatments

Download

J. G.Sevillano, J. M.Martínez-Esnaola, A. Martín-Meizoso, "Materials Engineering: Enabler for Improving Manufacturing", VIII ITP Technology Conference 2011, 14th-15th October, Guggemheim Museum, Bilbao.

Publication type: Conference Proceeding.

Research fields: Materials, Multiscale Mechanics of Materials

A. Neels, L. de Abreu Vieira, M. Döbeli, A. Dommann, J. Herrán, F. Neff, B. Widrig, H. Brändle and J. Ramm, "Formation of cubic zirconia by reactive arc evaporation in a mixture of nitrogen-oxygen reactive gas", Advanced Engineering Materials 13, 87–92 (2011).

Publication type: Scientific Journal.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Gil-Rodrigo, A. Elosegui, A. Oregi, R. Aldabe, E. de Juan-Pardo, "High-throughput measurements of cell traction forces of cancer cells", Tissue Engineering and Regenerative Medicine International Society European Annual Meeting 2011 (TERMIS-EU 2011), Granada, Spain, June 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Tissue Engineering

I. Castro-Hurtado, G.G. Mandayo, E. Castaño, "Thickness influence on gas sensing characteristics if NiO thin films for formaldehyde detection", 8th Spanish Conference on Electron Devices (CDE),Palma de Mallorca, 8-11 February 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Micro and Nano Systems

A. Elosegui, A. Gil-Rodrigo, A. Oregi, C. Gazquez, R. Aldabe and E.M. de Juan-Pardo, "The non-acetylation of actin and tropomypsin disrupts the actin cytoskeleton in mammalian cells", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Tissue Engineering

M. Fernández, M.C. Fuentes, I. Ayerdi, F.J. Gracia, "Fabrication and Characterization of Flexible Flat Electrodes for Biomedical Microdevices", 8th Spanish Conference on Electron Devices (CDE),Palma de Mallorca, 8-11 February 2011.

Publication type: Conference Proceeding.

Research fields: Microelectronics & Microsystems, Optoelectronic Microsystems

A. Elosegui, A. Gil-Rodrigo, A. Oregi, R. Aldabe, E.de Juan-Pardo, "Development of computational tools for the quantification of key parameters involved in cell mechanics of tumor cells", Histology and Histopathology, Cellular and Molecular Bioengineering 26 (supplement 1) 2011.

Publication type: Conference Proceeding.

Research fields: Biomedical Engineering, Tissue Engineering